Strain Meter / Controller Strain Meter / Controller INFCS-B Big Bright LED Display Scaling in Wide Range of Engineering Units Built-In Excitation Analog Output Optional Dual Relays Optional Tare Button Gross/Net Reading or Peak Reading Software Configurable NEWPORT PRODUCT INFO MANUAL - PDF QUICK START - PDF MECHANICAL PRICE REQUIRES ADOBE ACROBAT - HELP NEWPORT INFINITY series feature the biggest brightest display of any 1/8 DIN panel meter. The user can select the display color: RED, AMBER, or GREEN. Panel Meters with Relays and Analog Output The unparalled accuracy of the NEWPORT Electronics INFINITY signal conditioning is available in an economical series of Panel Meter/Controllers. The INFINITY series of meter/controllers feature a four digital display plus optional dual 5 amp Form C relays and a choice of isolated or non-isolated analog output. The scalable 0-10 Vdc, 0- 20mA, or 4-20 mA analog output can be used as a retransmission of the display value or as a proportional control output as required. The microprocessor based INFINITY series includes instruments for Process (DC voltage and current) Strain Gage, Thermocouple, RTD, Dual/Differential Thermocouple, Dual/Differential RTD, pH, ORP. C strain meter/controller accepts a wide variety of DC The INFINITY voltage and current inputs to cover any typical process application. Standard features include easy front panel scaling to virtually any engineering units, selectable excitation of four voltages to work with most transducers and transmitters, front panel and remote tare function for weighing applications, and a hardware lockout to prevent unauthorized changes in setup. C strain meter is ideal for use with pressure transducers, The INFINITY load cells, or any strain gage type transducers. Four full digits and simplified OMEGADYNE Load Cells scaling via the front-panel pushbuttons make it easy to set the display to available from NEWPORT read in any engineering units. CLICK HERE FOR SELECTION GUIDE SPECIFICATIONS Input Ranges: 0-100 mV, 50 mV, 0-10 V, 5 V, 0-20 mA, 4-20 mA Isolation: Dielectric strength to 2500V transient per 3mm spacing based on EN 61010 for 260Vrms or DC working voltage NMR: 60 dBStrain Meter / Controller CMR: 120 dB Input Protection: Voltage Input = 120 Vrms max Current Input = 100 mA max Input Impedance: 100 Meg ohms for 100 mV or 50 mV input range 1 Meg ohm for 10 V or 5 V input range 5 ohms for 20 mA current input range Display: 4-digit, LED 9-segment, 21 mm (0.83 ), (Red, Green, Amber) Analog-to-digital technique: Dual slope Internal resolution: 15 bits Read rate: 3/sec Polarity: Automatic Max error process: 0.03% of reading, 1 count Span tempco: 50 ppm/C Step response: 1 sec Warm-up to rated accuracy: 30 min Load Regulation: 1.1% Line Regulation: 0.02% per Vac Analog output (optional): 0-10 V, 4-20 mA or 0-20 mA may be assigned to a display range or to setpoint 1, when used as a proportional control output Operating temperature: 0 to 50C (32 to 122F) Storage temperature: -40 to 85C (-40 to 184F) Relative humidity: 90% at 40C (104F) (non-condensing) Panel cutout: 1/8 DIN, 45 x 92 mm (1.78 x 3.62 ) Weight: 575 g (1.27 lb) AC Power Unit: Power: 115 Vac or 230 Vac 10% 50-60 Hz, 11.5 watts max. Excitation: 24 V 25 mA or 12 V 50 mA or 10 V 120 mA or 5 V 60 mA DC Power Unit: Power: 10-32 Vdc 7.5 watts max. Excitation: 24 V 25 mA or 12 V, 10 V, 5 V 35 mA (For Low/Medium Brightness) Typical LED Display New Big Bright LED display 13.8 mm (0.54 ) Height Menu selectable color: (Red, Green, Amber) 21 mm (0.83 ) Height Product Selection (Specify Model Number, see variations below in partnumber builder table) Part Number Description Qty. INFCS-000B INFINITY C strain meter, 115 Vac power, basic unit INFCS-001B INFINITY C strain meter, 115 Vac power, non- isolated analog output INFCS-010B INFINITY C strain meter, 115 Vac power, dual