USB2005 USB 2.0 ATA/ATAPI Controller with PD-DRM Datasheet PRODUCT FEATURES Provides support for digital rights management for 8051 8 bit microprocessor Provides low speed control functions portable devices (PD-DRM) via Mass Storage Class 30 Mhz execution speed at 4 cycles per instruction SCSI Inquiry command as specified by Microsoft for average Windows Media Systems (WM-DRM). Reports all 768 Bytes of internal SRAM for general purpose media as Removable (HDDs only). scratchpad or program execution while re-flashing 2.5 Volt, Low Power Core Operation external ROM 3.3 Volt I/O with 5V input tolerance Double Buffered Bulk Endpoint Supports a low-cost single 3.3V regulator design, by Bi-directional 512 Byte Buffer for Bulk Endpoint 64 Byte RX Control Endpoint Buffer using a 1N4001 diode to provide the 2.5V core 64 Byte TX Control Endpoint Buffer voltage (from the 3.3V supply) Internal or External Program Memory Interface Complete USB Specification 2.0 Compatibility 48K Byte Internal ROM or optional 64K Byte External Includes USB 2.0 Transceiver Code Space using Flash, SRAM, or EPROM Memory A Bi-directional Control and a Bi-directional Bulk Endpoint are provided. On Board 12Mhz Crystal Driver Circuit Complete System Solution for interfacing ATA or Internal PLL for 480Mhz USB 2.0 Sampling, 30Mhz ATAPI devices to USB 2.0 bus MCU clock, and 60Mhz ATA clock Supports USB Mass Storage Compliant Bootable BIOS Supports firmware upgrade via USB bus ifboot Supports ATA6 Drive capacities up to 2048GB bloc Flash program memory is used for optional True UDMA Mode 4 transfer rates external program memory Support for ATAPI Devices: Optional Serial EEPROM interface for VID/PID/Serial CD-ROM CD-R Number Customization CD-RW 100 Pin, STQFP Lead-free RoHS Compliant Package DVD (12x12x1.4mm body, 14x14mm footprint) DVD/R/W Support for sharing ATA/ATAPI drive with external microprocessor for file playback in portable media player applications Pin indication of USB bus SUSPEND state Control pin to force drive interface high impedance state for drive sharing SMSC USB2005 DATASHEET Revision 0.2 (01-16-07) USB 2.0 ATA/ATAPI Controller with PD-DRM Datasheet ORDER NUMBER: USB2005-MV-01 FOR 100 PIN, STQFP LEAD-FREE ROHS COMPLIANT PACKAGE 80 ARKAY DRIVE, HAUPPAUGE, NY 11788 (631) 435-6000, FAX (631) 273-3123 Copyright 2007 SMSC or its subsidiaries. All rights reserved. Circuit diagrams and other information relating to SMSC products are included as a means of illustrating typical applications. Consequently, complete information sufficient for construction purposes is not necessarily given. Although the information has been checked and is believed to be accurate, no responsibility is assumed for inaccuracies. SMSC reserves the right to make changes to specifications and product descriptions at any time without notice. Contact your local SMSC sales office to obtain the latest specifications before placing your product order. The provision of this information does not convey to the purchaser of the described semiconductor devices any licenses under any patent rights or other intellectual property rights of SMSC or others. All sales are expressly conditional on your agreement to the terms and conditions of the most recently dated version of SMSC s standard Terms of Sale Agreement dated before the date of your order (theTerms of Sale Agreemen). The product may contain design defects or errors known as anomalies which may cause the product s functions to deviate from published specifications. Anomaly sheets are available upon request. SMSC products are not designed, intended, authorized or warranted for use in any life support or other application where product failure could cause or contribute to personal injury or severe property damage. Any and all such uses without prior written approval of an Officer of SMSC and further testing and/or modification will be fully at the risk of the customer. Copies of this document or other SMSC literature, as well as the Terms of Sale Agreement, may be obtained by visiting SMSCs website at