MADT-011000-DIE Power Detector Bare Die Rev. V1 5 - 44 GHz Features Functional Schematic Input Power: -15 to +15 dBm Dynamic Range: 30 dB DC supply: 4.5 V, 70 A Die size: 1.00 0.75 0.1 mm 1 Passivated Die Matching & bias ESD Protected RF IN RoHS* Compliant 2 V V V DET REF Description DC MADT-011000-DIE is a single-ended, internally- 3 matched power detector with wide frequency range and high dynamic range. The circuit consumes 70 A from a 4.5 V supply, while matched detector 4 5 6 7 and reference diodes provide temperature compensation in differential operation. The 100 m thick GaAs die is fully passivated for reliability and ease of handling. 2 Bond-pad Configuration MADT-011000-DIE is well suited for power control in microwave radios, test and measurement Pin Function equipment, and radar applications. 1 GND/NC MADT-011000-DIE is also available in a 3 mm QFN package. Refer to datasheet MADT-011000. 2 RFIN 3 GND/NC 4 VDET 1 Ordering Information 5 NC Part Number Package 6 VDC 1 MADT-011000-DIE Vacuum release gel pack 7 VREF 2 MADT-011000-SB2 Sample Board 8 GND 2. The die backside must be connected to RF, DC and thermal 1. Die quantity varies. ground. * Restrictions on Hazardous Substances, European Union Directive 2011/65/EU. 11 1 MACOM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: MADT-011000-DIE Power Detector Bare Die Rev. V1 5 - 44 GHz 3 Electrical Specifications: Freq. = 5 - 44 GHz, T = +25C, V = 4.5 V, Z = 50 A DC 0 Parameter Test Conditions Units Min. Typ. Max. Input Power dBm -15 +15 Dynamic Range Vref - Vdet > 5 mV dB 30 Vdelta Vdelta = Vref - Vdet mV 5 2200 5 - 10 GHz -11 -9 -12 -11 10 - 12 GHz Return Loss 12 - 36 GHz dB -11 -9 36 - 42 GHz -12 -9 42 - 44 GHz -9 -6.5 Supply Voltage V 4.5 Current Consumption A 60 70 80 3. All specifications refer to CW input signal. 4,5 6,7,8 Absolute Maximum Ratings Application Circuit Parameter Absolute Maximum MADT-011000-DIE Input Power 18 dBm RF IN VDC 6 V Operating Temperature -55C to +85C V DC Storage Temperature -65C to +150C 4. Exceeding any one or combination of these limits may cause permanent damage to this device. 5. MACOM does not recommend sustained operation near these V V DET REF survivability limits. 27k 4.5V 27k Handling Procedures Please observe the following precautions to avoid damage: 6. External 27 k resistors are required for optimum performance. Static Sensitivity 7. Typical Vref = 0.83V 8. Attach bare die to PCB or carrier using conductive epoxy These electronic devices are sensitive to electrostatic discharge (ESD) and can be damaged by static electricity. Proper ESD control techniques should be used when handling these Class 1B devices. 22 2 MACOM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: