5 ~ 6W AC-DC Single Output Wall-mounted type G S06U s e ri e s Features : Universal AC input / Full range No load power consumption <0.3W ErP step2 compliant Meet EISA 2007 (Energy Independence and Security Act) 2 pole USA plug Class power (without earth pin) Protections: Short circuit / Overload / Over voltage Pass LPS Fully enclosed plastic case Approvals: UL / CUL / CB / FCC / CE 2 years warranty SPECIFICATION ORDER NO. GS06U-1P1J GS06U-11P1J GS06U-2P1J GS06U-3P1J GS06U-4P1J GS06U-5P1J GS06U-6P1J GS06U-8P1J SAFETY MODEL NO. GPSU06U-1 GPSU06U-1-1 GPSU06U-2 GPSU06U-3 GPSU06U-4 GPSU06U-5 GPSU06U-6 GPSU06U-8 DC VOLTAGE Note.2 5V 7.5V 9V 12V 15V 18V 24V 48V RATED CURRENT 1.00A 0.8A 0.66A 0.5A 0.4A 0.33A 0.25A 0.125A CURRENT RANGE 0 ~ 1.00A 0 ~ 0.8A 0 ~ 0.66A 0 ~ 0.5A 0 ~ 0.4A 0 ~ 0.33A 0 ~ 0.25A 0 ~ 0.125A RATED POWER 5W 6W 6W 6W 6W 6W 6W 6W RIPPLE & NOISE (max.) Note.3 50mVp-p 80mVp-p 80mVp-p 100mVp-p 120mVp-p 150mVp-p 180mVp-p 200mVp-p OUTPUT 5 ~ 6V 6 ~ 8V 8 ~ 11V 11 ~ 13V 13 ~ 16V 16 ~ 21V 21 ~ 27V 33 ~ 48V VOLTAGE ADJ. RANGE Fixed VOLTAGE TOLERANCE Note.4 5.0% 5.0% 5.0% 3.0% 3.0% 3.0% 2.0% 2.0% LINE REGULATION Note.5 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% LOAD REGULATION Note.6 5.0% 5.0% 5.0% 3.0% 3.0% 3.0% 2.0% 2.0% SETUP, RISE, HOLD UP TIME 1000ms, 50ms, 12ms at full load VOLTAGE RANGE 90 ~ 264VAC 127 ~ 370VDC FREQUENCY RANGE 47 ~ 63Hz EFFICIENCY (Typ.) Note.7 68% 74% 75% 77% 78% 78% 82% 84% INPUT AC CURRENT 0.2A / 100VAC INRUSH CURRENT (max.) 50A / 230VAC LEAKAGE CURRENT(max.) 0.25mA / 240VAC >105% rated output voltage power for 5V >110% rated output power for 7.5 ~ 48V OVERLOAD Protection type : Hiccup mode, recovers automatically after fault condition is removed PROTECTION >120% rated output voltage OVER VOLTAGE Protection type : Clamp by zener diode WORKING TEMP. 0 ~ +40 (Refer toDerating Curv) WORKING HUMIDITY 20% ~ 90% RH non-condensing STORAGE TEMP., HUMIDITY -20 ~ +85 , 10 ~ 95% RH ENVIRONMENT TEMP. COEFFICIENT 0.03% / (0 ~ 50 ) VIBRATION 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes SAFETY STANDARDS UL60950-1, CSA22.2 approved WITHSTAND VOLTAGE I/P-O/P:4242VDC SAFETY & ISOLATION RESISTANCE I/P-O/P:100M Ohms / 500VDC / 25 / 70% RH EMC (Note. 8) EMC EMISSION Compliance to EN55022, EN61000-3-2,3, FCC part 15 Class B EMC IMMUNITY Compliance to EN61000-4-2,3,4,5,6,11, light industry level, criteria A MTBF 500Khrs min. MIL-HDBK-217F(25 ) OTHERS DIMENSION 32*66*42.5mm (L*W*H) 100g 110pcs / 12Kg / CARTON PACKING Standard type P1J: 2.1 * 5.5 * 11mm, turning fork type center positive for stock Other type available by customer requested PLUG CONNECTOR CABLE Standard type 20Awg UL1185 6ft for stock Other type available by customer requested NOTE 1.All parameters are specified at 115VAC input, rated load, 25 70% RH ambient. 2.DC voltage: The output voltage set at point measure by plug terminal & 50% load. 3.Ripple & noise are measured at 20MHz by using a 12 twisted pair terminated with a 0.1uf & 47uf capacitor. 4.Tolerance: includes set up tolerance, line regulation, load regulation. 5.Line regulation is measured from low line to high line at rated load. 6.Load regulation is measured from 0% to 100% rated load 7.Efficiency is measured at 115VAC. 8.The power supply is considered as an independent unit, but the final equipment still need to re-confirm that the whole system complies with the EMC directives. File Name:GS06U-SPEC 2011-06-145 ~ 6W AC-DC Single Output Wall-mounted type G S06U s e ri e s Mechanical Specification Unit:mm 12.7 Plug Assignment NAME PLATE Standard plug: P1J 6.3 18.2 P1J P/N OUTPUT 24.2 1.5 CENTER + UL1185 20AWG 1830 50mm 17.1 0.5 48 1 42.5 1 ID 2.1 x OD 5.5 66 1 11 32 1 Derating Curve Static Characteristics 100 100 80 70 60 0 10 20 30 40 50 0 50 60 70 80 90 100 260 Ta ( ) INPUT VOLTAGE File Name:GS06U-SPEC 2011-06-14 LOAD (%) LOAD (%)