MDS-223-PIN MACOM

MDS-223 Surface Mount Double-Balanced Mixer, Rev. V4 10 - 500 MHz Features SF-1 Fully Hermetic Package Low Cost Conversion Loss: 7 dB Typical Midband Impedance: 50 Ohms Nominal Maximum Input Power: 400 mW Max, Derated to 85C 3.2 mW/C X Port Current: 50 mA Max. MIL-STD-883 Screening Available Description Transformers convert the LO and RF paths to balanced lines connecting to a medium barrier, Schottky diode ring quad. These transformers help provide excellent isolation between ports. Conversion loss is low. The direct connection of the IF port to the diode quad allows these mixers to be used as phase detectors and bi-phase modulators. 1 Electrical Specifications : T = -55C to +85C A Parameter Test Conditions Frequency Units Min Typ Max Frequency Range RF, LO Ports 10 - 500 MHz IF Port DC - 500 MHz Conversion Loss 5 - 150 MHz dB 7.0 150 - 500 MHz dB 9.0 Isolation LO to RF 5 - 150 MHz dB 40 150 - 500 MHz dB 35 LO to IF 5 - 150 MHz dB 35 150 - 500 MHz dB 25 RF to IF 5 - 150 MHz dB 25 150 - 500 MHz dB 20 DC Polarity Negative DC Offset mV <1 RF Input 1 dB Compression dBm +2.5 1 dB Desensitization dBm 0 SSB Noise Figure Within 1 dB of Conversion Loss Max Typical Two-Tone IM with a 10 dBm input, each input, 100 - 350 MHz dB 55 Ratio 25 MHz and 35 MHz IF 350 - 500 MHz dB 40 1. All specifications apply when operated at +7 dBm available LO power with 50 ohm source and load impedance. 1 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: MDS-223 Surface Mount Double-Balanced Mixer, Rev. V4 10 - 500 MHz Typical Performance Curves Bottom View of SF-1 4X .016 .002 .506 .385 Ref .220 .381 .165 .002 .000 Ordering Information Pin Configuration Part Number Package MDS-223 PIN SF-1 Pin No. Function Pin No. Function 1 GND 3 LO 2 IF 4 RF 2 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: