100W Single Output without PFC Function LPS-100 series % & ()* + SPECIFICATION MODEL LPS-100-3.3 LPS-100-5 LPS-100-7.5 LPS-100-12 LPS-100-13.5 LPS-100-15 LPS-100-24 LPS-100-27 LPS-100-48 DC VOLTAGE 3.3V 5V 7.5V 12V 13.5V 15V 24V 27V 48V RATED CURRENT 20A 20A 13.3A 8.4A 7.5A 6.7A 4.2A 3.8A 2.1A CURRENT RANGE 0 ~ 20A 0 ~ 20A 0 ~ 13.3A 0 ~ 8.4A 0 ~ 7.5A 0 ~ 6.7A 0 ~ 4.2A(6A 10s) 0 ~ 3.8A 0 ~ 2.1A RATED POWER 66W 100W 99.75W 100.8W 101.25W 100.5W 100.8W(144W 10s) 102.6W 100.8W RIPPLE & NOISE (max.) Note.2 150mVp-p 100mVp-p 100mVp-p 100mVp-p 100mVp-p 100mVp-p 150mVp-p 150mVp-p 200mVp-p OUTPUT VOLTAGE ADJ. RANGE 3 ~ 3.6V 4.5 ~ 5.7V 6 ~ 9V 10 ~ 13.2V 12 ~ 15V 13.5 ~ 18V 20 ~ 26.4V 26 ~ 32V 41 ~ 56V VOLTAGE TOLERANCE Note.3 3.0% 3.0% 2.0% 2.0% 2.0% 2.0% 1.0% 1.0% 1.0% LINE REGULATION 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% LOAD REGULATION 2.0% 2.0% 1.5% 1.5% 1.5% 1.5% 0.5% 0.5% 0.5% SETUP, RISE TIME 800ms, 50ms/230VAC 1200ms, 50ms/115VAC at full load HOLD UP TIME (Typ.) 20ms/230VAC 20ms/115VAC at full load VOLTAGE RANGE 88 ~ 132VAC / 176 ~ 264VAC auto switch 248 ~ 370VDC FREQUENCY RANGE 47 ~ 63Hz EFFICIENCY(Typ.) 69% 77% 77% 79% 79% 80% 80% 81% 81% INPUT AC CURRENT (Typ.) 2.3A/115VAC 1.5A/230VAC INRUSH CURRENT (Typ.) COLD START 30A/115VAC 60A/230VAC LEAKAGE CURRENT <1mA / 240VAC 105 ~ 140% (+24V: above 6.5A) rated output power OVERLOAD Protection type : Hiccup mode, recovers automatically after fault condition is removed PROTECTION 3.8 ~ 4.45V 5.75 ~ 6.75V 9.4 ~ 10.9V 13.8 ~ 16.2V 15.5 ~ 18.2V 18 ~ 21V 27.6 ~ 32.4V 33.7 ~ 39.2V 57.6 ~ 67.2V OVER VOLTAGE Protection type : Hiccup mode, recovers automatically after fault condition is removed -10 ~ +60 (Refer toDerating Curv) WORKING TEMP. WORKING HUMIDITY 20 ~ 90% RH non-condensing ENVIRONMENT STORAGE TEMP., HUMIDITY -20 ~ +85, 10 ~ 95% RH TEMP. COEFFICIENT 0.05%/ (0 ~ 50) 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes VIBRATION SAFETY STANDARDS UL60950-1, TUV EN60950-1 approved WITHSTAND VOLTAGE I/P-O/P:3KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC SAFETY & ISOLATION RESISTANCE I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25/ 70% RH EMC (Note 4) Compliance to EN55022 (CISPR22) Class B, EN61000-3-2,-3 EMC EMISSION Compliance to EN61000-4-2,3,4,5,6,11, light industry level, criteria A EMC IMMUNITY MTBF 203.6Khrs min. MIL-HDBK-217F (25) OTHERS DIMENSION 222*62*32mm (L*W*H) 0.45Kg 24pcs/12.5Kg/1.39CUFT PACKING , - . / - - +& 0 1 +2 - - , NOTE +, 3 4 - + 5)* +6 - , 4 7 , &, / 1 , , / - % - , 85 - & & --9 -- - -- : , / % - - - - 85 , - 85 1 <85= - ,> ,- , - 2, = A20 AB01 - 1 / + 0 C + , , 5 5 5+ 85= , File Name:LPS-100-SPEC 2015-08-064-3.5 100W Single Output without PFC Function LPS-100 series Mechanical Specification Unit:mm 222 212 5 FG CN2 8 CN1 7 1 6 2 5 3 4 4 3 5 FS1 2 AC FUSE 1 F4A/250V +V ADJ. AC Input Connector (CN1) : JST B5P-VH or equivalent DC Output Connector (CN2) : JST B8P-VH or equivalent Pin No. Assignment Mating Housing Terminal Pin No. Assignment Mating Housing Terminal 1 FG 1,2,3,4 +V JST VHR JST SVH-21T-P1.1 or equivalent or equivalent 2,4 No pin JST VHR JST SVH-21T-P1.1 5,6,7,8 -V or equivalent or equivalent 3 AC/N : Grounding Required 5 AC/L CN1:Pin 1 is safety ground Block Diagram fosc : 135KHz 115/230VAC RECTIFIERS RECTIFIERS EMI POWER +V & I/P AUTO & SWITCHING FILTER -V FILTER SWITCH FILTER DETECTION CIRCUIT FG PWM O.L.P. CONTROL O.V.P. Derating Curve Static Characteristics (12V) 13 300 18 CFM min 100 Forced Air +12V 12 250 80 11 200 LPS-100-5V 10 150 60 Convection (3.3V,7.5V~48V) 9 100 40 +12V 8 50 20 7 25 -10 0102030405060 (HORIZONTAL) 60 80 100 120 140 160 180 200 220 240 264 AMBIENT TEMPERATURE () INPUT VOLTAGE (V) 60Hz File Name:LPS-100-SPEC 2015-08-06 LOAD (%) 62 3max. 32 52 5 OUTPUT VOLTAGE (V) OUTPUT RIPPLE (mVp-p)