Temperature Compensated Directional Power Detector 10 - 30 GHz MACP-010573 Rev. V2 Features Functional Schematic Integrated Directional Coupler Low Insertion Loss: 0.40 dB 20 GHz Min. detectable power: -18 dBm 20 GHz Directional Coupler Built-In Temperature Compensation RFOUT RFIN 1 6 Lead-Free 1.5 x 1.2 mm 6-Lead TDFN Plastic Package Termination RoHS* Compliant N/C 2 5 N/C Detector Engine Applications Point-to-Point Radios VBIAS 4 IMS 3 VDET Radar 7 7 VSAT GND EW Aerospace & Defense 3 Pin Configuration Description The MACP-010573 belongs to a series of small, easy-to-use, broadband, directional detectors. With 1 RF RF Input IN integrated low loss directional couplers and built-in temperature compensation circuits, these detectors 3 2 N/C No Connection provide an easy way to monitor the power of a signal travelling in a specific direction along a transmission 3 V Bias Voltage BIAS line. Detectors are housed in a miniature, surface 4 V Detector Voltage mount, lead less plastic package. They require a DET small amount of bias for proper performance. The 3 5 N/C No Connection total bias current is less than 0.5 mA. 6 RF Output RF OUT The surface mount package is small yet can be handled and placed with standard pick and place 7 GND Ground assembly equipment. Detectors are fabricated on a well established GaAs process featuring full 3. Pins 2 and 5 are not connected internally and should not be passivation for performance and reliability. used for grounding. Package has exposed bottom metal paddle (Pin 7) which should be connected to the circuit ground. The parasitic inductance introduced by this connection 1,2 should be as small as possible. Ordering Information MACP-010573-TR1000 1000 piece reel MACP-010573-001SMB Sample Board 1. Reference Application Note M513 for reel size information. 2. All sample boards include 5 loose parts. * Restrictions on Hazardous Substances, compliant to current RoHS EU directive. 11 1 MACOM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: Temperature Compensated Directional Power Detector 10 - 30 GHz MACP-010573 Rev. V2 Electrical Specifications: Freq. = 20 GHz, T = 25C, V = +3.2 V, Z = 50 (unless otherwise specified) A B 0 10 GHz 0.15 Insertion Loss 20 GHz dB 0.40 30 GHz 0.90 10 dBm applied to Input 10 GHz 240 Detect Voltage mV 20 GHz 495 30 GHz 745 Into 50 load 10 GHz 16.5 Directivity dB 20 GHz 13.0 30 GHz 11.5 Minimum recommended power level 10 GHz -13 Sensitivity dBm 20 GHz -18 30 GHz -21 Maximum recommended power level Maximum Power dBm 30 10 - 30 GHz Input Return Loss 10 - 30 GHz dB 15 Output Return Loss 10 - 30 GHz dB 18 DC Offset Detect voltage with no RF input power mV 50 100 150 Bias Current V Bias = 3.2 V mA 0.3 0.35 4,5 Absolute Maximum Ratings Handling Procedures Please observe the following precautions to avoid damage: Input Power 40 dBm Static Sensitivity Operating Voltage 8 V Gallium Arsenide Integrated Circuits are sensitive to Operating Temperature -40C to +85C electrostatic discharge (ESD) and can be damaged by static electricity. Proper ESD control techniques Storage Temperature -65C to +150C should be used when handling these HBM Class 0A 4. Exceeding any one or combination of these limits may cause devices. permanent damage to this device. 5. MACOM does not recommend sustained operation near these survivability limits. 22 2 MACOM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: