SEC1110/SEC1210 Smart Card Bridge to USB and UART Interfaces - Protocol timers (Guard, Timeout, and CWT) General Description for EMV-defined timing parameters The SEC1110 and SEC1210 provide a single-chip Detection of an unresponsive card solution for a Smart Card bridge to USB and UART Activation/deactivation sequences interfaces. These bridges are controlled by an Cold/warm resets Monitoring for all EMV timing constraints enhanced 8051 micro controller and all chip peripher- 16-bit general purpose down counter for software als are accessed and controlled through the SFR or TM timing use XDATA register space. TrustSpan Technology - Fully compliant ESD protection on card pins enables digital systems to securely communicate, pro- USB cess, move and store information on system boards, - 12 Mbps USB operation compliant to the across networks and through the cloud. USB 2.0 Specification - Integrated USB 1.5 K pull-up resistor and Feature Highlights Dp,Dm series termination resistors Smart Card - Integrated USB devices controller with: 8/16/32/64 byte control buffer - The SEC1110 provides one Smart Card inter- Five 8/16/32/64 byte programmable (bulk/ face and the SEC1210 provides two interrupt) endpoint buffers - Fully compliant with ISO/IEC 7816, EMV 4.2/ 8051 Processor 4.3, ETSI TS 102 221 and PC/SC standards - Reduced instruction cycle time (approxi- - Versatile ETU rate generation, supporting mately 9 times 80C51) current and proposed rates (up to 826 Kbps) - 9.6 MHz max clock speed - Full support of both T=0 and T=1 protocols - Enhanced peripherals three 16-bit timers, - Full-packet FIFO (261 bytes), for transmit watchdog timer, interrupt controller, JTAG and receive - OTP (One Time Programmable) - Half-duplex operation (no software interven- ROM : 16 KB RAM : 1.5 KB tion required between transmit and receive Boot ROM : 16 KB UART (SEC1210 only) phases of exchange) Standard PC baud rates supported - Loose real-time response required of soft- 3 M baud high-speed rate (not PC standard) ware (approximately 180 ms) SPI (SEC1210 only) - Dynamically programmable FIFO threshold - Master capability with 12 MHz max perfor- with byte granularity mance - Time-out FIFO flush interrupt, independent of General threshold - 5.0 V tolerance on user accessible IO pins - Programmable Smart Card clock frequency - Self-clocking internal oscillator, no external - UART-like register file structure crystal required - Supports Class A, Class B, Class C, or Class - 3.6 V - 5.5 V supply input AB Smart Cards (1.8 V, 3.0 V and 5.0 V Internal 4.8 V comparator disables Class A card cards) support if the input voltage is too low - Automatic character repetition for T=0 proto- - Available in commercial (0C to +70C) and col parity error recovery industrial (-40C to +85C) temperature - Automatic card deactivation on card removal ranges and on other system events, including per- sistent parity errors Applications - Internal procedure byte filtering for T=0 proto- col USB Smart Card reader UART-based Smart Card reader Dual Smart Card reader 2013 - 2016 Microchip Technology Inc. DS00001561C-page 1SEC1110/SEC1210 TO OUR VALUED CUSTOMERS It is our intention to provide our valued customers with the best documentation possible to ensure successful use of your Microchip products. To this end, we will continue to improve our publications to better suit your needs. Our publications will be refined and enhanced as new volumes and updates are introduced. If you have any questions or comments regarding this publication, please contact the Marketing Communications Department via E-mail at docerrors microchip.com. We welcome your feedback. Most Current Data Sheet To obtain the most up-to-date version of this data sheet, please register at our Worldwide Web site at: