XX1000-QT-EV1 MACOM

Active Doubler 7.5 - 25.0 / 15.0 - 50.0 GHz XX1000-BD Rev. V3 0.295 0.695 (0.012) (0.027) Features Chip Device Layout Excellent Broadband Mixer Driver 1.620 Single Ended Fed Doubler with Distributed Buffer (0.064) 2 3 Amplifier Excellent LO Driver for MACOM Receivers +15 dBm Output Drive 100% On-Wafer RF, DC and Output Power Testing 100% Visual Inspection to MIL-STD-883 Method 2010 0.791 RoHS* Compliant 1 (0.031) Applications Point-to-Point Radio Microwave LMDS 0.196 SATCOM 4 (0.008) VSAT 7 6 5 0.0 Description 0.0 1.560 0.295 0.494 0.894 This single ended fed (no external balun required) (0.061) (0.012)(0.019) (0.035) 7.5 - 25.0 / 15.0 - 50.0 GHz GaAs MMIC doubler has 1 Pad Configuration (Note:Engineering designator is40DBL0458) a 15 dBm output drive and is an excellent LO doubler that can be used to drive fundamental mixer Pad Function Description Units:millimeters(inches) Bond pad dimensionsare shown to center of bond pad. devices. It is also well suited to drive MACOMs Thickness:0.110 +/- 0.010 (0.0043 +/- 0.0004),Backside isground,Bond Pad/Backside Metallization:Gold XR1002 receiver device. 1 RF RF Input All Bond PINadsare 0.100 x 0.100 (0.004 x 0.004). Bond pad centersare approximately 0.109 (0.004) from the edge of the chip. This MMIC uses a GaAs pHEMT device model Dicing2 tolerance:+V/- 01. 005 (+/- 0Drai.0002n) Vo.Apltaprgoex Stimaatgeew 1e ight:1.566 mg. D technology, and is based upon electron beam lithography to ensure high repeatability and Bond Pad 1 (RFIn) Bond Pad 3 (Vd2) Bond Pad 5 (Vg2) Bond Pad 7 (Vg1) 3 V 2 Drain Voltage Stage 2 D uniformity. The chip has surface passivation to Bond Pad 2 (Vd1) Bond Pad 4 (RFOut) Bond Pad 6 (Vss) protect and provide a rugged part with backside via 4 RF RF Output OUT holes and gold metallization to allow either a conductive epoxy or eutectic solder die attach 5 V 2 Gate Voltage Stage 2 G process. 6 V Source Supply Voltage SS 7 V 1 Gate Voltage Stage 1 G Ordering Information 1. Backside metal is RF, DC and thermal ground. XX1000-BD-000V vacuum release gel paks XX1000-BD-EV1 evaluation board * Restrictions on Hazardous Substances, compliant to current RoHS EU directive. 11 1 MACOM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: htt p s:// ww w.m a com . com / su p por t DC-0007731 Active Doubler 7.5 - 25.0 / 15.0 - 50.0 GHz XX1000-BD Rev. V3 Electrical Specifications: Input Freq. = 7.5 - 25 GHz, T = 25C A Output Frequency Range GHz 15 50 Input Return Loss dB 12 Output Return Loss dB 12 Harmonic Gain dB 13 Fundamental Rejection dBc 20 Saturated Output Power dBm 15 RF Input Power dBm -10 +10 Output Power at 0 dBm P dBm 13 IN Drain Bias Voltage (V 1,2) VDC 5.0 5.5 D Gate Bias Voltage (V 1) VDC -1.2 -0.6 +0.1 G Gate Bias Voltage (V 2) VDC -1.2 0.0 +0.1 G Drain Current (I 1,2) D mA 265 280 (V = 5.0 V, V 1 = -0.6 V, V = 0 V Typical) D G G Source Voltage (V ) VDC -5.5 -5.0 -2.0 SS Source Current (I ) mA 25 50 60 SS 2 Absolute Maximum Ratings Handling Procedures Please observe the following precautions to avoid Parameter Absolute Maximum damage: Drain Voltage (V 1, V 2) +6 V D D Static Sensitivity Source Voltage (V ) -6 V SS These electronic devices are sensitive to Drain Current (I 1+I 2) 320 mA D D electrostatic discharge (ESD) and can be damaged by static electricity. Proper ESD control techniques Source Current (I ) 60 mA SS should be used when handling these Class 2 Gate Bias Voltage (V 1) +0.3 V devices. G Gate Bias Voltage (V 2) +0.1 V G RF Input Power +12 dBm Storage Temperature -65C to +165C Operating Temperature -55C to MTTF Table Channel Temperature MTTF Table 2. Channel temperature directly affects a device s MTTF. Channel temperature should be kept as low as possible to maximize lifetime. 22 2 MACOM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: htt p s:// ww w.m a com . com / su p por t DC-0007731