200W Single Output with PFC Function PPS-200 series .. SPECIFICATION MODEL PPS-200-5 PPS-200-12 PPS-200-15 PPS-200-24 PPS-200-27 PPS-200-48 DC VOLTAGE 5V 12V 15V 24V 27V 48V RATED CURRENT 36A 16.6A 13.3A 8.3A 7.4A 4.167A CURRENT RANGE (convection) 0 ~ 26A 0 ~ 12.5A 0 ~ 10A 0 ~ 6.25A 0 ~ 5.56A 0 ~ 3.13A CURRENT RANGE (20.5CFM FAN) 0 ~ 36A 0 ~ 16.6A 0 ~ 13.3A 0 ~ 8.3A 0 ~ 7.4A 0 ~ 4.167A RATED POWER (convection) 130W 150W 150W 150W 150W 150.24W RATED POWER (20.5CFM FAN) 180W 199.2W 199.5W 199.2W 199.8W 200.016W OUTPUT RIPPLE & NOISE (max.) Note.2 100mVp-p 100mVp-p 100mVp-p 150mVp-p 150mVp-p 250mVp-p VOLTAGE ADJ. RANGE 4.5 ~ 5.5V 10.8 ~ 13.2V 13.5 ~ 16.5V 21.6 ~ 26.4V 24.3 ~ 30V 43.2 ~ 52.8V VOLTAGE TOLERANCE Note.3 4.0% 3.0% 3.0% 2.0% 2.0% 2.0% LINE REGULATION 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% LOAD REGULATION 1.0% 1.0% 1.0% 1.0% 1.0% 1.0% SETUP, RISE TIME 1200ms, 60ms/230VAC 2500ms, 60ms/115VAC at full load HOLD UP TIME (Typ.) 11ms/230VAC/115VAC at full load VOLTAGE RANGE 90 ~ 264VAC 127 ~ 370VDC FREQUENCY RANGE 47 ~ 63Hz POWER FACTOR (Typ.) PF>0.93/230VAC PF>0.98/115VAC at full load EFFICIENCY (Typ.) 86% 89% 89% 89% 89% 90% INPUT AC CURRENT (Typ.) 2.2A/115VAC 1.2A/230VAC INRUSH CURRENT (Typ.) COLD START 70A/230VAC LEAKAGE CURRENT <2mA / 240VAC 105 ~ 135% rated output power OVERLOAD Protection type : Hiccup mode, recovers automatically after fault condition is removed 5.6 ~ 7.25V 13.8 ~ 16.2V 17.25 ~ 20.25V 27.6 ~ 32.4V 31.05 ~ 36.45V 57.6 ~ 67.2V PROTECTION OVER VOLTAGE Protection type : Hiccup mode, recovers automatically after fault condition is removed 110 5(TSW1) detect on heatsink of power transistor OVER TEMPERATURE Protection type : Shut down o/p voltage, recovers automatically after temperature goes down -20 ~ +70 (Refer toDerating Curv) WORKING TEMP. 20 ~ 90% RH non-condensing WORKING HUMIDITY STORAGE TEMP., HUMIDITY -40 ~ +85, 10 ~ 95% RH ENVIRONMENT TEMP. COEFFICIENT 0.05%/ (0 ~ 50) VIBRATION 10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes SAFETY STANDARDS UL60950-1, TUV EN60950-1 approved WITHSTAND VOLTAGE I/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC SAFETY & ISOLATION RESISTANCE I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25/ 70% RH EMC (Note 4) EMC EMISSION Compliance to EN55022 (CISPR22) Class B, EN61000-3-2,-3 EMC IMMUNITY Compliance to EN61000-4-2,3,4,5,6,8,11, EN55024, light industry level, criteria A MTBF 108.4Khrs min. MIL-HDBK-217F (25) OTHERS DIMENSION 127*76.2*35.1mm (L*W*H) 0.37Kg 36pcs/14.3Kg/0.79CUFT PACKING NOTE File Name:PPS-200-SPEC 2014-08-1150mm 4-3.5 200W Single Output with PFC Function PPS-200 series Mechanical Specification Unit:mm 127 5 115.6 1 2 HS2 CN3 SVR1 1 HS1 2 3 4 5 6 7 8 1 CN5 AC Input Connector (CN1) : JST B3P-VH or equivalent 2 3 Pin No. Assignment Mating Housing Terminal LED1 CN1 1 AC/L JST VHR JST SVH-21T-P1.1 2 No Pin or equivalent or equivalent 3 AC/N Air flow DC Output Connector (CN5) : JST B8P-VH or equivalent direction Pin No. Assignment Mating Housing Terminal 20.5CFM 1~4 +V JST VHR JST SVH-21T-P1.1 FAN 5~8 -V or equivalent or equivalent Remote Sense(CN3) : Molex 5045-02 or equivalent Pin No. Assignment Mating Housing Terminal 1 RS- Molex 5051 Molex 4809 or equivalent or equivalent 2 RS+ Block Diagram fosc : 100KHz RECTIFIERS EMI FILTER POWER PFC +V & I/P & CIRCUIT SWITCHING -V RECTIFIERS FILTER DETECTION FG CIRCUIT PWM & PFC O.L.P. CONTROL O.V.P. Derating Curve Output Derating VS Input Voltage 100 125 90 With FAN 100 80 70 70 60 50 Without FAN 50 20 40 -20 0 10 20 30 40 50 60 70 (HORIZONTAL) 90 115 125 135 155 264 AMBIENT TEMPERATURE () INPUT VOLTAGE (V) 60Hz File Name:PPS-200-SPEC 2014-08-11 76.2 LOAD (%) 3max. 35.1 max. 64.8 6.4 LOAD(%)