Please note that Cypress is an Infineon Technologies Company. The document following this cover page is marked as Cypress document as this is the company that originally developed the product. Please note that Infineon will continue to offer the product to new and existing customers as part of the Infineon product portfolio. Continuity of document content The fact that Infineon offers the following product as part of the Infineon product portfolio does not lead to any changes to this document. Future revisions will occur when appropriate, and any changes will be set out on the document history page. Continuity of ordering part numbers Infineon continues to support existing part numbers. Please continue to use the ordering part numbers listed in the datasheet for ordering. www.infineon.comCY7C65213 CY7C65213A USB-UART LP Bridge Controller USB-UART LP Bridge Controller Windows Vista: 32- and 64-bit versions Features Windows XP: 32- and 64-bit versions USB 2.0 certified, Full-Speed (12 Mbps) Windows CE Supports communication driver class (CDC), personal health Mac OS-X: 10.6, and later versions care device class (PHDC), and vendor-device class Linux: Kernel version 2.6.35 and later versions Battery charger detection (BCD) compliant with USB Battery Android: Gingerbread and later versions Charging Specification Rev. 1.2 (peripheral detect only) 512-byte flash for storing configuration parameters Integrated USB termination resistors Clocking: Integrated 48-MHz clock oscillator Single-channel configurable UART interfaces USB suspend mode for low power Supports 2-pin, 4-pin, 6-pin, 8-pin UART interface Data rates up to 3 Mbps Supports bus-/self-powered configurations 256 bytes for each transmit and receive buffer Compatible with USB 2.0 and USB 3.0 host controllers Data format: Operating voltage: 1.71 to 5.50 V 7 or 8 data bits 1 or 2 stop bits Operating temperature: No parity, even, odd, mark, or space parity Commercial: 0 C to 70 C Supports parity, overrun, and framing errors Industrial: 40 C to 85 C Supports flow control using CTS, RTS, DTR, DSR ESD protection: 2.2-kV HBM Supports UART break signal RoHS-compliant package CY7C65213 supports single channel RS232/RS422 28-pin SSOP (10 7.5 1.65 mm, 0.65-mm pitch) interfaces whereas CY7C65213A supports RS232/RS422/RS485 interfaces 32-pin QFN (5 5 1 mm, 0.5-mm pitch) General-purpose input/output (GPIO): 8 pins Ordering part number Supports unique serial number feature for each device, which CY7C65213-28PVXI fixes the COM port number permanently when USB-UART LP CY7C65213-32LTXI Bridge controller device plugs in CY7C65213A-28PVXI Configuration utility (Windows) to configure the following: CY7C65213A-32LTXI Vendor ID (VID), Product ID (PID), and Product and Applications Manufacturer descriptors UART Blood glucose meter Charger detection Battery-operated devices GPIO Driver support for VCOM and DLL USB-to-UART cables Windows 10: 32- and 64-bit versions Enables USB connectivity in legacy peripherals with UART Windows 8.1: 32- and 64-bit versions Point-of-Sale (POS) terminals Windows 8: 32- and 64-bit versions Industrial and T&M (Test and Measurement) devices Windows 7: 32- and 64-bit versions USB Compliant The USB-UART LP Bridge controller (CY7C65213 and CY7C65213A) is fully compliant with the USB 2.0 specification, USB-IF Test-ID (TID) 40860041. Table 1. Differences between CY7C65213 and CY7C65213A Features CY7C65213 CY7C65213A RS-485 Support No Yes Cypress Semiconductor Corporation 198 Champion Court San Jose, CA 95134-1709 408-943-2600 Document Number: 001-81011 Rev. *P Revised June 11, 2019