MCP14A0153-E/SN Microchip

MCP14A0153/4/5 1.5A Dual MOSFET Driver with Low Threshold Input and Enable Features General Description High Peak Output Current: 1.5A (typical) The MCP14A0153/4/5 devices are high-speed dual MOSFET drivers that are capable of providing up to Wide Input Supply Voltage Operating Range: 1.5A of peak current while operating from a single 4.5V - 4.5V to 18V to 18V supply. There are three output configurations Low Shoot-Through/Cross-Conduction Current in available: dual inverting (MCP14A0153), dual Output Stage non-inverting (MCP14A0154) and complementary High Capacitive Load Drive Capability: (MCP14A0155). These devices feature low - 1000 pF in 11.5 ns (typical) shoot-through current, matched rise and fall times and short propagation delays, which make them ideal for Short Delay Times: 25 ns (t ), 24 ns (t ) (typical) D1 D2 high switching frequency applications. Low Supply Current: 750 A (typical) The MCP14A0153/4/5 family of devices offers Low-Voltage Threshold Input and Enable with enhanced control with enable functionality. The Hysteresis active-high enable pins can be driven low to drive the Latch-up Protected: Withstands 500 mA Reverse corresponding outputs of the MCP14A0153/4/5 low, Current regardless of the status of the input pin. An integrated Space-Saving Packages: pull-up resistor allows the user to leave the enable pins - 8-Lead MSOP floating for standard operation. - 8-Lead SOIC These devices are highly latch-up resistant under any - 8-Lead 2x3 TDFN condition within their power and voltage ratings. They can accept up to 500 mA of reverse current being Applications forced back into their outputs without damage or logic upset. All terminals are fully protected against Switch-Mode Power Supplies (SMPS) Electrostatic Discharge (ESD), up to 2 kV (HBM) and Pulse Transformer Drive 200 V (MM). Line Drivers Level Translator Motor and Solenoid Drive Package Types MCP14A0153 MCP14A0155 MCP14A0153 MCP14A0155 MCP14A0154 MSOP/SOIC 23 TDFN* MCP14A0154 EN A 1 8 EN B EN A 1 8 EN B IN A 2 7 OUT A OUT A OUT A EP IN A 2 7 OUT A OUT A OUT A 9 V GND 3 6 DD V GND 3 6 DD 4 5 OUT B OUT B OUT B IN B IN B 4 5 OUT B OUT B OUT B * Includes Exposed Thermal Pad (EP) see Table 3-1. 2015-2017 Microchip Technology Inc. DS20005470B-page 1MCP14A0153/4/5 Functional Block Diagram V DD Internal Pull-up Enable V REF Inverting GND Output V DD Input Non-Inverting V REF GND MCP14A0153 Dual Inverting MCP14A0154 Dual Non-Inverting MCP14A0155 One Inverting, One Non-Inverting DS20005470B-page 2 2015-2017 Microchip Technology Inc.