HN 10 Series HN-510 Built on the heritage of the original FHSS family of modems and combining the advanced features of the HN1010 WIT2410 OEM module, there is a HN 10 Series modem that suits every need, from the relative comfort of an office to the harsh conditions on the factory floor to the unpredictable weather of an outdoor location. HN-1510 Based on 2.4GHz frequency hopping spread spectrum technology, all HN 10 Series modems provide HN2010 extraordinary range while providing immunity to jamming and multipath fading. All backed by extensive experience in wireless technology. All HN 10 Series standalone modems feature a high data rate (460Kbps HN-3010 over the air) and long range (over 5 miles using HN 10 external gain antennas). Both point-to-point and point- to-multi-point network configurations are supported. 2.4 GHz Stand- Alone Modems HN510 HN-1010 HN-1510 HN-2010 HN-3010 HN-510 HN-1010 HN-1510 HN-2010 HN-3010 The HN-510 has the same The HN-1010 is enclosed in The HN-1510 features a The HN-2010 is a dual The HN-3010 is a compact components as its a NEMA 4X and I.P. 66 rated rugged enclosure for indoor wireless modem repeater stand-alone modem with an ruggedized siblings in a housing and can operate industrial applications. The that can be used to create integrated patch antenna. desktop-style enclosure that outdoors from HN-1510 has a standard complex extended range Housed in a NEMA 4X and provides compact size and -30OC to +70OC. The unit DB-9 connector for I/O and networks, either point-to- I.P. 66 enclosure, the HN- weight with a built-in features a 9 pin I/O all data and flow control point or point-to-multi-point. 3010 is a cost-effective, rechargeable battery pack. connector for data, power, lines are RS-232 signals. Half and full duplex I/O rates one-piece, pole-mounted Simply connect to a PCs and flow control. Transmit Power is supplied via a from 1200bps to 230.4Kbps transceiver. The HN-3010 RS-232 port using the 510s and receive data are RS- separate 2-pin connector. are supported. The HN- has an operating DB-9 connector and its 485 compatible differential The HN-1510 also provides 2010 is housed in a NEMA temperature range of -30OC ready to go. Front panel signals while the flow control a 4 LED readout for power 4X and I.P. 66 rated to +70OC. A single 9 pin LEDs give complete power lines are single-ended and status indications. enclosure for outdoor connector provides data, and communications status RS-232. This interface can operation between -30OC flow control, and power. at a glance. drive up to 250 feet of cable and +70OC. A standard Data signals are differential and can be converted to DB-9 data connector is RS-485 compatible, while plain RS-232 using the provided to allow the flow control lines are RS- HopNet 3500 data/power configuration of the 232. adapter. repeater. Because two wireless modems are used back-toback, the full throughput of the data channel is available. Single modem, store and forward repeaters reduce the throughput of the entire system and add latency. www.RFM.com E-mail: info rfm.com Page 1 of 2 2008 by RF Monolithics, Inc. HN 10 - 4/10/08Specifications HN-510 HN1010 HN-1510 HN-2010 HN-3010 Frequency Band 2401 2483 MHz Licensing Unlicensed under FCC Part 15, ETSI 300.328 Number of Channels 75 Hopping Patterns User configurable, 64 patterns (networks) available I/O Data Rate Up to 230.4 Kbps asynchronous RF Channel Rate 460 Kbps Line-of-Sight Range >5 Miles with 9 dB omni antenna RF Bandwidth 750 KHz Modulation Type GFSK Output Impedance 50 ohms Network Protocol ARQ: CSMA/CA or TDMA Transmit Power +18dBm +18 dBm +18 dBm +18 dBm EIRP: +24 dBm Receive Sensitivity -93 dBm -93 dBm -93 dBm -93 dBm -99 dBm Power Requirements 5Vdc 9Vdc 24Vdc 9Vdc 24Vdc 13Vdc 24Vdc 9Vdc 24Vdc 750mA max. 160mA typ. 9 Vdc 160mA typ. 9Vdc 500mA min. 13Vdc 160mA typ. 9Vdc 750mA surge 750mA surge 750mA surge Serial Data Interface Async. RS-232 Async. RS-485/RS-232 Async. RS-232 Async. RS-232 Async. RS-485/RS-232 Mechanical Specifications HN-510 HN-1010 HN-1510 HN-2010 HN-3010 Antenna External External External 2 External Integrated patch Case Materials Plastic Aluminum Aluminum Aluminum UV stabilized polyamide NEMA 4X, IP 66 NEMA 4X, IP 66 NEMA 4X, IP 66 Dimensions(mm) 130 x 95 x 25 213 x 142 x 53 200 x 145 x 51 213 x 145 x 76 175 x 160 x 61 Weight 275g 820g 725g 1590g 570g Antenna Connector Reverse SMA TNC TNC TNC n/a Data Connector DB-9 Conxall model DB-9 DB-9 Conxall model 3282-9SG-528 3282-9SG-528 Power Connector 2-Pin DIN Conxall model In data connector Conxall model In data connector 16282-2SG-311 16282-2SG-311 Environmental Specifications HN-510 HN-1010 HN-1510 HN-2010 HN-3010 Temperature Range 0OC to + 50OC-30OC to + 70OC Humidity 95% at + 40OC, non-condensing www.RFM.com E-mail: info rfm.com Page 2 of 2 2008 by RF Monolithics, Inc. HN 10 - 4/10/08