MAMXSS0013 Low Cost MMIC Mixer Rev. V3 1400 - 2100 MHz Features Functional Block Diagram +12 dBm Input Power 1 dB Compression High Isolation, 28 dB LO to RF RF 4 3 +3 to +8 dBm LO Drive Level DC - 500 MHz 3 dB IF Bandwidth Does not require DC bias 2 Lead-Free SOT-25 Package 100% Matte Tin Plating over Copper L1 LO Halogen-Free Green Mold Compound IF 5 1 260C Reflow Compatible R1 C1 RoHS* Compliant Version of MD54-0006 Description M/A-COMs MAMXSS0013 is a passive mixer that Pin Configuration achieves the performance of a double balanced diode mixer in a lead-free SOT-25 package. The Pin No. Pin Name Description MAMXSS0013 is ideally suited for use where high 1 LO Port LO Input level RF signals and very wide dynamic range are required. Typical applications include frequency up/ 2 Ground Ground down conversion, modulation and demodulation in 3 Ground Ground receivers and transmitters for base station and 4 RF Port RF Input portable systems. 5 IF Port IF Output The MAMXSS0013 uses FETs as mixing elements to achieve very wide dynamic range in a low cost 2,3 plastic package. The mixer operates with LO drive External Circuitry Parts List levels of +3 dBm to +8 dBm. The LO port may be externally tuned for operation in various frequency LO Frequency bands. Part 1500 MHz 1710 MHz 2300 MHz M/A-COMs MAMXSS0013 is fabricated using a R1 470 470 820 mature 0.5 micron gate length GaAs MESFET L1 6.8 nH 4.7 nH 2.7 nH process. The process features full passivation for increased performance and reliability. The C1 3.3 pF 2.2 pF 2.2 pF MAMXSS0013 is 100% RF tested to ensure 2. The external LO matching network allows tuning from 1400 performance specification compliance. MHz to 2300 MHz. The networks given above are 1 intended to serve as guidelines for matching in different bands. Ordering Information 3. All off-chip components are low-cost surface mount components obtainable from multiple sources (0.060 in. x Part Number Package 0.030 in. or 0.080 in. x 0.050 in). MAMXSS0013 Bulk Packaging MAMXSS0013TR-3000 3000 piece reel MAMX-000013-001SMB Sample Board 1500 MHz MAMX-000013-002SMB Sample Board 1710 MHz MAMX-000013-003SMB Sample Board 2300 MHz 1. Reference Application Note M513 for reel size information. * Restrictions on Hazardous Substances, European Union Directive 2002/95/EC. 11 1 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: MAMXSS0013 Low Cost MMIC Mixer Rev. V3 1400 - 2100 MHz 4 Electrical Specifications : RF = 1850 MHz (-10 dBm), LO = 1710 MHz (+5 dBm), IF = 140 MHz, T = 25C A Parameter Test Conditions Units Min. Typ. Max. Conversion Loss dB 8.0 9.0 LO to RF dB 28 Isolation LO to IF dB 15 RF to IF dB 15 RF Port Ratio 2.0:1 3 VSWR LO Port Ratio 2.0:1 IF Port Ratio 2.0:1 Input 1 dB Compression LO = +5 dBm, RF Freq: 1850 MHz dBm 12 Two Tones at -10 dBm each, Tone spacing = 100 KHz, 5 Two-Tone IM Ratio dBc 55 IF = 140 MHz 4. With external LO Port matching. See functional block diagram. 5. IMR vs. RF drive can be calculated by the formula: IMR = 40-1.5*Pin. 6,7 Absolute Maximum Ratings Spurious Table 41.3 45.4 64.7 57.0 Parameter Absolute Maximum 38.3 27.3 4x 39.9 52.5 77.1 78.7 RF Input Power +27 dBm 30.1 69.0 43.0 68.3 21.4 10.5 3x 30.1 70.5 58.8 76.8 LO Drive Power +27 dBm 9.0 36.1 36.0 65.8 64.3 Operating Temperature -40C to +85C 2x -0.9 36.4 45.8 75.0 78.0 Storage Temperature -65C to +150C 1.9 0 44.8 56.1 65.0 1x -6.0 0 55.5 75.2 78.3 6. Exceeding any one or combination of these limits may cause permanent damage to this device. X 8.1 45.5 56.8 72.9 0x 7. M/A-COM does not recommend sustained operation near X 8.3 54.4 72.3 74.3 these survivability limits. 0x 1x 2x 3x 4x Harmonic of RF The spurious table shows the spurious signals resulting from the mixing of the RF and LO input signals, assuming down conversion. Mixing products are indicated relative to the IF. The lower frequency mixing term is shown for two different RF input levels. The top number is for an RF input power of 0 dBm, the lower number is for -10 dBm. nF - mF , RF = 0 dBm RF LO nF - mF , RF = -10 dBm RF LO RF Frequency = 1850 MHz LO Frequency = 1710 MHz 22 2 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: