1000W Single Output Medical Type MSP-1000 series < C C D ( ( CD ( ( 1 2 9 < C C D ( ( 3 2 / 24%5 CD ( ( D 9 D<55 8 6 %)7 8 * 5 9 BC : D + 32 + + 3 < 22 ) :8= 3 > 3 < 22 + 5* 8 3 < A5 :< ( 5 % & () * + * ), * - . / / 0 / + . + 0 / / 0 + File Name:MSP-1000-SPEC 2018-09-211000W Single Output Medical Type MSP-1000 series SPECIFICATION MODEL MSP-1000-12 MSP-1000-15 MSP-1000-24 MSP-1000-48 DC VOLTAGE 12V 15V 24V 48V RATED CURRENT 80A 64A 42A 21A CURRENT RANGE 0 ~ 80A 0 ~ 64A 0 ~ 42A 0 ~ 21A RATED POWER 960W (max. 1000W for 3 sec.) 960W (max. 1000W for 3 sec.) 1008W 1008W RIPPLE & NOISE (max.) Note.2 150mVp-p 150mVp-p 200mVp-p 250mVp-p OUTPUT VOLTAGE ADJ. RANGE 11 ~ 14V 14 ~ 17V 22 ~ 28V 46 ~ 56V VOLTAGE TOLERANCE Note.3 2.0% 1.5% 1.0% 1.0% LINE REGULATION 0.5% 0.5% 0.5% 0.5% LOAD REGULATION 2.0% 1.5% 0.5% 0.5% SETUP, RISE TIME 1000ms, 50ms/230VAC 2000ms, 50ms/115VAC at full load HOLD UP TIME (Typ.) 16ms/230VAC 16ms/115VAC at full load VOLTAGE RANGE Note.4 90 ~ 264VAC(300VAC for 5 sec.) 127 ~ 370VDC FREQUENCY RANGE 47 ~ 63Hz POWER FACTOR (Typ.) PF>0.95/230VAC PF>0.98/115VAC at full load INPUT EFFICIENCY (Typ.) 91.5% 92% 93% 94% AC CURRENT (Typ.) 8.5A/115VAC 5A/230VAC INRUSH CURRENT (Typ.) 20A/115VAC 40A/230VAC LEAKAGE CURRENT Earth leakage current < 360A/264VAC , Touch leakage current < 100 A/264VAC 105 ~ 135% rated output power OVERLOAD Protection type : Constant current limiting, recovers automatically after fault condition is removed 14.5 ~ 16.5V 18.2 ~ 20.6V 29 ~ 33V 58 ~ 65V PROTECTION OVER VOLTAGE Protection type : Shut down o/p voltage, re-power on to recover Shut down o/p voltage, recovers automatically after temperature goes down OVER TEMPERATURE CURRENT SHARING Up to 4000W or (3+1) units. Please refer to the Function Manual. REMOTE ON-OFF CONTROL Power ON : short Power OFF : open. Please refer to the Function Manual. REMOTE SENSE Compensate voltage drop on the load wiring up to 0.5V. Please refer to the Function Manual. FUNCTION The TTL signal out, PSU turn on = 3.3 ~ 5.6V PSU turn off = 0 ~ 1V. Please refer to the Function Manual. DC-OK SIGNAL 5VSB : 5V 0.3A tolerance5%, ripple : 50mVp-p(max.) 5V STANDBY Fan on/off by NTC(RT50) or 30% load min. FAN CONTROL WORKING TEMP. -40 ~ +70 (Refer toDerating Curv) 20 ~ 90% RH non-condensing WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY -40 ~ +85, 10 ~ 95% RH non-condensing TEMP. COEFFICIENT 0.03%/ (0 ~ 50) VIBRATION 10 ~ 500Hz, 5G 10min./1cycle, 60min. each along X, Y, Z axes SAFETY STANDARDS ANSI/AAMI ES60601-1, IEC60601-1 CAN/CSA-C22.2 No.60601-1:14-Edition 3 approved ISOLATION LEVEL Primary-Secondary: 2MOPPP, Primary-Earth: 1MO P, Secondary-Earth: 1MOPP WITHSTAND VOLTAGE I/P-O/P:4.5KVAC I/P-FG:2KVAC O/P-FG:1.5KVAC ISOLATION RESISTANCE I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25/ 70% RH Parameter Standard Test Level / Note Conducted EN55032 (CISPR32) / EN55011 (CISPR11) Class B EMC EMISSION Radiated EN55032 (CISPR32) / EN55011 (CISPR11) Class B Harmonic Current EN61000-3-2 Class A Voltage Flicker EN61000-3-3 ----- EN60601-1-2 SAFETY & Parameter Standard Test Level / Note EMC (Note 8) ESD EN61000-4-2 Level 4, 15KV air Level 4, 8KV contact Radiated EN61000-4-3 Level 3 EFT / Burst EN61000-4-4 Level 3 EMC IMMUNITY Surge EN61000-4-5 Level 4, 2KV/Line-Line 4KV/Line-Earth Conducted EN61000-4-6 Level 3 Magnetic Field EN61000-4-8 Level 4 100% dip 1 periods, 30% dip 25 periods, Voltage Dips and Interruptions EN61000-4-11 100% interruptions 250 periods MTBF 286.3K hrs min. Telcordia SR-332 (Bellcore) 105.7K hrs min. MIL-HDBK-217F (25) OTHERS DIMENSION 218*105*63.5mm (L*W*H) PACKING 1.53Kg 8pcs/13.3Kg/1.34CUFT < 8 * / 5 + NOTE B E 6F + + G E )A 8 9 / + - 5 H < 22 < A5 B = E B : < 8/) ) * / 0 + + + . D + 0 + 8( IA - . + D 2 D / JD C K : + 9 + 8 5 5 :(5 File Name:MSP-1000-SPEC 2018-09-21