200W Single Output with PFC Function HRP-200 series Users Manual 5 - 3 5 ( * 3 :5 :5A B ( CBD E ( : - F 3 3 3 ( 3 ( 3 * ( & C * & Bauartgepruft Sicherheit egelma ge od os be wac g www.tuv.com ID 2000000000 AS/NZS 62368.1 BS EN/EN62368-1 TPTC004 IEC62368-1 SPECIFICATION MODEL HRP-200-3.3 HRP-200-5 HRP-200-7.5 HRP-200-12 HRP-200-15 HRP-200-24 HRP-200-36 HRP-200-48 DC VOLTAGE 3.3V 5V 7.5V 12V 15V 24V 36V 48V RATED CURRENT 40A 35A 26.7A 16.7A 13.4A 8.4A 5.7A 4.3A CURRENT RANGE 0 ~ 40A 0 ~ 35A 0 ~ 26.7A 0 ~ 16.7A 0 ~ 13.4A 0 ~ 8.4A 0 ~ 5.7A 0 ~ 4.3A RATED POWER 132W 175W 200.3W 200.4W 201W 201.6W 205.2W 206.4W RIPPLE & NOISE (max.) Note.2 80mVp-p 90mVp-p 100mVp-p 120mVp-p 150mVp-p 150mVp-p 250mVp-p 250mVp-p OUTPUT VOLTAGE ADJ. RANGE 2.8 ~ 3.8V 4.3 ~ 5.8V 6.8 ~ 9V 10.2 ~ 13.8V 13.5 ~ 18V 21.6 ~ 28.8V 28.8 ~ 39.6V 40.8 ~ 55.2V VOLTAGE TOLERANCE Note.3 2.0% 2.0% 2.0% 1.0% 1.0% 1.0% 1.0% 1.0% LINE REGULATION 0.5% 0.5% 0.5% 0.3% 0.3% 0.2% 0.2% 0.2% LOAD REGULATION 1.5% 1.0% 1.0% 0.5% 0.5% 0.5% 0.5% 0.5% SETUP, RISE TIME 1000ms, 50ms/230VAC 2500ms, 50ms/115VAC at full load HOLD UP TIME (Typ.) 16ms/230VAC 16ms/115VAC at full load VOLTAGE RANGE Note.5 85 ~ 264VAC 120 ~ 370VDC FREQUENCY RANGE 47 ~ 63Hz POWER FACTOR (Typ.) PF>0.95/230VAC PF>0.99/115VAC at full load INPUT EFFICIENCY (Typ.) 80% 84% 86% 88% 88% 88% 89% 89% AC CURRENT (Typ.) 2.1A/115VAC 1.1A/230VAC INRUSH CURRENT (Typ.) 35A/115VAC 70A/230VAC LEAKAGE CURRENT <1.2mA / 240VAC 105 ~ 135% rated output power OVERLOAD Protection type : Constant current limiting, recovers automatically after fault condition is removed 3.96 ~ 4.62V 6 ~ 7V 9.4 ~ 10.9V 14.4 ~ 16.8V 18.8 ~ 21.8V 30 ~ 34.8V 41.4 ~ 48.6V 57.6 ~ 67.2V PROTECTION OVER VOLTAGE Protection type : Shut down o/p voltage, re-power on to recover Shut down o/p voltage, recovers automatically after temperature goes down OVER TEMPERATURE -40 ~ +70 (Refer toDerating Curv) WORKING TEMP. 20 ~ 90% RH non-condensing WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY -40 ~ +85, 10 ~ 95% RH TEMP. COEFFICIENT 0.03%/ (0 ~ 50 VIBRATION 10 ~ 500Hz, 5G 10min./1cycle, 60min. each along X, Y, Z axes UL62368-1,TUV BS EN/EN62368-1, AS/NZS62368.1, EAC TP TC 004 approved SAFETY STANDARDS WITHSTAND VOLTAGE I/P-O/P:3KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC SAFETY & ISOLATION RESISTANCE I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25/ 70% RH EMC (Note 4) EMC EMISSION Compliance to BS EN/EN55032 (CISPR32) Class B, BS EN/EN61000-3-2,-3, EAC TP TC 020 Compliance to BS EN/EN61000-4-2,3,4,5,6,8,11,BS EN/EN55024,heavy industry level, criteria A, EAC TP TC 020 EMC IMMUNITY MTBF 209.4K hrs min. MIL-HDBK-217F (25) OTHERS DIMENSION 199*98*38mm (L*W*H) 0.77Kg 18pcs/14.9Kg/0.87CUFT PACKING NOTE % & ( ) & *& & +, - ( ( + & & & . / 0 ( 4 1 4 & 2 . * / 3 5 ( & / 6/ 7 ( & 8 (as available on 1 5 2 6 3-M3 L=5 3.5 3.5 200W Single Output with PFC Function HRP-200 series Mechanical Specification Case No.902E Unit:mm 197 1 2 3 4 5 6 7 LED CN100 Terminal Pin No. Assignment SVR1 Pin No. Assignment Pin No. Assignment 1 AC/L 4,5 DC OUTPUT -V 57.5 120 4.5 2 AC/N 6,7 DC OUTPUT +V 199 3 FG 6.5 190 Connector Pin No. Assignment (CN100) : HRS DF11-6DP-2DS or equivalent Pin No. Assignment Mating Housing Terminal 1 NC 2 NC 3 NC HRS DF11-6DS HRS DF11-**SC 13max. 4 NC or equivalent or equivalent 28 151 5 +S 6 -S Block Diagram PWM fosc :70KHz +S ACTIVE RECTIFIERS RECTIFIERS EMI +V INRUSH POWER & I/P & FILTER CURRENT SWITCHING -V PFC FILTER LIMITING -S DETECTION O.L.P. O.T.P. CIRCUIT FG O.V.P. PFC PWM CONTROL CONTROL Derating Curve Output Derating VS Input Voltage 100 125 100 90 80 80 70 60 60 40 50 20 40 -40 010203040506070 (HORIZONT(HORIZONTAL)AL) 85 100 125 135 155 264 AMBIENT TEMPERATURE () INPUT VOLTAGE (V) 60Hz File Name:HRP-200-SPEC 2021-09-15 4-M3 L=5 LOAD (%) 8.2 9.5 9 18.5 LOAD(%) 9 80 18 9.5 3.5 3.5 28.5 85.5 7 38 98