BR230 Miniature 10 Amps 4PDT To MIL-PRF-83536 SPECIFICATIONS GENERAL Operate/Release Time: DC Coil AC Coil Contact Arrangement ..........................4PDT (4 Form C) 15 ms max 50 ms max Weight..........................................................3.0 oz approx. Excluding bounce time at nominal coil voltage Designed to meet the requirements of MIL-PRF-83536 Contact Bounce Time.......................................1 ms max rated contact load, 28 VDC PERFORMANCE Contact Voltage Drop: Contact Rating (Note 1) Before Life.............................150 mv max 10 Amps Resistive...................................10 Amps 28 VDC or and 6 VDC 115/208V 400 Hz After Life................................175 mv max 10 Amps (Case Grounded) and 6 VDC Inductive ................................8 Amps 28 VDC or ENVIRONMENTAL 115/208V 400 Hz o o Temperature Range...............................-70 C to +125 C (Case Grounded) Vibration (Note 2)..............................0.12 DA 10 - 70 Hz 2.5 Amps 115/208V 60 Hz 30 G s 70 - 3,000 Hz (Case Grounded) Shock (Operating)(Note 2) .........................200 G s 6 ms Motor...........................................4 Amps 28 VDC or 115/208V 400 Hz (Case Grounded) ELECTRICAL CHARACTERISTICS 2 Amps 115/208V 60 Hz Duty Cycle........................................................Continuous (Case Grounded) Insulation Resistance...............................100 megohms Lamp ..........................................2 Amps 28 VDC or o 500V 25 C 115/208V 400 Hz Dielectric Strength: (Case Grounded) Sea Level: 1.5 Amps 115/208V 60 Hz Contact to Case...................................1,250 VRMS (Case Grounded) Contact to Coil .....................................1,250 VRMS Coil to Case .........................................1,000 VRMS Life .....................100,000 operations minimum rated o Across Open Contacts ........................1,250 VRMS resistive load, 125 C 80,000 Feet: Pull In Power ............................................500 mw approx. All Points .................................................350 VRMS MIL-PRF-83536/15 QUALIFIED to ER level M Notes 1. For other ratings consult the factory. 3. AC coil line frequency 50 to 400 Hz. 2. For applications requiring higher shock and vibration, consult the factory. www.microsemi.com April 2015 Rev. 8 1 2015 Microsemi Corporation COIL DATA MODEL BR230 PART NUMBER BR230-20()()-6V BR230-78()()-12V BR230-290()()-28V BR230-890()()-48V BR230AC-()()-115V (Note 3) NOMINAL COIL VOLTAGE 6 VDC 12 VDC 28 VDC 48 VDC 115 VAC MAXIMUM COIL VOLTAGE 8 VDC 15 VDC 29 VDC 59 VDC 122 VAC o PULL IN VOLTAGE (MAX +125 C) 4.5 VDC 9 VDC 18 VDC 36 VDC 90 VAC DROP OUT VOLTAGE (MAX) 1.8 VDC 3.5 VDC 5.1 VDC 11 VDC 5 - 30 VAC o COIL RESISTANCE 10% 25 C 20 OHMS 78 OHMS 290 OHMS 890 OHMS I = 0.04 AMPS --------------------------------------------------------------------------- Relay Type --------------------------------------------------- Nominal coil resistance ---------------------------------------- Terminal style ------------------------------- Mounting Type ------------------ Nominal coil voltage BR230 - 290 C 2 - 28V SCHEMATIC TERMINAL STYLES TERMINAL VIEWS MOUNTING CODES GENERAL NOTES Unless otherwise specified, all tests made a t nominal coil Unless otherwise specified, tolerances on decimal o voltages, 25 C. dimensions are .010 . For special coil variations, switching configurations, Specifications contained herein are subject to change terminals styles and mounting types, consult the factory. without notice. 2