250W Isolated Dual Output with PFC Function PID- 2 5 0 Features : EUniversal AC input / Full range EOptional L-Bracket and cover EIsolated output & GND for CH1,CH2 EBuilt-in active PFC function, PF>0.92 EProtections:Short circuit / Overload / Over voltage / Over temperature ERemote control for CH1 Peak load 170% for CH1 within 10 sec. E ECooling by free air convection E100% full load burn-in test E3 years warranty .. SPECIFICATION MODEL PID-250A PID-250B PID-250C PID-250D OUTPUT NUMBER CH1 CH2 CH1 CH2 CH1 CH2 CH1 CH2 DC VOLTAGE 12V 5V 24V 5V 36V 5V 48V 5V RATED CURRENT 15A(Peak 20A) 5A 9.4A(Peak 16.7A) 5A 6.3A(Peak 11.1A) 5A 4.7A(Peak 8.4A) 5A 0 ~ 15A 0 ~ 5A 0 ~ 9.4A 0 ~ 5A 0 ~ 6.3A 0 ~ 5A 0 ~ 4.7A 0 ~ 5A CURRENT RANGE Note.6 (Peak 20A) (Peak 16.7A) (Peak 11.1A) (Peak 8.4A) RATED POWER 205W 250.6W 251.8W 250.6W RIPPLE & NOISE (max.) Note.2 120mVp-p 50mVp-p 150mVp-p 50mVp-p 200mVp-p 50mVp-p 200mVp-p 50mVp-p OUTPUT VOLTAGE ADJ. RANGE 10.8 ~ 13.2V 4.75 ~ 5.25V 21.6 ~ 26.4V 4.75 ~ 5.25V 32.4 ~ 39.6V 4.75 ~ 5.25V 43.2 ~ 52.8V 4.75 ~ 5.25V VOLTAGE TOLERANCE Note.3 3.0% 2.0% 2.0% 2.0% 2.0% 2.0% 2.0% 2.0% LINE REGULATION 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% LOAD REGULATION 1.0% 2.0% 1.0% 2.0% 1.0% 2.0% 1.0% 2.0% SETUP, RISE TIME 2500ms, 60ms/115VAC 1200ms, 60ms/230VAC HOLD UP TIME (Typ.) 30ms at full load VOLTAGE RANGE Note.5 90 ~ 264VAC 127 ~ 370VDC FREQUENCY RANGE 47 ~ 63Hz POWER FACTOR PF 0.92/230VAC P F 0.97/115VAC at full load INPUT EFFICIENCY(Typ.) 83% 86% 86% 86% 3A/115VAC 1.5A/230VAC AC CURRENT (Typ.) INRUSH CURRENT (Typ.) COLD START 58A/230VAC LEAKAGE CURRENT <3.5mA / 240VAC CH1: 105 ~ 170% rated output power Normally work within 10 sec and then shut down, re-power on to recover Over 180% rated power or short circuit, constant current limiting within 10 sec and then shut down, re-power on to recover OVERLOAD CH2: 101 ~ 150% rated output power Protection type : Hiccup mode, recovers automatically after fault condition is removed PROTECTION 13.8 ~ 16.2V 5.5 ~ 6.75V 27.6 ~ 32.4V 5.5 ~ 6.75V 40 ~ 48V 5.5~ 6.75V 54 ~ 64.8V 5.5 ~ 6.75V Protection type : Shut down o/p voltage, re-power on to recover for CH1 Hiccup mode, recovers automatically afer fault condition OVER VOLTAGE is removed for CH2(by zener diode clamp) 105J J5 detect on heatsink of power transistors OVER TEMPERATURE Protection type : Shut down o/p voltage(CH1), recovers automatically after temperature goes down FUNCTION REMOTE CONTROL CN52 : Open=CH1 & CH2 power on Short = CH1 power off, CH2 power on when CH2 is malfunction, CH1 will be shut down -20 ~ +70J (Refer toDerating Curv) WORKING TEMP. WORKING HUMIDITY 20 ~ 90% RH non-condensing ENVIRONMENT STORAGE TEMP., HUMIDITY -20 ~ +85J, 10 ~ 95% RH TEMP. COEFFICIENT 0.05%J/ (0 ~ 5J)0 VIBRATION 10 ~ 500Hz, 2G 10min./1cycle, period for 60min each along X, Y, Z axes SAFETY STANDARDS UL60950-1, TUV EN60950-1 approved SAFETY & WITHSTAND VOLTAGE I/P-O/P:3KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC ISOLATION RESISTANCE I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25J/ 70% RH EMC (Note 4) Compliance to EN55022 (CISPR22) Class B, EN61000-3-2,-3 EMC EMISSION Compliance to EN61000-4-2,3,4,5,6,8,11, EN61000-6-2, heavy industry level, criteria A EMC IMMUNITY MTBF 150.4K hrs min. MIL-HDBK-217F (25J) OTHERS DIMENSION PCB:222*95*40mm (L*W*H) with optional CASE:250*105.4*53mm (L*W*H) PCB:0.74Kg 18pcs/14.3Kg/0.88CUFT with optional CASE:1.6Kg 9pcs/15.4Kg/0.61CUFT PACKING 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25J of ambient temperature. NOTE 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12 twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. For guidance on how to perform these EMC tests, please refer to EMI testing of component power supplies. (as available on 95 5 85 FAN 250W Isolated Dual Output with PFC Function(Open Frame Type) PID-2 5 0 Mechanical Specification Unit:mm 222 5 212 AC Input Connector (CN1) : JST B5P-VH or equivalent HS1 Pin No. Assignment Mating Housing Terminal CN1 1 FG 1 HS2 18CFM 2 2,4 No Pin JST VHR JST SVH-21T-P1.1 min. 3 4 or equivalent or equivalent 3 AC/N CN51 5 AC FUSE 1 5 AC/L 2 T6.3A/250V 3 SVR1 FS1 4 DC Output Connector (CN51) : JST B10P-VH or equivalent 5 6 Pin No. Assignment Mating Housing Terminal 7 8 15cm 9 1,2,3 COM1 HS3 10 4,5,6 V1 JST VHR JST SVH-21T-P1.1 2 1 or equivalent or equivalent 7,8 COM2 130 SVR2 CN52 9,10 V2 Remote ON/OFF Connector(CN52):JST B2B-XH or equivalent Pin No. Status Mating Housing Terminal PIN1,2 V1: OFF (Short) V2: ON JST XHP JST SXH-001T-P0.6 or equivalent or equivalent PIN1,2 V1: ON (Open) V2: ON SVR1 For CH1 SVR2 For CH2 HS1,HS2,HS3 can not be shorted PFC fosc : 100KHz Block Diagram PWM fosc : 100KHz EMI FILTER RECTIFIERS PFC POWER CH1 & & I/P CIRCUIT GND1 SWITCHING RECTIFIERS FILTER COSTANT CURRENT LIMITING & DETECTION CIRCUIT PWM & PFC FG O.L.P. CONTROL O.V.P. R.C. (CN52) RECTIFIERS POWER CH2 & GND2 SWITCHING FILTER DETECTION CIRCUIT Derating Curve Output Derating VS Input Voltage With 18CFM FAN 100 100 90 80 80 70 60 Convection 50 60 40 50 20 40 -20 -10 0 10 20 30 40 50 60 70 (HORIZONTAL) 90 100 110 115 135 155 230 264 AMBIENT TEMPERATURE (J) INPUT VOLTAGE (V) 60Hz File Name:PID-250-SPEC 2013-03-07 5-r3.5 LOAD (%) 3max. 40 5 LOAD (%)