75W Single Output with PFC Function ELP-75 series Features : Universal AC input / Full range Built-in active PFC function, PF>0.95 High efficiency up to 90% Optional L-Bracket and cover (ELP-75-x-C, x=3.3,5,12,15,24,36,48) Protections: Short circuit / Overload / Over voltage Cooling by free air convection 1U low profile LED indicator for power on No load power consumption<0.5W 3 years warranty SPECIFICATION MODEL ELP-75-3.3 ELP-75-5 ELP-75-12 ELP-75-15 ELP-75-24 ELP-75-36 ELP-75-48 12V 24V 36V DC VOLTAGE 3.3V 5V 15V 48V RATED CURRENT 15A 15A 6.25A 5A 3.15A 2.1A 1.6A CURRENT RANGE 0 ~ 15A 0 ~ 15A 0 ~ 6.25A 0 ~ 5A 0 ~ 3.15A 0 ~ 2.1A 0 ~ 1.6A 75W 75.6W 75.6W RATED POWER 49.5W 75W 75W 76.8W RIPPLE & NOISE (max.) Note.2 80mVp-p 80mVp-p 120mVp-p 150mVp-p 240mVp-p 280mVp-p 300mVp-p VOLTAGE ADJ. RANGE 10.8 ~ 13.2V 21.6 ~ 26.4V 32.4 ~ 39.6V 3 ~ 3.6V 4.75 ~ 5.5V 13.5 ~ 16.5V 43.2 ~ 52.8V OUTPUT 2.0% 1.0% 1.0% VOLTAGE TOLERANCE Note.3 3.0% 2.0% 2.0% 1.0% 0.5% LINE REGULATION 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% LOAD REGULATION 2.0% 1.5% 1.0% 1.0% 1.0% 1.0% 1.0% SETUP, RISE TIME 2500ms, 50ms/230VAC 2500ms, 50ms/115VAC at full load HOLD UP TIME (Typ.) 20ms/230VAC 20ms/115VAC at full load VOLTAGE RANGE Note.6 90 ~ 264VAC 127 ~ 370VDC FREQUENCY RANGE 47 ~ 63Hz POWER FACTOR (Typ.) Note.5 3.3V: PF>0.91/230VAC 5V~48V: PF>0.95/230VAC PF>0.98/115VAC at full load INPUT EFFICIENCY (Typ.) 80% 82% 89% 90% 90% 90% 90% AC CURRENT (Typ.) 1.8A/115VAC 1 A/230VAC INRUSH CURRENT (Typ.) COLD START 60A/230VAC LEAKAGE CURRENT <1mA/240VAC 105 ~ 150% rated output power OVER LOAD Protection type : Hiccup mode, recovers automatically after fault condition is removed PROTECTION 3.7 ~ 4.45V 5.6 ~ 6.75V 13.8 ~ 16.2V 17.25 ~ 20.25V 27.6 ~ 32.4V 39.7 ~ 46.8V 53.3 ~ 64.8V OVER VOLTAGE Protection type : Shut down o/p voltage, re-power on to recover -30 ~ +70 (Refer toDerating Curv) WORKING TEMP. 20 ~ 90% RH non-condensing WORKING HUMIDITY -40 ~ +85 , 10 ~ 95% RH ENVIRONMENT STORAGE TEMP., HUMIDITY 0.03%/ (0 ~ 50 ) TEMP. COEFFICIENT VIBRATION 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes SAFETY STANDARDS UL60950-1, TUV EN60950-1 approved WITHSTAND VOLTAGE I/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC SAFETY & ISOLATION RESISTANCE I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC/ 500VDC / 25 / 70% RH EMC (Note 4) EMC EMISSION Compliance to EN55022 (CISPR22) Class B, EN61000-3-2,-3 EMC IMMUNITY Compliance to EN61000-4-2,3,4,5,6,8,11 EN55024, heavy industry level, criteria A MTBF 345.3Khrs min. MIL-HDBK-217F (25 ) PCB:175*60*27mm (L*W*H) with optional CASE:195*68.5*33mm (L*W*H) OTHERS DIMENSION PACKING PCB:0.25Kg 48pcs/13Kg/0.85CUFT with optional CASE:0.54Kg 25pcs/14.5Kg/0.59CUFT 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature. NOTE 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12 twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. For guidance on how to perform these EMC tests, please refer to EMI testing of component power supplies. (as available on 4- 3.8 7 4-M3 5 4 10.6 10.6 5 163.8 2- 4 2-M3 185 195 75W Single Output with PFC Function ELP-75 series Mechanical Specification Unit:mm 175 5 165 Optional cover: No. 996A-T 1 2 3 CN1 CN2 4 1 5 2 6 3 FS1 T2.5A/250V LED1 SVR1 AC Input Connector (CN1) : JST B3P-VH or equivalent Pin No. Assignment Mating Housing Terminal 1 AC/L JST VHR JST SVH-21T-P1.1 2 No Pin or equivalent or equivalent 3 AC/N DC Output Connector (CN2) : JST B6P-VH or equivalent Pin No. Assignment Mating Housing Terminal 1,2,3 -V JST VHR JST SVH-21T-P1.1 or equivalent or equivalent 4,5,6 +V Optional L-Bracket: No. 996A-D Block Diagram fosc : 100KHz EMI FILTER RECTIFIERS PFC POWER +V & I/P & CIRCUIT SWITCHING -V RECTIFIER FILTER DETECTION FG CIRCUIT O.L.P. CONTROL O.V.P. Output Derating Output Derating VS Input Voltage Ta=25 230VAC 100 Others 100 90 115VAC 80 80 60 70 3.3V,5V 60 40 50 20 40 (HORIZONTAL) -30 -20 0 10 20 30 40 50 60 70 90 95 100 115 120 140 160 180 200 220 240 264 AMBIENT TEMPERATURE ( ) INPUT VOLTAGE (VAC) 60Hz File Name:ELP-75-SPEC 2011-05-09 4 25 25 68.5 25 25 9 9 60 LOAD (%) 3max. 27 50 5 LOAD (%) 16 33