600W Intelligent Single Output Battery Charger PB-600 series * / % & & ( ) * % ) +* +*,- . + / 0 ) & 1 2) ) 2) 34 % 2 2** % % & 5 & Bauart gepruft Sicherheit egelma ge od os be wac g www.tuv.com ID 2000000000 SPECIFICATION MODEL PB-600-12 PB-600-24 PB-600-48 BOOST CHARGE VOLTAGE Vboost 14.4V 28.8V 57.6V FLOAT CHARGE VOLTAGE Vfloat 13.8V 27.6V 55.2V RECOMMENDED BATTERY OUTPUT 135 ~ 400AH 70 ~ 210AH 35 ~ 105AH CAPACITY(AMP HOURS)(Note 4) BATTERY TYPE Open & Sealed Lead Acid OUTPUT CURRENT 40A 21A 10.5A VOLTAGE RANGE 90 ~ 264VAC 127 ~ 370VDC FREQUENCY RANGE 47 ~ 63Hz POWER FACTOR (Typ.) 0.95/230VAC 0.98/115VAC at full load INPUT EFFICIENCY (Typ.) 86% 87% 89% AC CURRENT (Typ.) 6.8A/115VAC 3.4A/230VAC INRUSH CURRENT (Typ.) 25A/115VAC 50A/230VAC LEAKAGE CURRENT <3.5mA / 240VAC 16 ~ 18V 32 ~ 35V 64.5 ~ 69.5V OVER VOLTAGE PROTECTION Protection type : Shut down o/p voltage, re-power on to recover OVER TEMPERATURE Protection type : Shut down o/p voltage, recovers automatically after temperature goes down Open: Normal work Short: Stop Charging REMOTE CONTROL LEAKAGE CURRENT FROM BATTERY (Typ.) 1mA FAST CHARGE 2 / 3 / 8 stage selectable FUNCTION Relay contact (RY15) CHARGER OK OUTPUT OK Relay contact (RY13) TEMPERATURE SENSE By NTC WORKING TEMP. -20 ~ +60 (Refer toDerating Curv) 20 ~ 90% RH non-condensing WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY -40 ~ +85, 10 ~ 95% RH TEMP. COEFFICIENT 0.05%/ (0 ~ 50) VIBRATION 10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes SAFETY STANDARDS UL1012, TUV EN60335-1, EN60335-2-29 (except for 48V), EN60950-1(48V only) approved WITHSTAND VOLTAGE I/P-O/P:3KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC SAFETY & EMC ISOLATION RESISTANCE I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25/ 70% RH (Note 3) EMC EMISSION Compliance to EN55022 class B (CISPR22), EN61000-3-2,-3 EMC IMMUNITY Compliance to EN61000-4-2,3,4,5,6,8,11, EN55024 light industry level, criteria A 135.6K hrs min. MIL-HDBK-217F (25) MTBF 230*158*67mm(L*W*H) OTHERS DIMENSION 2.2Kg 6pcs/14.2Kg/1.76CUFT PACKING & 6 & + & ) 3 73 NOTE 28 & -9 8 5 & 5 5 6 8 6 3 ) : 8 7 + & & < + = 5 5 File Name:PB-600-SPEC 2015-12-15Power Stage 8/3/2 12 34 56 78 9 10 600W Intelligent Single Output Battery Charger PB-600 series Mechanical Specification Case No.805C Unit:mm 230 145 42.5 67 7 ON/OFF SWITCH INLET Air flow 48 direction 24.1 LED Loading Indicator Status Table Status Steady Flashing Color Red Abnormal status Orange Charging Green Full Charging Control Pin No. Assignment(CN100) : HRS DF11-10DP-2DS or equivalent 1 9 7 5 3 Mating Housing HRS DF11-10DS or equivalent 10 8 6 4 2 Terminal HRS DF11-**SC or equivalent CN100 Pin No. Function Description RY13 : Battery Bank OK relay. 1,2 RY13 Relay contact rating(max.) : 30V/1A resistive. Shor when the battery is full,Ope when the battery is still charging. RY15 : Charger OK relay. 5,6 RY15 Relay contact rating(max.) : 30V/1A resistive. Shor when the unit is working properly, Ope when the unit is failure or the protection function is activating. 7 NTC / GND : Temperature sense GND Temperature sensor comes along with the charger can be connected to the unit to allow temperature compensation of the NTC(5K) 8 charging voltage RTH Remote ON/OFF function. 9,10 RC- / RC+ Turn the output on and off by electrical or dry contact between pin 10 (RC+) and pin 9(RC-).Ope : Normal work Shor : Stop charging File Name:PB-600-SPEC 2015-12-15 158 67 33 9 ON OFF AC INPUT