SEC2410/SEC4410 HS Endpoint Processor with USB 2.0, Smart Card, & FMC for Secure Token & Storage PRODUCT FEATURES Datasheet Internal card power FET General Description 200 mA The SMSC SEC2410/SEC4410 are USB 2.0 compliant, Fold-bac short circuit protection hi-speed bulk-only mass storage class peripheral ARM M3 32-bit microprocessor controllers. They are intended to be used to read and 60 MHz execution speed at 1 cycle per instruction write to popular flash media, including Secure Digital (minimum) TM 32 KBytes of internal SRAM for a general purpose (SD), and MultiMediaCard (MMC) families. scratchpad The SMSC SEC2410/SEC4410 are fully integrated, 96 KByte SRAM available for code execution 32 KByte internal code ROM single-chip solutions capable of ultra-high performance JTAG interface operation. Average sustained transfer rates exceeding Supports a single external 3.3 V supply source 35 MB/s are possible if the media and host can support internal regulators provide 1.2 V internal core voltage those rates. The SMSC SEC2410/SEC4410 includes provisions to read/write to secure media formats, as well for additional bill of materials and power savings as support AES encryption, without performance impact. Optimized pinout improves signal routing, easing implementation for improved signal integrity General Features 1.2 V reference voltage for HSIC (SEC4410 only) The SEC2410/SEC4410 is available in two lead-free RoHS compliant packages: Flash Media Specification Compliance 64-pin QFN (9x9 mm) package Secure Digital 2.0 72-pin QFN (10x10 mm) package that includes debug HS-SD, SDHC, SDXC pins to interface to standard ARM debug tools TM TransFlash and reduced form factor media Hardware-controlled data flow architecture for all self- MultiMediaCard mapped media MMC version 4.2: 1/4/8-bit Pipelined hardware support for access to non-self- eMMC version 4.4 mapped media Software Features Order number (see next page) with i denote the Customizable vendor-specific data products that support the industrial temperature range of -40C to 85C Reduced memory footprint Support included for secure media format on a Applications licensed, customized basis Secure dongles and storage SD Secure Flash media card reader/writers Hardware Features Desktop and mobile PCs Single-chip flash media controller containing: Consumer A/V and media players/viewers A multiplexed interface for use with combo card sockets Compatible with SD/MMC flash media reader/writer TM TM Microsoft Vista and Vista ReadyBoost SDIO and MMC streaming mode support Windows 7, XP, ME, 2K SP4 Extended configuration options Apple Mac OSx Media Activity LED Linux Mass Storage Class Drivers GPIO configuration and polarity Up to 32 GPIOs for special function use One GPIO with up to 200 mA drive On board 24 MHz crystal driver circuit Optional external 24 MHz clock input SMSC SEC2410/SEC4410 Revision 1.0 (03-07-13) DATASHEETHS Endpoint Processor with USB 2.0, Smart Card, & FMC for Secure Token & Storage Datasheet Order Numbers: LEAD-FREE ROHS COMPLIANT PACKAGE SIZE TEMPERATURE ORDER NUMBERS PACKAGE (mm) RANGE SEC2410/SEC2410-JZX 0C to 85C 64QFN 9x9 SEC4410/SEC4410i-JZX -40C to 85C 72QFN 10x10 0C to 85C SEC2410/SEC2410-AKZE SEC4410/SEC4410i-AKZE -40C to 85C This product meets the halogen maximum concentration values per IEC61249-2-21. For RoHS compliance and environmental information, please visit www.smsc.com/rohs Copyright 2013 SMSC or its subsidiaries. All rights reserved. Circuit diagrams and other information relating to SMSC products are included as a means of illustrating typical applications. Consequently, complete information sufficient for construction purposes is not necessarily given. Although the information has been checked and is believed to be accurate, no responsibility is assumed for inaccuracies. SMSC reserves the right to make changes to specifications and product descriptions at any time without notice. Contact your local SMSC sales office to obtain the latest specifications before placing your product order. The provision of this information does not convey to the purchaser of the described semiconductor devices any licenses under any patent rights or other intellectual property rights of SMSC or others. All sales are expressly conditional on your agreement to the terms and conditions of the most recently dated version of SMSC s standard Terms of Sale Agreement dated before the date of your order (theTerms of Sale Agreemen). The product may contain design defects or errors known as anomalies which may cause the product s functions to deviate from published specifications. Anomaly sheets are available upon request. SMSC products are not designed, intended, authorized or warranted for use in any life support or other application where product failure could cause or contribute to personal injury or severe property damage. Any and all such uses without prior written approval of an Officer of SMSC and further testing and/or modification will be fully at the risk of the customer. Copies of this document or other SMSC literature, as well as the Terms of Sale Agreement, may be obtained by visiting SMSCs website at