+9 to +32 dBm Limiter RLM-521-2WL+ 50 Broadband 0.5 to 520 MHz Features Maximum Ratings wideband, 0.5 to 520 MHz Generic photo used for illustration purposes only Operating Temperature -40C to 85C low insertion loss 0.2 dB typ. CASE STYLE: TT1224 fast recovery time, 3.7 nsec typ. Storage Temperature -55C to 100C excellent VSWR 1.2:1 typ. RF Input Power 2W +RoHS Compliant low output power, 7 dBm typ. The +Suffix identifies RoHS Compliance. See our web site Permanent damage may occur if any of these limits are exceeded. for RoHS Compliance methodologies and qualifications aqueous washable Pin Connections Applications INPUT 1 military, hi-rel applications OUTPUT 4 stabilizing generator outputs reducing amplitude variations GROUND 2,3,5,6 protects low noise amplifiers and other devices from ESD or input power damage Outline Drawing Electrical Specifications PCB Land Pattern Parameter Condition Min. Typ. Max. Units Frequency Range 0.5 520 MHz Linear Range Max Input Power less than 0.1 dB compression -10 dBm Insertion Loss less than -10 dBm input power 0.2 0.7 dB VSWR less than -10 dBm input power 1.2 1.78 :1 Limiting Range Input Power >1dB compression filtered signal frequency +9 +32 dBm Suggested Layout, Output Power +7 dBm Tolerance to be within .002 Input Power Range (dBm) 9 to 20 0.2 Output/ 1dB Input 20 to 25 0.3 dB/dB 25 to 30 0.3 inch 30 to 32 0.3 Outline Dimensions ( ) mm 1 watt pulse 50 sec pw 1kHz duty cycle r ecovery Recovery Time 3.7 nsec A B C D E FG H to within 90% of final value25 .31 .16 .100 .040 .055 .060 .065 Response Time -30 to +30 dBm input 50 sec PW 1 kHz duty cycle 5.8 nsec 6.35 7.87 4.06 2.54 1.02 1.40 1.52 1.65 J K L M N P Q wt300 .060 .160 .025 .100 .110 .070 grams 7.62 1.52 4.06 0.64 2.54 2.79 1.78 0.16 Typical Performance Data Freq. I. Loss (dB) VSWR (:1) Power Output Output / 1dB Input (dBm) (MHz) in Linear in Linear Range Range +9 dBm +20 dBm +25 dBm +30 dBm +32dBm +9 to +20 to +25 to +30 to Demo Board MCL P/N: TB-393 at -10 dBm at -10 dBm Input Input Input Input Input +20 dBm +25 dBm +30 dBm +33 dBm Suggested PCB Layout (PL-258) Input Input Input Input 0.50 0.08 1.15 -0.14 2.93 4.33 6.54 7.67 0.28 0.28 0.44 0.57 0.60 0.07 1.12 -0.11 2.73 4.12 6.05 7.02 0.26 0.28 0.39 0.49 0.70 0.08 1.10 -0.08 2.61 3.97 5.76 6.67 0.24 0.27 0.36 0.46 0.80 0.07 1.07 -0.07 2.53 3.88 5.58 6.47 0.24 0.27 0.34 0.45 0.90 0.06 1.02 -0.06 2.50 3.81 5.46 6.34 0.23 0.26 0.33 0.44 1.00 0.05 1.02 -0.05 2.45 3.80 5.37 6.22 0.23 0.27 0.31 0.43 3.00 0.05 1.02 0.35 2.36 3.66 5.07 5.87 0.18 0.26 0.28 0.40 5.00 0.07 1.04 0.59 2.39 3.70 5.18 5.98 0.16 0.26 0.30 0.40 7.00 0.10 1.07 0.73 2.46 3.79 5.35 6.18 0.16 0.27 0.31 0.42 10.00 0.10 1.08 0.81 2.59 4.02 5.79 6.69 0.16 0.29 0.35 0.45 60.00 0.13 1.12 0.65 2.26 3.54 4.68 5.42 0.19 0.26 0.23 0.37 100.00 0.17 1.17 0.75 2.70 4.16 6.70 7.83 0.14 0.29 0.51 0.57 250.00 0.20 1.22 0.59 2.78 4.23 5.64 6.33 0.18 0.29 0.28 0.35 300.00 0.24 1.27 0.58 2.40 3.66 5.03 5.60 0.15 0.25 0.27 0.29 400.00 0.28 1.33 0.53 2.75 4.06 5.29 5.70 0.22 0.26 0.25 0.21 500.00 0.33 1.39 0.53 2.97 4.31 5.25 5.50 0.19 0.27 0.19 0.13 520.00 0.38 1.45 0.48 2.99 4.25 5.19 5.35 0.22 0.26 0.19 0.08 Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuits applicable established test performance criteria and measurement instructions. REV. A C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, Standard Terms) Purchasers of this part are entitled M151107 to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits website at www.minicircuits.com/MCLStore/terms.jsp ED-14416 RLM-521-2WL+ Mini-Circuits AV/CP/AM 200813 www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 sales minicircuits.com Page 1 of 2RLM-521-2WL+ RLM-521-2WL+ RLM-521-2WL+ INSERTION LOSS IN LINEAR RANGE POWER OUTPUT vs. POWER INPUT 0.80 13.0 0.5 MHz 250 MHz 0.60 520 MHz 8.0 0.40 3.0 0.20 0.00 -2.0 0 104 208 312 416 520 9 11 13 15 17 19 21 23 25 27 29 31 33 FREQUENCY (MHz) POWER INPUT (dBm) RLM-521-2WL+ RLM-521-2WL+ POWER OUTPUT vs. FREQUENCY DELTA OUTPUT/DELTA 1dB INPUT 14.0 0.6 Power Input=+9 dBm 9 to 20 dBm 12.0 Power Input=+20 dBm 0.5 20 to 25 dBm Power Input=+25 dBm 10.0 Power Input=+30 dBm 25 to 30 dBm 0.4 Power Input=+32 dBm 30 to 32 dBm 8.0 0.3 6.0 0.2 4.0 0.1 2.0 0.0 0.0 0 104 208 312 416 520 0 104 208 312 416 520 FREQUENCY (MHz) FREQUENCY (MHz) RLM-521-2WL+ RLM-521-2WL+ INPUT VSWR IN LINEAR RANGE OUTPUT VSWR IN LINEAR RANGE 1.5 1.5 1.4 1.4 1.3 1.3 1.2 1.2 1.1 1.1 1.0 1.0 0 104 208 312 416 520 0 104 208 312 416 520 FREQUENCY (MHz) FREQUENCY (MHz) Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuits applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, Standard Terms) Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 sales minicircuits.com Page 2 of 2 VSWR POWER OUTPUT (dBm) INSERTION LOSS (dB) POWER OUTPUT (dBm) DELTA OUTPUT (dB/dB) VSWR