MO-9200A 1-220 MHz High Performance Di eren al Oscillator Applications Features Any frequency between 1 MHz and 220 MHz accurate to 6 decimal places SONET, Synchronous Ethernet, SATA, SAS, 10GB LVPECL and LVDS output signaling types Ethernet, Fibre Channel, PCI-Express 0.6ps RMS phase ji er (random) over 12 kHz to 20 MHz bandwidth Telecom, networking, broadband, instrumenta on Industrial and extended commercial temperature ranges Industry-standard packages: 3.2mm x 2.5mm, 5.0 mm x 3.2 mm and 7.0 mm x 5.0 mm Performance Speci ca ons Parameter and Condi ons Symbol Min. Typ. Max. Unit Condi on LVPECL and LVDS, Common AC Characteris cs Output Frequency Range f 1 220 MHz Frequency Stability F stab -20 +20 PPM Inclusive of Ini al tolerance at 25 C, and varia ons over opera ng temperature, aging, supply voltage and load -50 +50 PPM First Year Aging -2 +2 PPM 25C 10-year Aging -5 +5 PPM 25C Opera ng Temperature Range T use -40 +85 C Industrial -20 +70 C Extended Commercial Start-up Time T start 10 ms Duty Cycle DC 45 55 % Contact Vectron for ghter duty cycle LVPECL, DC and AC Characteris cs Supply Voltage Vdd 2.97 3.3 3.63 V 2.25 2.5 2.75 V Current Consump on Idd 61 69 mA Excluding Load Termina on Current, Vdd = 3.3V or 2.5V OE Disable Supply Current I OE 35 mA OE = Low Output Disable Leakage Current I leak 1 A OE = Low Maximum Output Current I-driver 30 mA Maximum average current drawn from OUT+ or OUT- Output High Voltage VOH Vdd-1.1 Vdd-0.7 V See Figure 1 Output Low Voltage VOL Vdd-1.9 Vdd-1.5 V See Figure 1 Output Di eren al Voltage Swing V Swing 1.2 1.6 2.0 V See Figure 1 Rise/Fall Time Tr, Tf 300 500 ps 20% to 80% OE Enable/Disable Time T oe 115 ns f = 220 MHz - For other frequencies, T oe = 100ns + 3 period RMS Period Ji er T ji 1.2 1.7 ps f = 100 MHz, VDD = 3.3V or 2.5V 1.2 1.7 ps f = 156.25 MHz, VDD = 3.3V or 2.5V 1.2 1.7 ps f = 212.5 MHz, VDD = 3.3V or 2.5V RMS Phase Ji er (random) T phj 0.6 0.85 ps f = 156.25 MHz, Integra on bandwidth = 12 kHz to 20 MHz, all Vdds LVDS, DC and AC Characteris cs Supply Voltage Vdd 2.97 3.3 3.63 V 2.25 2.5 2.75 V Current Consump on Idd 47 55 mA Excluding Load Termina on Current, Vdd = 3.3V or 2.5V OE Disable Supply Current I OE 35 mA OE = Low Output Disable Leakage Current I leak 1 A OE = Low Di eren al Output Voltage VOD 200 350 500 mV See Figure 4 VOD Magnitude Change VOD 50 mV See Figure 4 O set Voltage VOS 1.125 1.2 1.375 V See Figure 4 VOS Magnitude Change VOS 50 mV See Figure 4 Rise/Fall Time Tr, Tf 495 600 ps 20% to 80% OE Enable/Disable Time T oe 115 ns f = 220 MHz - For other frequencies, T oe = 100ns + 3 period RMS Period Ji er T ji 1.2 1.7 ps f = 100 MHz, VDD = 3.3V or 2.5V 1.2 1.7 ps f = 156.25 MHz, VDD = 3.3V or 2.5V 1.2 1.7 ps f = 212.5 MHz, VDD = 3.3V or 2.5V RMS Phase Ji er (random) T phj 0.6 1.0 ps f = 156.25 MHz, Integra on bandwidth = 12 kHz to 20 MHz, all Vdds Page 1 of 6 Rev 1.2 Aug 2014 Vectron Interna onal 267 Lowell Road, Hudson, NH 03051 Tel: 1-88-VECTRON-1 h p://www.vectron.comTypical Phase Noise Page 2 of 6 Rev 1.2 Aug 2014 Vectron Interna onal 267 Lowell Road, Hudson, NH 03051 Tel: 1-88-VECTRON-1 h p://www.vectron.com