22.5~36W AC-DC Single Output Wall-mounted type G S36 E s erie s Features : EUniversal AC input / Full range ENo load power consumption<0.3W EErP step2 compliant EMeet EISA 2007 (Energy Independence and Security Act) E2 pole EURO plug EClass power (without earth pin) EProtections: Short circuit / Overload / Over voltage EFully enclosed plastic case EApprovals: TUV / CB / CE EPass LPS E2 years warranty SPECIFICATION ORDER NO. GS36E05-P1J GS36E09-P1J GS36E12-P1J GS36E24-P1J GS36E48-P1J SAFETY MODEL NO. GS36E05 GS36E09 GS36E12 GS36E24 GS36E48 DC VOLTAGE Note.2 5V 9V 12V 24V 48V RATED CURRENT 4.5A 3.5A 3A 1.5A 0.75A CURRENT RANGE 0 ~ 4.5A 0 ~ 3.5A 0 ~ 3A 0 ~ 1.5A 0 ~ 0.75A RATED POWER (max.) 22.5W 31.5W 36W 36W 36W OUTPUT RIPPLE & NOISE (max.) Note.3 90mVp-p 90mVp-p 100mVp-p 180mVp-p 240mVp-p VOLTAGE TOLERANCE Note.4 5.0% 5.0% 3.0% 2.0% 2.0% LINE REGULATION Note.5 1.0% 1.0% 1.0% 1.0% 1.0% LOAD REGULATION Note.6 5.0% 5.0% 3.0% 2.0% 2.0% SETUP, RISE, HOLD UP TIME 1000ms, 20ms, 15ms/230VAC 1000ms, 20ms, 15ms/115VAC at full load VOLTAGE RANGE 90 ~ 264VAC 135 ~ 370VDC FREQUENCY RANGE 47 ~ 63Hz EFFICIENCY (Typ.) 76.5% 81.5% 84.5% 85.5% 87.5% INPUT AC CURRENT 0.7A / 100VAC INRUSH CURRENT (max.) 60A / 230VAC LEAKAGE CURRENT(max.) 0.25mA / 240VAC 110 ~ 250% rated output power OVERLOAD Protection type : Hiccup mode, recovers automatically after fault condition is removed PROTECTION 105 ~ 135% rated output voltage OVER VOLTAGE Protection type : Clamp by zener diode WORKING TEMP. -20 ~ +50J (Refer toDerating Curv) 20% ~ 90% RH non-condensing WORKING HUMIDITY STORAGE TEMP., HUMIDITY -20 ~ +85J, 10 ~ 95% RH ENVIRONMENT TEMP. COEFFICIENT 0.03% /J (0 ~ 5J0 ) VIBRATION 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes SAFETY STANDARDS TUV EN60950-1 approved WITHSTAND VOLTAGE I/P-O/P:4242VDC SAFETY & I/P-O/P:100M Ohms / 500VDC / 25J/ 70% RH ISOLATION RESISTANCE EMC (Note. 7) EMC EMISSION Compliance to EN55022 class B, EN61000-3-2,3 EMC IMMUNITY Compliance to EN61000-4-2,3,4,5,6,8,11, light industry level, criteria A MTBF 692.3Khrs min. MIL-HDBK-217F(25J) DIMENSION 79*54*33mm (L*W*H) OTHERS 226g 60pcs / 15.5kg / CARTON PACKING PLUG See page2 CONNECTOR CABLE See page2 1.All parameters are specified at 230VAC input, rated load, 25J 70% RH ambient. NOTE 2.DC voltage: The output voltage set at point measure by plug terminal & 50% load. 3.Ripple & noise are measured at 20MHz by using a 12 twisted pair terminated with a 0.1uf & 47uf capacitor. 4.Tolerance: includes set up tolerance, line regulation, load regulation. 5.Line regulation is measured from low line to high line at rated load. 6.Load regulation is measured from 20% to 100% rated load 7.The power supply is considered as an independent unit, but the final equipment still need to re-confirm that the whole system complies with the EMC directives. File Name:GS36E-SPEC 2013-02-2322.5~36W AC-DC Single Output Wall-mounted type G S36 E s erie s Mechanical Specification Unit:mm UL1185 16AWG 1000 50mm 60 10mm 70 10mm 11 0.5mm ID 2.1 x OD 5.5 NAME PLATE Plug Assignment 33 79 Standard plug: P1J P1J P/N OUTPUT CENTER + Derating Curve Static Characteristics for 12~48V 100 100 80 70 for 5~9V 60 -20 10 20 30 40 50 0 50 60 70 80 90 100 264 Ta (J) INPUT VOLTAGE File Name:GS36E-SPEC 2013-02-23 LOAD (%) 54 38 LOAD (%)