MACP-010571 Temperature Compensated Directional Power Detector Rev. V2 2 - 6 GHz Features Functional Schematic Integrated Directional Coupler Low Insertion Loss: 0.2 dB 4 GHz Min. detectable power: -15 dBm 4 GHz RFOUT VDET 1 6 Built-In Temperature Compensation Lead-Free 1.5 x 1.2 mm 6-Lead TDFN Plastic Package Halogen-Free Green Mold Compound N/C 2 5 N/C RoHS* Compliant and 260C Reflow Compatible Description VBIAS 4 RFIN 3 The MACP-010571 belongs to a series of small, 7 easy-to-use, broadband, directional detectors. With 7 integrated low loss directional couplers and built-in GND temperature compensation circuits, these detectors provide an easy way to monitor the power of a signal 3 Pin Configuration travelling in a specific direction along a transmission line. Detectors are housed in a miniature, surface Pin Pin Name Description mount, lead less plastic package. They require a small amount of bias for proper performance. The 1 RF RF Output OUT total bias current is less than 0.5 mA. 3 2 N/C No Connection Typical applications include power monitoring and 3 RF RF Input IN leveling in Point-to-Point radios, IMS, Radar, VSAT, EW, and Aerospace & Defense systems. 4 V Bias Voltage BIAS 3 5 N/C No Connection The surface mount package is small yet can be handled and placed with standard pick and place 6 V Detector Voltage DET assembly equipment. Detectors are fabricated on a well established GaAs process featuring full 7 GND Ground passivation for performance and reliability. 3. Pins 2 and 5 are not connected internally and should not be used for grounding. Package has exposed bottom metal pad- dle (Pin 7) which should be connected to the circuit ground. The parasitic inductance introduced by this connection should 1,2 be as small as possible. Ordering Information Part Package MACP-010571-TR1000 1000 part reel MACP-010571-001SMB Sample Board 1. Reference Application Note M513 for reel size information. 2. All sample boards include 5 loose parts. * Restrictions on Hazardous Substances, compliant to current RoHS EU directive. 11 1 MACOM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: MACP-010571 Temperature Compensated Directional Power Detector Rev. V2 2 - 6 GHz Electrical Specifications: Freq. = 6 GHz, T = 25C, V = +3.2 V, Z = 50 (unless otherwise specified) A B 0 Parameter Test Conditions Units Min. Typ. Max. 2 GHz 0.09 Insertion Loss 4 GHz dB 0.17 6 GHz 0.26 0.5 10 dBm applied to Input 2 GHz 150 Detect Voltage mV 4 GHz 240 6 GHz 370 Into 50 load 2 GHz 16.5 Directivity dB 4 GHz 14.5 6 GHz 13.2 Minimum recommended power level 2 GHz -13 Sensitivity dBm 4 GHz -15 6 GHz -16 Maximum recommended power level Maximum Power dBm 30 2 - 6 GHz Input Return Loss 2 - 6 GHz dB 30 Output Return Loss 2 - 6 GHz dB 30 DC Offset Detect voltage with no RF input power mV 50 100 150 Bias Current V Bias = 3.2 V mA 0.3 0.35 4,5 Absolute Maximum Ratings Handling Procedures Parameter Absolute Maximum Please observe the following precautions to avoid damage: Input Power +40 dBm Operating Voltage 8 V Static Sensitivity Gallium Arsenide Integrated Circuits are sensitive to Operating Temperature -40C to +85C electrostatic discharge (ESD) and can be damaged Storage Temperature -65C to +150C by static electricity. Proper ESD control techniques should be used when handling these HBM Class 0A 4. Exceeding any one or combination of these limits may cause permanent damage to this device. devices. 5. MACOM does not recommend sustained operation near these survivability limits. 22 2 MACOM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: