150W Single Output with PFC Function ASP-150 series % & , ( ) * +) - . & / ) % 0-123+ 4 5 54 ) , ) SPECIFICATION MODEL ASP-150-12 ASP-150-15 ASP-150-20 ASP-150-24 ASP-150-48 DC VOLTAGE 12V 15V 20V 24V 48V RATED CURRENT 11A 9.5A 7.5A 6.3A 3.2A CURRENT RANGE 0 ~ 11A 0 ~ 9.5A 0 ~ 7.5A 0 ~ 6.3A 0 ~ 3.2A RATED POWER 132W 142.5W 150W 151.2W 153.6W RIPPLE & NOISE (max.) Note.2 150mVp-p 180mVp-p 200mVp-p 240mVp-p 240mVp-p 11 ~ 13.2V 14 ~ 17V 17 ~ 22V 22 ~ 27V 45.6 ~ 52.8V OUTPUT VOLTAGE ADJ. RANGE Fixed. Can be modified between the range above by factory VOLTAGE TOLERANCE Note.3 2.0% 2.0% 1.0% 1.0% 1.0% LINE REGULATION 0.5% 0.5% 0.5% 0.5% 0.5% LOAD REGULATION 1.0% 1.0% 0.5% 0.5% 0.5% SETUP, RISE TIME 3000ms, 80ms at full load HOLD UP TIME (Typ.) 50ms/230VAC 16ms/115VAC at full load VOLTAGE RANGE 90 ~ 264VAC 127 ~ 370VDC FREQUENCY RANGE 47 ~ 63Hz POWER FACTOR (Typ.) PF0.95/230VAC PF 0.98/115VAC at full load INPUT EFFICIENCY (Typ.) 88% 88% 90% 90% 89% AC CURRENT (Typ.) 2A/115VAC 1A/230VAC INRUSH CURRENT (Typ.) COLD START 80A/230VAC LEAKAGE CURRENT <2mA / 240VAC 105 ~ 135% rated output power OVERLOAD Protection type : Hiccup mode, recovers automatically after fault condition is removed 13.7 ~ 16.2V 17.5 ~ 20.25V 22.5 ~ 28V 27.5 ~ 32.4V 53.3 ~ 64.8V PROTECTION OVER VOLTAGE Protection type : Shut down o/p voltage, re-power on to recover 9010(RTH2) detect on heatsink of power transistor OVER TEMPERATURE Protection type : Shut down o/p voltage, re-power on to recover WORKING TEMP. -20 ~ +60 (Refer toDerating Curv) WORKING HUMIDITY 20 ~ 90% RH non-condensing -20 ~ +85, 10 ~ 95% RH ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT 0.05%/ (0 ~ 50) VIBRATION 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes SAFETY STANDARDS UL60950-1, CB(IEC60950-1) approved WITHSTAND VOLTAGE I/P-O/P:4.25KVDC I/P-FG:2.0KVAC O/P-FG:0.5KVAC SAFETY & ISOLATION RESISTANCE I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25/ 70% RH EMC (Note 4) Compliance to EN55022 (CISPR22) Class B, EN61000-3-2,-3 EMC EMISSION EMC IMMUNITY Compliance to EN61000-4-2,3,4,5,6,8,11, light industry level, criteria A MTBF 149.3Khrs min. MIL-HDBK-217F (25) OTHERS DIMENSION 169*60.7*28.5mm (L*W*H) PACKING 0.32Kg 48pcs/15.8Kg/0.79CUFT - % / 6 % % 3, 4 3 %& % NOTE 3 7 8 % 3 9(: & ) & -3 ) ) % ) - 8 +< , 6 + 6 ) % ) & = % 6 = % % & % % >9 ) % >9 >9 % ) A B & ))) % ) %C ( D ( - ( , 8 ( 3 ( , & File Name:ASP-150-SPEC 2015-07-174-3.3 150W Single Output with PFC Function ASP-150 series Mechanical Specification Unit:mm 169 3.5 160.5 M1 HS1 LED CN1 5 4 6 3 5 2 HS3 4 1 3 FS1 2 1 AC FUSE CN2 T4A/250V M2 HS2 AC Input Connector (CN1) : JST B5P-VH or equivalent DC Output Connector (CN2) : JST B6P-VH or equivalent Pin No. Assignment Mating Housing Terminal Pin No. Assignment Mating Housing Terminal 1 AC/L 1,2,3 -V JST VHR JST SVH-21T-P1.1 or equivalent or equivalent 2,4 No Pin JST VHR JST SVH-21T-P1.1 4,5,6 +V or equivalent or equivalent 3 AC/N HS1, HS3 & HS2,HS3 cannot be shorted 5 FG : Grounding Required CN1:Pin5,M1 and M2 are Safety ground and should all be grounded. Block Diagram EMI FILTER RECTIFIERS POWER PFC +V I/P & & SWITCHING CIRCUIT -V RECTIFIERS FILTER DETECTION FG O.L.P. CIRCUIT PWM PFC CONTROL CONTROL O.V.P. Derating Curve Output Derating VS Input Voltage 100 100 90 80 80 70 60 60 40 50 20 40 -20 0102030405060 70 (HORIZONTAL) 90 100 110 135 155 230 264 AMBIENT TEMPERATURE () INPUT VOLTAGE (V) 60Hz File Name:ASP-150-SPEC 2015-07-17 LOAD (%) 60.7 3 max. 28.5 max. 50.7 5 LOAD (%)