Double-Balanced Mixer 5.5 - 19.0 GHz MAMX-011035 Rev. V3 Features Functional Schematic Low Conversion Loss: 6 dB Wide IF Bandwidth: DC - 6 GHz 12 11 10 IIP3 21 dBm 15 dBm LO Drive High Isolation 1 9 Lead-Free 3 mm 12-lead QFN package Lead-free and RoHS* Compliant LO RF 2 8 Applications 3 7 Test & Measurements IF Microwave Radio 4 5 6 Radar Description MAMX-011035 is a GaAs double-balanced passive diode mixer housed in a lead-free 3 mm, 12-lead 2,3 Pin Configuration QFN package. The mixer offers low conversion loss, high linearity and a wide IF bandwidth. The double- balanced circuit configuration provides excellent port isolation while internal 50 matching simplifies its application. 1,3,4,6,7,9 GND 2 LO 1 Ordering Information 5 IF 8 RF MAMX-011035 Bulk 2 10 - 12 NC MAMX-011035-TR0100 100 Piece Reel 3 13 GND MAMX-011035-TR0500 500 Piece Reel 2. MACOM recommends connecting unused package pins to ground. MAMX-011035-SB1 Sample Board 3. The exposed pad centered on the package bottom must be connected to RF, DC and thermal ground. 1. Reference Application Note M513 for reel size information. * Restrictions on Hazardous Substances, compliant to current RoHS EU directive. 11 1 MACOM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: Double-Balanced Mixer 5.5 - 19.0 GHz MAMX-011035 Rev. V3 4 Electrical Specifications : F = 100 MHz, P = 15 dBm, T = +25C, Z = 50 IF LO A 0 Parameter Test Conditions Units Min. Typ. Max. LO and RF Frequency GHz 5.5 19 IF Frequency GHz 0 6 LO Power dBm 15 Conversion Loss 5.5 - 19 GHz dB 6 8 5.5 - 10 GHz 8 Input P1dB dBm 10 - 19 GHz 11 P = -10 dBm/tone, f = 1 MHz RF Input IP3 5.5 - 10 GHz dBm 18 10 - 19 GHz 20 P = -10 dBm/tone, f = 1 MHz RF Input IP2 5.5 - 10 GHz dBm 45 10 - 19 GHz 45 5.5 - 10 GHz 38 LO-to-RF Isolation dB 10 - 19 GHz 34 5.5 - 10 GHz 28 40 LO-to-IF Isolation dB 10 - 19 GHz 32 45 5.5 - 10 GHz 10 15 RF-to-IF Isolation dB 10 - 19 GHz 21 30 4. All specifications refer to down-conversion operation, unless otherwise noted. 5,6 Absolute Maximum Ratings Handling Procedures Please observe the following precautions to avoid Parameter Absolute Maximum damage: LO Power 23 dBm Static Sensitivity These electronic devices are sensitive to electrostatic RF or IF Power 20 dBm discharge (ESD) and can be damaged by static electricity. 7 Junction Temperature +150C Proper ESD control techniques should be used when handling these devices with the following rating: Operating Temperature -55C to +85C HBM Class 1B CDM Class C5 Storage Temperature -65C to +150C 5. Exceeding any one or combination of these limits may cause Assembly Information permanent damage to this device. Do not subject the device to excessive force, 6. MACOM does not recommend sustained operation near these survivability limits. especially at elevated temperatures > 60C. 7. Operating at nominal conditions with T +150C will ensure J No-clean flux is required for assembly. Post SMT 6 MTTF > 1 x 10 hours. Thermal resistance, is 85C/W. JC washing is not recommended. Additional handling information is contained on page 6. 22 2 MACOM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: