SY88927V Micrel, Inc. 5V/3.3V 2.5Gbps SY88927V HIGH-SPEED DIFFERENTIAL RECEIVER FEATURES DESCRIPTION 3.3V and 5V power supply options The SY88927V is a 2.5Gbps high-speed differential receiver. The device is functionally equivalent to the Maximum frequency > 3.0GHz EL16V devices, with higher performance capabilities. With Internal 75K input pull-down resistors output transition times significantly faster than the EL16V, Faster version of SY100EL16V the SY88927V is ideally suited for interfacing with high- 100K ECL compatible I/O frequency sources. The SY88927V provides a V output for either single- Improved output waveform characteristics BB ended use or as a DC bias for AC coupling to the device. Available in 8-pin (3mm) MSOP and SOIC package The V pin should be used only as a bias for the BB SY88927V as its current sink/source capability is limited. Whenever used, the V pin should be bypassed to the BB most positive supply via a 0.01 F capacitor. Under open input conditions (pulled to V ), internal EE input clamps will force the Q output LOW. PIN NAMES Pin Function D Data Inputs Q Data Outputs V Reference Voltage Output BB Rev.: E Amendment: /0 M9999-092305 1 Issue Date: September 2005 hbwhelp micrel.com or (408) 955-1690SY88927V Micrel, Inc. PACKAGE/ORDERING INFORMATION Ordering Information Package Operating Package Lead NC 1 8V CC Part Number Type Range Marking Finish D 2 7 Q SY88927VKC K8-1 Commercial 927V Sn-Pb (1) /D 3 6 /Q SY88927VKCTR K8-1 Commercial 927V Sn-Pb SY88927VZC Z8-1 Commercial 927V Sn-Pb V 4 5 V BB EE (1) SY88927VZCTR Z8-1 Commercial 927V Sn-Pb (2) SY88927VKG K8-1 Industrial 927V with Pb-Free 10-Pin MSOP (K10-1) Pb-Free bar-line indicator NiPdAu (1,2) SY88927VKGTR K8-1 Industrial 927V with Pb-Free Pb-Free bar-line indicator NiPdAu (2) SY88927VZG Z8-1 Industrial 927V with Pb-Free Pb-Free bar-line indicator NiPdAu (1,2) SY88927VZGTR Z8-1 Industrial 927V with Pb-Free Pb-Free bar-line indicator NiPdAu Note: 1. Tape and Reel. 2. NiPdAu Pb-Free package recommended for new designs. M9999-092305 2 hbwhelp micrel.com or (408) 955-1690