LAN7500/LAN7500i Hi-Speed USB 2.0 to 10/100/1000 Ethernet Controller - Supports checksum offloads (IPv4, IPv6, Highlights TCP, UDP) Single Chip Hi-Speed USB 2.0 to 10/100/1000 - Supports Microsoft NDIS 6.2 large send off- Ethernet Controller load - Supports IEEE 802.1q VLAN tagging 10/100/1000 Ethernet MAC with Full-Duplex Sup- - Ability to add and strip IEEE 802.1q VLAN tags port - VLAN tag based packet filtering (all 4096 VIDs) 10/100/1000 Ethernet PHY with HP Auto-MDIX - Flexible address filtering modes Integrated USB 2.0 Hi-Speed Device Controller - 33 exact matches (unicast or multicast) - 512-bit hash filter for multicast frames Integrated USB 2.0 Hi-Speed PHY - Pass all multicast Implements Reduced Power Operating Modes - Promiscuous unicast/multicast modes Supports EEPROM-less Operation for Reduced - Inverse filtering BOM - Pass all incoming with status report - Wakeup packet support NetDetach provides automatic USB attach/detach - Perfect DA frame, wakeup frame, magic packet, when Ethernet cable is connected/removed broadcast frame, IPv6 & IPv4 TCP SYN - 8 programmable 128-bit wakeup frame filters Target Applications - ARP and NS offload - PME pin support Embedded Systems/CE Devices - Integrated Ethernet PHY Set-Top Boxes/PVRs - Auto-negotiation - Automatic polarity detection and correction Networked Printers - HP Auto-MDIX support USB Port Replicators - Link status change wake-up detection Standalone USB to Ethernet Dongles - Support for 5 status LEDs - Supports various statistical counters Test Instrumentation/Industrial Power and I/Os - Various low power modes Key Benefits - 12 GPIOs - Supports bus-powered and self-powered USB Device Controller operation - Fully compliant with USB Specification Revi- - Variable voltage I/O supply (2.5V/3.3V) sion 2.0 Miscellaneous Features - Supports HS (480 Mbps) and FS (12 Mbps) - EEPROM Controller modes - IEEE 1149.1 (JTAG) Boundary Scan - Four endpoints supported - Requires single 25 MHz crystal - Supports vendor specific commands Software - Integrated USB 2.0 PHY - Windows XP/ Vista / Windows 7 Driver - Remote wakeup supported - Linux Driver - High-Performance 10/100/1000 Ethernet Controller - Win CE Driver - MAC OS Driver - Fully compliant with IEEE802.3/802.3u/ - EEPROM/Manufacturing Utility for Windows/ 802.3ab - Integrated Ethernet MAC and PHY DOS - PXE Support - 10BASE-T, 100BASE-TX, and 1000BASE-T - DOS ODI Driver support Packaging - Full- and half-duplex capability (only full- - 56-pin QFN (8x8 mm), RoHS compliant duplex operation at 1000Mbps) - Full-duplex flow control Environmental - Preamble generation and removal - Commercial Temperature Range (0C to - Automatic 32-bit CRC generation and check- +70C) ing - Industrial Temperature Range (-40C to - 9 KB jumbo frame support +85C) - Automatic payload padding and pad removal - Loop-back modes 2014-2016 Microchip Technology Inc. DS00001734B-page 1LAN7500/LAN7500I TO OUR VALUED CUSTOMERS It is our intention to provide our valued customers with the best documentation possible to ensure successful use of your Microchip products. To this end, we will continue to improve our publications to better suit your needs. Our publications will be refined and enhanced as new volumes and updates are introduced. If you have any questions or comments regarding this publication, please contact the Marketing Communications Department via E-mail at docerrors microchip.com. We welcome your feedback. Most Current Data Sheet To obtain the most up-to-date version of this data sheet, please register at our Worldwide Web site at: