90W Constant Voltage + Constant Current LED Driver NPF-90 series IP67 & 1 33 : ) 7 () (%8 < (% 3 45 +- =% % - - %& ()& %*& + , - (./ / * 0 12% + 3 45 , - -/ 6 7()& (%& ) & )*& & 4& *)& *2& %*&8 6 9 File Name:NPF-90-SPEC 2016-07-0190W Constant Voltage + Constant Current LED Driver NPF-90 series SPECIFICATION MODEL NPF-90-12 NPF-90-15 NPF-90-20 NPF-90-24 NPF-90-30 NPF-90-36 NPF-90-42 NPF-90-48 NPF-90-54 12V 15V 20V 24V 30V 36V 42V 48V 54V DC VOLTAGE CONSTANT CURRENT REGION Note.2 7.2 ~ 12V 9 ~ 15V 12 ~ 20V 14.4 ~ 24V 18 ~ 30V 21.6 ~ 36V 25.2 ~ 42V 28.8 ~ 48V 32.4 ~ 54V RATED CURRENT 7.5A 6A 4.5A 3.75A 3A 2.5A 2.15A 1.88A 1.67A 90W 90W 90W 90W 90W 90W 90.3W 90.24W 90.18W RATED POWER Note.5 150mVp-p 150mVp-p 150mVp-p 150mVp-p 200mVp-p 200mVp-p 250mVp-p 250mVp-p 350mVp-p RIPPLE & NOISE (max.) Note.3 OUTPUT 4.0% 4.0% 4.0% 3.0% 3.0% 2.0% 1.0% 1.0% 1.0% VOLTAGE TOLERANCE Note.4 LINE REGULATION 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% 1.5% 1.0% 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% LOAD REGULATION SETUP, RISE TIME Note.6 500ms, 80ms 115VAC / 230VAC 16ms/230VAC 16ms/115VAC HOLD UP TIME (Typ.) 90 ~ 305VAC 127 ~ 431VDC VOLTAGE RANGE Note.5 (Please refer toSTATIC CHARACTERISTI section) FREQUENCY RANGE 47 ~ 63Hz PF0.98/115VAC, PF 0.96/230VAC, PF0.94/277VAC full load POWER FACTOR (Please refer toPOWER FACTOR (PF) CHARACTERISTI section) THD< 20%( load60%/115VC,230VAC load 75%/277VAC) TOTAL HARMONIC DISTORTION (Please refer to TOTAL HARMONIC DISTORTION(THD) section) INPUT EFFICIENCY (Typ.) 89% 89.5% 90.5% 91% 89.5% 90.5% 90.5% 90.5% 90.5% AC CURRENT 0.95A / 115VAC 0.5A / 230VAC 0.4A / 277VAC INRUSH CURRENT(Typ.) COLD START 60A(twidth=550 s measured at 50% Ipeak) at 230VAC Per NEMA 410 MAX. No. of PSUs on 16A 3 units (circuit breaker of type B) / 6 units (circuit breaker of type C) at 230VAC CIRCUIT BREAKER LEAKAGE CURRENT <0.25mA / 277VAC NO LOAD POWER CONSUMPTION <0.15W 95 ~ 108% OVER CURRENT Constant current limiting, recovers automatically after fault condition is removed Hiccup mode, recovers automatically after fault condition is removed SHORT CIRCUIT PROTECTION 46 ~ 54V 59 ~ 66V 15 ~ 17V 17.5 ~ 21V 23 ~ 27V 28 ~ 34V 34 ~ 40V 41 ~ 46V 54 ~ 60V OVER VOLTAGE Shut down and latch off o/p voltage, re-power on to recover OVER TEMPERATURE Shut down o/p voltage, re-power on to recover WORKING TEMP. Tcase=-40 ~ +85 (Please refer to OUTPUT LOAD vs TEMPERATURE section) MAX. CASE TEMP. Tcase=+85 20 ~ 95% RH non-condensing WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY -40 ~ +80, 10 ~ 95% RH TEMP. COEFFICIENT 0.03%/ (0 ~ 50) VIBRATION 10 ~ 500Hz, 5G 12min./1cycle, period for 72min. each along X, Y, Z axes UL8750, CSA C22.2 No. 250.13-12, ENEC EN61347-1, EN61347-2-13 independent, EN62384, SAFETY STANDARDS Note.8 IP67 approved Design refer to EN60335-1 WITHSTAND VOLTAGE I/P-O/P:3.75KVAC SAFETY & ISOLATION RESISTANCE I/P-O/P:100M Ohms / 500VDC / 25/ 70% RH EMC EMC EMISSION Note.8 Compliance to EN55015,EN61000-3-2 Class C ( load60%) EN61000-3-3 Compliance to EN61000-4-2,3,4,5,6,8,11 EN61547, light industry level (surge immunity Line-Line 2KV) EMC IMMUNITY MTBF 1011.4K hrs min. Telcordia SR-332 (Bellcore) 292.8Khrs min. MIL-HDBK-217F (25) OTHERS DIMENSION 171*63*37.5mm (L*W*H) 0.77Kg 18pcs/14.9Kg/0.82CUFT PACKING ( >+ - ) & / )% NOTE ) 63&3 +A> 9 > > B 6 C ) AD - () ( C *5 * + E / % - F9+ +3 A 6 + 639+3 G 4 + > > - 5 + H 9 - / H H - 2 + 7 :( %( (*/ :( %( (/ :(55* :(54)% (8 + - - =% / + / - 7 + / 8/ 5% ( - I E File Name:NPF-90-SPEC 2016-07-01