LDD-1000LS Mean Well

DC-DC Constant Current Step-Down LED driver LDD-L series 2 % & ( )* + ,- . ( & +/ 0 0)) 1) 2 1) & + 3 , 40 422 3 /& 4 5( 2 ( & -3 ( 6 . & & 5 ( / 5 ( ( ) + ( ( / /, ( SPECIFICATION ORDER NO. LDD-300L LDD-350L LDD-500L LDD-600L LDD-700L CURRENT RANGE 300mA 350mA 500mA 600mA 700mA VOLTAGE RANGE Note.4 2 ~ 32VDC for LDD-300~700L/LW 2~ 28VDC for LDD-300~700LS CURRENT ACCURACY (Typ.) 5% at 24VDC input OUTPUT RIPPLE & NOISE(max.) Note.2 150mVp-p 150mVp-p 150mVp-p 200mVp-p 200mVp-p 40KHz ~ 1000KHz SWITCHING FREQENCY EXTERNAL CAPACITANCE LOAD (max.) 2.2uF VOLTAGE RANGE 9 ~ 36VDC for LDD-300~700L/LW 9~ 32VDC for LDD-300~700LS 95% at full load and 24VDC/36VDC input for LDD-300~700L/LW 95% at full load and 24VDC input for LDD-300~700LS EFFICIENCY (max.) INPUT 350mA 500mA 600mA 700mA Full load Note.3 300mA DC CURRENT No load 5mA Capacitor FILTER Leave open if not use PWM REMOTE ON/OFF Power ON with dimming: DIM ~ -Vin >3.5 ~ 8VDC or open circuit DIMMING Power OFF : DIM ~ -Vin < 0.5VDC or short & PWM FREQUENCY 100 ~ 1KHz ON/OFF CONTROL QUIESCENT INPUT CURRENT 1mA at PWM dimming OFF and 24VDC input IN SHUTDOWN MODE(max.) Regulated at rated output current SHORT CIRCUIT Protection type: Can be continued, recovers automatically after fault condition is removed PROTECTION Tj 150 typically(IC1) detect on main control IC OVER TEMPERATURE Protection type : Shut down, recovers automatically after temperature goes down -40 ~ + 85(Refer to derating curve) WORKING TEMP. WORKING HUMIDITY 20% ~ 90% RH non-condensing for LDD-300~700L/LW 20% ~ 85% RH non-condensing for LDD-300~700LS STORAGE TEMP., HUMIDITY -55 ~ +125, 10 ~ 95% RH ENVIRONMENT TEMP. COEFFICIENT 0.03% / VIBRATION 10 ~ 500Hz, 2G 10min./1 cycle, period for 60min. each along X, Y, Z axes OPERATING CASE TEMP. (max.) 100 SAFETY STANDARDS EAC TP TC 020/2011 approved EMC EMC EMISSION Compliance to BS EN/EN55015, FCC part 15 class B, EAC TP TC 020 EMC IMMUNITY Compliance to BS EN/EN61000-4-2,3,4,6,8, light industry level, criteria A, EAC TP TC 020 MTBF 1000Khrs min. MIL-HDBK-217F (25) DIMENSION 22.6*9.9*8.9mm or 0.89 *0.39 *0.35 inch (L*W*H) for LDD-300~700L/LW 25.4*10.5*9.3mm or 1 *0.4135 *0.366 inch (L*W*H) for LDD-300~700LS OTHERS WEIGHT LDD-300~700L:4g LDD-300~700LW:7.3g LDD-300~700LS :3.4g POTTING MATERIAL Expoxy(UL94-V0) for LDD-300~700L/LW without potted for LDD-300~700LS 17 8 9 : ) * % 5 7 NOTE 7 < ,%6 5( 1 = & 71 7 7> 9 7 974 ( 5( 7 )7>& & 5 & & & 7 3 5 ( 2 . DC-DC Constant Current Step-Down LED driver LDD-L series 2 1 1) % & ( )* + ,- . ( & +/ 0 0)) 1) 2 1) & + 3 , 40 422 3 /& 5( 2 ( & -3 ( 0 . /, ( 84 0 7 1 / : 6 . & & 5 ( / 5 ( ( 1 + ( ( / /, ( SPECIFICATION ORDER NO. LDD-1000L LDD-1200L LDD-1500L CURRENT RANGE 1000mA 1200mA 1500mA VOLTAGE RANGE Note.4 2 ~ 30VDC CURRENT ACCURACY (Typ.) 5% at 24VDC input OUTPUT RIPPLE & NOISE(max.) Note.2 1.5Vp-p 1.5Vp-p 1.5Vp-p SWITCHING FREQENCY 1000KHz EXTERNAL CAPACITANCE LOAD (max.) 2.2uF VOLTAGE RANGE 6 ~ 36VDC 95% at full load and 24VDC/36VDC input for LDD-1000~1500L/LW EFFICIENCY (max.) INPUT 1160mA 1450mA Full load Note.3 990mA DC CURRENT No load 5mA Capacitor FILTER Leave open if not use PWM REMOTE ON/OFF Power ON with dimming: DIM ~ -Vin >2.6 ~ 5.5VDC or open circuit DIMMING Power OFF : DIM ~ -Vin < 0.4VDC or short & PWM FREQUENCY 100 ~ 500Hz ON/OFF CONTROL QUIESCENT INPUT CURRENT 1mA at PWM dimming OFF and 24VDC input IN SHUTDOWN MODE(max.) ANALOG Leave open if not use DIMMING & REMOTE ON / OFF Power ON with dimming : DIM ~ -Vin>0.5~2.5VDC or open circuit ON/OFF Power OFF : DIM ~ -Vin<0.4VDC or short CONTROL Regulated at rated output current SHORT CIRCUIT PROTECTION Protection type: Can be continued, recovers automatically after fault condition is removed WORKING TEMP. -40 ~ + 71(Refer to derating curve) WORKING HUMIDITY 20% ~ 90% RH non-condensing for LDD-1000~1500L/LW 20%~85% RH non-condensing for LDD-1000~1500LS STORAGE TEMP., HUMIDITY -55 ~ +125, 10 ~ 95% RH ENVIRONMENT TEMP. COEFFICIENT 0.03% / VIBRATION 10 ~ 500Hz, 2G 10min./1 cycle, period for 60min. each along X, Y, Z axes 100 OPERATING CASE TEMP. (max.) SAFETY STANDARDS EAC TP TC 020/2011 approved EMC EMC EMISSION Compliance to BS EN/EN55015, FCC part 15 class B, EAC TP TC 020 EMC IMMUNITY Compliance to BS EN/EN61000-4-2,3,4,6,8, light industry level, criteria A, EAC TP TC 020 MTBF 1000Khrs min. MIL-HDBK-217F (25) DIMENSION 31.8*20.3*12.2mm or 1.25 *0.8 *0.48 inch (L*W*H) for LDD-1000~1500L/LW 31.8*20.3*10.9mm or 1.25 *0.8 *0.43 inch (L*W*H) for LDD-1000~1500LS OTHERS WEIGHT LDD-1000~1500L:15.6g LDD-1000~1500LW:18g LDD-1000~1500LS:12.8g POTTING MATERIAL Expoxy(UL94-V0) for LDD-1000~1500L/LW without potted for LDD-1000~1500LS 17 8 9 : ) * % 5 7 NOTE 7 < ,%6 5( 1 = & 71 7 7> 7 974 ( 5( 7 )7>& & 5 & & & 7 3 5 ( 2 .