MACP-010563 Temperature Compensated Directional RMS Power Detector Rev. V2 10 - 30 GHz Features Functional Schematic Integrated Directional Coupler Low Insertion Loss: 0.5 dB 20 GHz Min. detectable power: -15 dBm 20 GHz Dynamic range: 45 dB 20 GHz Built-In Temperature Compensation Lead-Free 1.5 x 1.2 mm 6-Lead TDFN Halogen-Free Green Mold Compound RoHS* Compliant and 260C Reflow Compatible Description The MACP-010563 belongs to a series of small, easy-to-use, broadband, directional detectors. With integrated low loss directional couplers and built-in temperature compensation circuits, these detectors provide an easy way to monitor the power of a signal 3 Pin Configuration travelling in a specific direction along a transmission line. Detectors are housed in a miniature, surface Pin No. Pin Name Description mount, lead less plastic package. They require a small amount of bias for proper performance. The 1 RF RF Input IN total bias current is less than 0.5 mA. 2 N/C No Connection Typical applications include power monitoring and 3 V bias Bias Voltage leveling in Point-to-Point radios, IMS, Radar, VSAT, EW, and Aerospace & Defense systems. 4 V det Output Voltage 5 N/C No Connection The surface mount package is small yet can be handled and placed with standard pick and place 6 RF RF Output OUT assembly equipment. Detectors are fabricated on a well established GaAs process featuring full 7 GND Ground passivation for performance and reliability. 3. Pins 2 and 5 are not connected internally and should not be used for grounding. Package has exposed bottom metal paddle (Pin 7) which should be connected to the circuit ground. The parasitic inductance introduced by this connec- 1,2 tion should be as small as possible. Ordering Information Part Number Package MACP-010563-TR1000 1000 piece reel MACP-010563-001SMB Sample Board 1. Reference Application Note M513 for reel size information. 2. All sample boards include 5 loose parts. * Restrictions on Hazardous Substances, European Union Directive 2002/95/EC. 11 1 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: MACP-010563 Temperature Compensated Directional RMS Power Detector Rev. V2 10 - 30 GHz Electrical Specifications: Freq. = 20 GHz, T = +25C, V = 3.2 V, Z = 50 (unless otherwise specified) A B 0 Parameter Test Conditions Units Min. Typ. Max. 10 GHz 0.16 Insertion Loss 20 GHz dB 0.48 30 GHz 0.97 10 dBm applied to Input 10 GHz 221 Detect Voltage mV 20 GHz 470 30 GHz 806 Into 50 load 10 GHz 19.5 Directivity dB 20 GHz 16.0 30 GHz 10.8 Minimum recommended power level 10 GHz -11 Sensitivity dBm 20 GHz -17 30 GHz -22 Maximum recommended power level Maximum Power dBm 30 10 - 30 GHz Input Return Loss 10 - 30 GHz dB 16 Output Return Loss 10 - 30 GHz dB 17.5 DC Offset Detect voltage with no RF input power mV 50 100 150 Bias Current V Bias = 3.2 V mA 0.3 0.35 4,5 Absolute Maximum Ratings Handling Procedures Parameter Absolute Maximum Please observe the following precautions to avoid damage: Input Power +40 dBm Operating Voltage 8 V Static Sensitivity Operating Temperature -40C to +85C Gallium Arsenide Integrated Circuits are sensitive to electrostatic discharge (ESD) and can be Storage Temperature -65C to +150C damaged by static electricity. Proper ESD control techniques should be used when handling these 4. Exceeding any one or combination of these limits may cause permanent damage to this device. devices. 5. M/A-COM Technology Solutions does not recommend sustained operation near these survivability limits. 22 2 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: