LPS53-I Artesyn Embedded Technologies

Embedded Power for Business-Critical Continuity Rev. 1.08.09 144 LPS50 Series 1 of 3 LPS50 Series 60 Watts Total Power: 55 - 60 Watts Input Voltage: 90 - 264 VAC 127 - 300 VDC of Outputs: Single Electrical Specifications Special Features Input Universal input Input range: 90 - 264 VAC (wide range) 2 x 4 footprint 127 - 300 VDC Less than 1U high Remote sense Frequency: 47-440 Hz Overload and short circuit Inrush current: < 60A peak 230 VAC, cold start 25 C protection Input power: < 74 Watts Adjustable Output Voltage High efficiency Efficiency: 80% - 85% typical at full load High MTBF EMI/RFI: FCC Class B conducted CISPR22 Class B conducted EN55022 Class B Built in EMI filter conducted VDE0878PT3 Class B conducted. (CISPR 22 Class B) Safety ground leakage < 0.5mA 50/60 Hz 264 VAC input for class I < 0.25mA 50/60Hz LED power good indicator current: 264 VAC input for class II Input power < 74 watts Complies with EN61000-3-2 Output UL Class I approved Maximum power: 60 W for convection (LPS52, 55 W) LPS52(-I ) and LPS53 (-I) extended temperature option: Adjustment range: 20% minimum -40 C to +80 C Hold-up time: 10/ 20 ms 115/230 VAC Input line LPX50 enclosure kit available Overload protection: Short circuit protection on all outputs. Case overload protected 110- 160% of normal rating Overvoltage protection: 30-50% above nominal output Remote sense: Compensates for 0.5 V lead drop max. Will operate without remote sense connected. Reverse connection protected. Safety UL UL 60950-1 CSA CSA-C22.2 No. 60950-1 TUV EN60950-1 CB Certificate and report CE LVD & EMCCN1 C2 C3 R22 D4 R3A TH1 C17 R3 L2 F1 LED1 Embedded Power for Business-Critical Continuity Rev. 1.08.09 144 LPS50 Series of 3 Environmental Specifications Operating temperature: 0 to 50 C ambient derate each output as 2.5% per degree from 50 to 70 C. -20 C start up Storage temperature: -40 C to +85 C Electromagnetic susceptibility: Designed to meet EN61000-4 -2, -3, -4, -5, -6, -8, -11 Level 3 Humidity: Operating non-condensing 10% to 95% RH Vibration: IEC68-2-6 to the levels of IEC721-3-2 MTBF demonstrated: > 550,000 hours at full load and 25 C ambient conditions Mechanical Drawing VR1 Output Voltage Adjust Pot M1 M2 C4 TP2 Q5 J4 + GRN/ VR1 DB1 YEL ~ ~ C32 C27 TP1 T1 L3 GND SK2 C30 1 L1 C22 A C5 1 1 B T2 3 E F 6 SK1 T3.15A 2.5A J1 J2 C1 HTSK SEC F2 250VAC C9 G H D Q6 I D2 J3 J 2005 04272000202X-JA 3.73 Mounting Hole 94.7 0.16 4.0 4 Places 4.00 Max. Screw Head 101.6 Diamater .22 (5.6) 0.16 4.0 0.197 (5.0) Minimum Standoff Height C18 R1 C24 2.00 50.8 T3.15A 2.5A 250VAC DIP 1.72 1.30 43.8 33.0 R26