MAMX-011021 High Linearity Mixer Rev. V1 5 - 35 GHz Features Functional Schematic Passive Frequency Mixer Conversion Loss: 8 dB 12 GHz High IIP3: 23 dBm 12 GHz LO RF Frequency: 5 - 35 GHz RF 1 6 (V ) G LO Frequency: 3 - 33 GHz IF Frequency: DC - 4.5 GHz Lead-Free 1.5 x 1.2 mm TDFN 6-lead Package 2 5 N/C N/C Halogen-Free Green Mold Compound RoHS* Compliant IF 3 4 V G (V ) D Description The MAMX-011021 is a passive mixer engine assembled in a 1.5 x 1.2 mm TDFN 6-lead plastic package. This device is designed for more linear 3 applications such as high bit rate transmitters and Pin Configuration receivers which may be used in Point-to-Point, Satcom or LAN applications. The mixer has 8 dB of Pin No. Pin Name Description conversion loss and 23 dBm of input intercept point (IIP3). 1 RF RF Port 2 N/C No Connection This mixer can be used for either lower sideband (LSB) or upper sideband (USB) mixing. Two of IF Port 3 IF (V ) D these mixers can be combined in a quadrature (optional Drain Voltage) configuration for image rejection. 4 V Gate Voltage (optional) G Positive bias voltage (< 1 V) can be applied to the 5 N/C No Connection LO or the V (optional) pin to reduce LO drive G requirements. The V pin is internally bypassed. G LO Port 6 LO (V ) G Positive bias voltage (< 1 V) can also be applied to (optional Gate Voltage) the IF pin to optimize device linearity. 4 7 Paddle Ground 3. MACOM recommends connecting No Connection pins to ground. 1,2 Ordering Information 4. The exposed pad centered on the package bottom must be connected to RF, DC and thermal ground. Part Number Package MAMX-011021-TR1000 1000 piece reel MAMX-011021-TR3000 3000 piece reel MAMX-011021-SMB Sample Board 1. Reference Application Note M513 for reel size information. 2. All sample boards include 5 loose parts. * Restrictions on Hazardous Substances, European Union Directive 2011/65/EU. 11 1 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: MAMX-011021 High Linearity Mixer Rev. V1 5 - 35 GHz Electrical Specifications: T = +25C, V = open, V = open, Z = 50 , A D G 0 IF Freq. = 2 GHz, LO Drive = 14 dBm 10 GHz, RF Freq. = 12 GHz Parameter Test Conditions Units Min. Typ. Max. 6 GHz 9.5 Conversion Loss 12 GHz dB 8.0 9.0 30 GHz 8.5 RF Return Loss 5 - 35 GHz dB 8 LO Return Loss 5 - 35 GHz dB 10 IF Return Loss DC - 4.5 GHz dB 12 Input P1dB dBm 15 Input IP3 P = -15 dBm dBm 23 IN 5,6 Absolute Maximum Ratings Handling Procedures Parameter Absolute Maximum Please observe the following precautions to avoid damage: Input Power 22 dBm Static Sensitivity Drain Voltage 2 V Gallium Arsenide Integrated Circuits are sensitive to electrostatic discharge (ESD) and can be Gate Voltage 1 V damaged by static electricity. Proper ESD control techniques should be used when handling these 7 Junction Temperature +150C Class 1A (HBM) devices. Operating Temperature -40C to +85C Storage Temperature -65C to +150C 5. Exceeding any one or combination of these limits may cause permanent damage to this device. 6. MACOM does not recommend sustained operation near these survivability limits. 7. Operating at nominal conditions with T +150C will ensure J 6 MTTF > 1 x 10 hours. 22 2 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: