SST25VF032B-80-4I-S2AF Microchip

Obsolete Device Please contact Microchip Sales for replacement information. 32 Mbit SPI Serial Flash SST25VF032B EOL Data Sheet SST 25 series Serial Flash family features a four-wire, SPI-compatible interface that allows for a low pin-count package which occupies less board space and ultimately lowers total system costs. The SST25VF032B devices are enhanced with improved operating frequency which lowers power consumption. SST25VF032B SPI serial flash memories are manufactured with SST s propri- etary, high-performance CMOS SuperFlash technology. The split-gate cell design and thick-oxide tunneling injector attain better reliability and manufactur- ability compared with alternate approaches. Features Single Voltage Read and Write Operations End-of-Write Detection 2.7-3.6V Software polling the BUSY bit in Status Register Busy Status readout on SO pin Serial Interface Architecture Hold Pin (HOLD ) SPI Compatible: Mode 0 and Mode 3 Suspends a serial sequence to the memory High Speed Clock Frequency without deselecting the device Up to 80 MHz Write Protection (WP ) Superior Reliability Enables/Disables the Lock-Down function of the status register Endurance: 100,000 Cycles Greater than 100 years Data Retention Software Write Protection Low Power Consumption: Write protection through Block-Protection bits in status register Active Read Current: 10 mA (typical) Standby Current: 5 A (typical) Temperature Range Flexible Erase Capability Industrial: -40C to +85C Uniform 4 KByte sectors Packages Available Uniform 32 KByte overlay blocks Uniform 64 KByte overlay blocks 8-lead SOIC (200 mils) 8-contact WSON (5 X 6 mm) Fast Erase and Byte-Program: All devices are RoHS compliant Chip-Erase Time: 35 ms (typical) Sector-/Block-Erase Time: 18 ms (typical) Byte-Program Time: 7 s (typical) Auto Address Increment (AAI) Word Programming Decrease total chip programming time over Byte-Pro- gram operations 2015 www.microchip.com DS20005071B 04/1532 Mbit SPI Serial Flash SST25VF032B EOL Data Sheet Product Description The SST 25 series Serial Flash family features a four-wire, SPI-compatible interface that allows for a low pin-count package which occupies less board space and ultimately lowers total system costs. SST25VF032B SPI serial flash memories are manufactured with SSTs proprietary, high-performance CMOS SuperFlash technology. The split-gate cell design and thick-oxide tunneling injector attain bet- ter reliability and manufacturability compared with alternate approaches. The SST25VF032B devices significantly improve performance and reliability, while lowering power consumption. The devices write (Program or Erase) with a single power supply of 2.7-3.6V for SST25VF032B. The total energy consumed is a function of the applied voltage, current, and time of application. Since for any given voltage range, the SuperFlash technology uses less current to pro- gram and has a shorter erase time, the total energy consumed during any Erase or Program operation is less than alternative flash memory technologies. The SST25VF032B device is offered in 8-lead SOIC (200 mils) and 8-contact WSON packages. See Figure 2 for pin assignments. 2015 DS20005071B 04/15 2