AC164159 Microchip

SAMR30 Module XPro SAMR30 Module Xplained Pro User s Guide Introduction The SAMR30 Module Xplained Pro (XPro) evaluation kit is a hardware platform to evaluate the performance of ATSAMR30M18A which is a Sub-1 GHz IEEE 802.15.4 compliant RF module. This evaluation kit is supported by the Atmel Studio Integrated Development Platform (IDP), which provides easy access to various ready-to-use applications supported by the Microchip ATSAMR30M18A module. This users guide facilitates how to get started with the SAMR30 extension board and how to integrate the module in a custom design. The extension board is designed to provide 802.15.4 wireless functionality to the Xplained Pro evaluation platform in 700/800/900 MHz industrial, scientific and medical (ISM) band. Features (1)(4) ATSAMR30M18A module is an IEEE 802.15.4 compliant wireless module for 700/800/900 MHz applications ATSAMR30E18A (ARM Cortex -M0+) System-in-a-Package (SiP) Single-ended RF output through the PCB castellated pad Radio module with a link budget (2)(4) RX sensitivity up to -105 dBm (2)(4) TX output power up to 8.7 dBm High precision 16 MHz crystal oscillator On-board chip antenna for quick evaluation and an SMA connector for conducted measurements and (3) external antenna 2 On-board MCP2221A USB-UART/I C convertor for observing console logs from the SAMR30 On-board AT30TSE758A Digital Temperature Sensor Integrated temperature sensor, non-volatile registers, and serial EEPROM 2 Two wire I C and SMBus compatible serial interface On-board 4 Mb SPI Flash Footprint provision for evaluating CryptoAuthentication device ATECC608A/ATECC508A User Guide DS50002827A-page 1 2018 Microchip Technology Inc. SAMR30 Module XPro Power supply options USB (Default option selected by on-board power multiplexer) Host XPro through extension header Battery header Standalone operation with power supplied through USB header Current measurement header Debug SWD header Digital I/O 2 Xplained Pro extension header comprising SPI, I C, and UART interfaces of the ATSAMR30M18A One RESET button and one user button Two user LEDs One LED for power indication One QTouch button Supports Performance Analyzer example application in Atmel Studio Operating temperature range is from -40C to +85C Xplained Pro hardware identification system Note: 1. The chip antenna supports only the 858-928 MHz band. The rest of the frequency bands supported by the ATSAMR30M18A module can be evaluated through the on-board SMA connector. 2. When f =868.3 MHz, BPSK-20. RF 3. By default, the chip antenna is connected to the RF output of the module. The SMA connector (J106) can be connected to the RF trace by removing L106 and mounting R115. For the schematic, refer to SAMR30 Module XPRO design documentation on the Microchip website: