300W Single Output Green Medical Type RPS-300 series 89 , , 8 , , + - => = 6 + * A : D + : 5 5 + + 3& 1 56 7 : B / C& * 9 C 69 D 0 E A 6+ A 6+ + A 6+ + & & :5 ,&)A * ) F,* 2 * B8G %& ()* + + ,&) (- . / 0 1 . 1 / & 2 3&456 7 85 89 ,,2 / : < 3 7 Blank : PCB type -C : Enclosed type 6 + 6 File Name:RPS-300-SPEC 2016-04-14300W Single Output Green Medical Type RPS-300 series SPECIFICATION MODEL RPS-300-12 RPS-300-15 RPS-300-24 RPS-300-27 RPS-300-48 DC VOLTAGE 12V 15V 24V 27V 48V RATED CURRENT (20.5CFM) 25A 20A 12.5A 11.12A 6.25A CURRENT RANGE (convection) 0 ~ 16.67A 0 ~ 13.33A 0 ~ 8.33A 0 ~ 7.4A 0 ~ 4.17A CURRENT RANGE (20.5CFM) 0 ~ 25A 0 ~ 20A 0 ~ 12.5A 0 ~ 11.12A 0 ~ 6.25A RATED POWER (convection) 200W 200W 199.9W 199.8W 200.2W RATED POWER (20.5CFM) 300W 300W 300W 300.24W 300W OUTPUT RIPPLE & NOISE (max.) Note.2 120mVp-p 120mVp-p 150mVp-p 200mVp-p 250mVp-p VOLTAGE ADJ. RANGE Main output:11.4 ~ 12.6V Main output:14.25 ~ 15.75V Main output:22.8 ~ 25.2V Main output:25.65 ~ 28.35V Main output:45.6 ~ 50.4V VOLTAGE TOLERANCE Note.3 3.0% 3.0% 2.0% 2.0% 2.0% LINE REGULATION 0.5% 0.5% 0.5% 0.5% 0.5% LOAD REGULATION 1.0% 1.0% 1.0% 1.0% 1.0% SETUP, RISE TIME 2500ms, 30ms/230VAC 3000ms, 30ms/115VAC at full load HOLD UP TIME (Typ.) 13ms/230VAC/115VAC at full load VOLTAGE RANGE Note.4 90 ~ 264VAC 127 ~ 370VDC FREQUENCY RANGE 47 ~ 63Hz POWER FACTOR (Typ.) PF>0.93/230VAC PF>0.98/115VAC at full load INPUT EFFICIENCY (Typ.) 90% 90% 92.5% 93% 93% AC CURRENT (Typ.) 3.5A/115VAC 1.8A/230VAC INRUSH CURRENT (Typ.) COLD START 40A/115VAC 80A/230VAC LEAKAGE CURRENT Note.5 Earth leakage current <250uA / 264VAC, Touch current <100uA/264VAC 105 ~ 135% rated output power OVERLOAD Protection type : Hiccup mode, recovers automatically after fault condition is removed 13.5 ~ 15V 16.2 ~ 18.5V 26 ~ 30V 29.5 ~ 33.5V 52 ~ 59.5V PROTECTION OVER VOLTAGE Protection type : Shut down o/p voltage, re-power on to recover Protection type : (TSW1)Shut down o/p voltage, recovers automatically after temperature goes down OVER TEMPERATURE Protection type : (TSW2)Shut down o/p voltage, re-power on to recover 5V STANDBY 5VSB : 5V 0.6A without fan, 1A with fan 20.5CFM tolerance 2%, ripple : 150mVp-p(max.) FAN SUPPLY 12V 0.5A for driving a fan tolerance -15% ~ +10% FUNCTION PS-ON INPUT SIGNAL Power on: PS-ON =H or > 2 ~ 5 Power off: PS-ON =Lo or < 0 ~ 0.5 POWER GOOD / POWER FAIL 500ms>PG>10ms The TTL signal goes high with 10ms to 500ms delay after power set up The TTL signal goes low at least 1ms before Vo below 90% of rated value WORKING TEMP. -30 ~ +70 (Refer toDerating Curv) WORKING HUMIDITY 20 ~ 90% RH non-condensing STORAGE TEMP., HUMIDITY -40 ~ +85 , 10 ~ 95% RH ENVIRONMENT TEMP. COEFFICIENT 0.03%/ (0 ~ 50 ) VIBRATION 10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes SAFETY STANDARDS ANSI/AAMI ES60601-1, TUV EN60601-1, IEC60601-1 approved ISOLATION LEVEL Primary-Secondary: 2xMOPP, Primary-Earth:1xMOPP, Secondary-Earth:1xMOPP SAFETY & WITHSTAND VOLTAGE I/P-O/P:4KVAC I/P-FG:2KVAC O/P-FG:1.5KVAC EMC ISOLATION RESISTANCE I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25/ 70% RH (Note 6) Compliance to EN55011 (CISPR11), EN55022 (CISPR22) ,Conduction Class B ,Radiation Class A EN61000-3-2,-3 EMC EMISSION Compliance to EN61000-4-2,3,4,5,6,8,11, EN55024, EN60601-1-2, criteria A EMC IMMUNITY MTBF 160Khrs min. MIL-HDBK-217F (25 ) PCB type:127*76.2*35mm (L*W*H) Enclosed type:130*86.6*43mm (L*W*H) OTHERS DIMENSION PACKING PCB type:0.37Kg 36pcs/14.3Kg/1.03CUFT Enclosed type:0.563Kg 24pcs/14.5Kg/0.77CUFT * 96. & )* 2 & NOTE H & 5D ,&= , H (I . E 2 G + / + . G . < * 85 1 4 , / . < 85 + : 85 2 85 3 + EAA 7 File Name:RPS-300-SPEC 2016-04-14