MACP-010561 Temperature Compensated Directional RMS Power Detector Rev. V2 2 - 6 GHz Features Functional Schematic Integrated Directional Coupler Low Insertion Loss: 0.15 dB 4 GHz Min. detectable power: -15 dBm 4 GHz Dynamic range: 45 dB 4 GHz Built-In Temperature Compensation Lead-Free 1.5 x 1.2 mm 6-Lead TDFN Pkg Halogen-Free Green Mold Compound RoHS* Compliant and 260C Reflow Compatible Description The MACP-010561 belongs to a series of small, easy-to-use, broadband, directional detectors. With integrated low loss directional couplers and built-in temperature compensation circuits, these detectors 3 Pin Configuration provide an easy way to monitor the power of a signal travelling in a specific direction along a transmission Pin No. Pin Name Description line. Detectors are housed in a miniature, surface mount, lead less plastic package. They require a 1 RF RF Output OUT small amount of bias for proper performance. The total bias current is less than 0.5 mA. 2 N/A No Connection 3 RF RF Input IN Typical applications include power monitoring and leveling in Point-to-Point radios, IMS, Radar, VSAT, 4 V bias Bias Voltage EW, and Aerospace & Defense systems. 5 N/A No Connection The surface mount package is small yet can be 6 V det Output Voltage handled and placed with standard pick and place assembly equipment. Detectors are fabricated on a 3. Pins 2 and 5 are not connected internally and should not be well established GaAs process featuring full used for grounding. Package has exposed bottom metal passivation for performance and reliability. paddle which should be connected to the circuit GROUND. The parasitic inductance introduced by this connection should be as small as possible. 1,2 Ordering Information Part Number Package MACP-010561-TR1000 1000 piece reel MACP-010561-001SMB Sample Board 1. Reference Application Note M513 for reel size information. 2. All sample boards include 5 loose parts. * Restrictions on Hazardous Substances, European Union Directive 2002/95/EC. 11 1 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: MACP-010561 Temperature Compensated Directional RMS Power Detector Rev. V2 2 - 6 GHz Electrical Specifications: Freq. = 6 GHz, T = 25C, V = 3.2 V, Z = 50 (unless otherwise specified) A B 0 Parameter Test Conditions Units Min. Typ. Max. 2 GHz 0.10 Insertion Loss 4 GHz dB 0.15 6 GHz 0.25 0.5 10 dBm applied to Input 2 GHz 140 Detect Voltage mV 4 GHz 225 6 GHz 322 Into 50 load 2 GHz 17 Directivity dB 4 GHz 19 6 GHz 16 Minimum recommended power level 2 GHz -8 Sensitivity dBm 4 GHz -15 6 GHz -17 Maximum recommended power level Maximum Power dBm 30 2 - 6 GHz Input Return Loss 2 - 6 GHz dB 23 Output Return Loss 2 - 6 GHz dB 24 DC Offset Detect voltage with no RF input power mV 50 100 150 Bias Current V Bias = 3.2 V mA 0.3 0.35 4,5 Absolute Maximum Ratings Handling Procedures Parameter Absolute Maximum Please observe the following precautions to avoid damage: Input Power +40 dBm Operating Voltage 8 V Static Sensitivity Operating Temperature -40C to +85C Gallium Arsenide Integrated Circuits are sensitive to electrostatic discharge (ESD) and can be Storage Temperature -65C to +150C damaged by static electricity. Proper ESD control techniques should be used when handling these 4. Exceeding any one or combination of these limits may cause permanent damage to this device. devices. 5. M/A-COM Technology Solutions does not recommend sustained operation near these survivability limits. 22 2 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: