MTFC8GAMALNA-AAT Micron

Micron Confidential and Proprietary 8GB, 16GB, 32GB, 64GB, 128GB: e.MMC (Automotive) Features e.MMC Memory MTFC8GAM, MTFC16GAP, MTFC32GAP, MTFC64GAP, MTFC128GAP Options Marking Features Density MultiMediaCard (MMC) controller and NAND Flash 8GB 8G JEDEC/MMC standard version 5.1-compliant 16GB 16G 1 (JEDEC Standard No. JESD84-B51) 32GB 32G V : 2.73.6V CC 64GB 64G V (dual voltage): 1.701.95V 2.73.6V CCQ 128GB 128G Advanced 12-signal interface NAND component 1, 4, and 8 I/Os, selectable by host 64Gb AM e.MMC I/F boot frequency: 0 to 52 MHz 128Gb AP e.MMC I/F clock frequency: 0 to 200 MHz Controller AL HS200/HS400 mode Packages JEDEC-standard, Command classes: class 0 (basic) class 2 (block RoHS-compliant read) class 4 (block write) class 5 (erase) 100-ball TBGA NA class 6 (write protection) class 7 (lock card) 153-ball TFBGA BH Command queue 153-ball TFBGA NS BKOPS control Operating temperature range Temporary write protection From 40C to +85C AIT Boot operation (high-speed boot) From 40C to +105C AAT Sleep mode Replay-protected memory block (RPMB) 1. The JEDEC specification is available at Note: Hardware reset signal www.jedec.org/sites/default/files/docs/ Multiple partitions with enhanced attribute JESD84-B51.pdf. Permanent and power-on write protection High-priority interrupt (HPI) Data strobe pin Field firmware update (FFU) Device health report Sleep notification Background operation Reliable write Discard and sanitize Power-off notification Backward compatible with previous MMC ECC and block management implemented CCMTD-841846911-10434 Micron Technology, Inc. reserves the right to change products or specifications without notice. 1 auto emmc 8-128gb 5 1.pdf - Rev. G 10/18 EN 2017 Micron Technology, Inc. All rights reserved. Products and specifications discussed herein are subject to change by Micron without notice.Micron Confidential and Proprietary 8GB, 16GB, 32GB, 64GB, 128GB: e.MMC (Automotive) Features Part Numbering Information Micron e.MMC memory devices are available in different configurations and densities. Figure 1: e.MMC Part Numbering MT FC xx xx xx xx - xx xxx xx Micron Technology Production Status Blank = Production Product Family ES = Engineering sample FC = NAND Flash + controller QS = Qualification sample NAND Density Operating Temperature Range NAND Component Special Options Controller ID Package Codes All packages are Pb free Table 1: Ordering Information Base Part Number Density Package Shipping MTFC8GAMALBH-AIT 8GB 153-ball TFBGA Tray MTFC8GAMALBH-AAT 11.5mm 13mm 1.1mm Tape and reel MTFC8GAMALNA-AIT 8GB 100-ball TBGA Tray MTFC8GAMALNA-AAT 14mm 18mm 1.2mm Tape and reel MTFC16GAPALBH-AIT 16GB 153-ball TFBGA Tray MTFC16GAPALBH-AAT 11.5mm 13mm 1.1mm Tape and reel MTFC16GAPALNA-AIT 16GB 100-ball TBGA Tray MTFC16GAPALNA-AAT 14mm 18mm 1.2mm Tape and reel MTFC32GAPALBH-AIT 32GB 153-ball TFBGA Tray MTFC32GAPALBH-AAT 11.5mm 13mm 1.1mm Tape and reel MTFC32GAPALNA-AIT 32GB 100-ball TBGA Tray MTFC32GAPALNA-AAT 14mm 18mm 1.2mm Tape and reel MTFC64GAPALBH-AIT 64GB 153-ball TFBGA Tray MTFC64GAPALBH-AAT 11.5mm 13mm 1.1mm Tape and reel MTFC64GAPALNA-AIT 64GB 100-ball TBGA Tray MTFC64GAPALNA-AAT 14mm 18mm 1.2mm Tape and reel MTFC128GAPALNS-AIT 128GB 153-ball TFBGA Tray MTFC128GAPALNS-AAT 11.5mm 13mm 1.2mm Tape and reel MTFC128GAPALNA-AIT 128GB 100-ball TBGA Tray MTFC128GAPALNA-AAT 14mm 18mm 1.2mm Tape and reel CCMTD-841846911-10434 Micron Technology, Inc. reserves the right to change products or specifications without notice. 2 auto emmc 8-128gb 5 1.pdf - Rev. G 10/18 EN 2017 Micron Technology, Inc. All rights reserved.