74AHCT573D,112 Nexperia

74AHC573-Q100 74AHCT573-Q100 Octal D-type transparent latch 3-state Rev. 2 13 July 2020 Product data sheet 1. General description The 74AHC573-Q100 74AHCT573-Q100 is an 8-bit D-type transparent latch with 3-state outputs. The device features latch enable (LE) and output enable (OE) inputs. When LE is HIGH, data at the inputs enter the latches. In this condition the latches are transparent, a latch output will change each time its corresponding D-input changes. When LE is LOW the latches store the information that was present at the inputs a set-up time preceding the HIGH-to-LOW transition of LE. A HIGH on OE causes the outputs to assume a high-impedance OFF-state. Operation of the OE input does not affect the state of the latches. Inputs are overvoltage tolerant. This feature allows the use of these devices as translators in mixed voltage environments. This product has been qualified to the Automotive Electronics Council (AEC) standard Q100 (Grade 1) and is suitable for use in automotive applications. 2. Features and benefits Automotive product qualification in accordance with AEC-Q100 (Grade 1) Specified from -40 C to +85 C and from -40 C to +125 C Wide supply voltage range from 2.0 V to 5.5 V Balanced propagation delays All inputs have Schmitt-trigger action Overvoltage tolerant inputs to 5.5 V High noise immunity CMOS low power dissipation Common 3-state output enable input Input levels: For 74AHC573-Q100: CMOS input level For 74AHCT573-Q100: TTL input level ESD protection: MIL-STD-883, method 3015 exceeds 2000 V HBM JESD22-A114F exceeds 2000 V MM JESD22-A115-A exceeds 200 V (C = 200 pf, R = 0 ) Latch-up performance exceeds 100 mA per JESD 78 Class II Level A Multiple package options DHVQFN package with Side-Wettable Flanks enabling Automatic Optical Inspection (AOI) of solder jointsNexperia 74AHC573-Q100 74AHCT573-Q100 Octal D-type transparent latch 3-state 3. Ordering information Table 1. Ordering information Type number Package Temperature range Name Description Version 74AHC573D-Q100 -40 C to +125 C SO20 plastic small outline package 20 leads SOT163-1 body width 7.5 mm 74AHCT573D-Q100 74AHC573PW-Q100 -40 C to +125 C TSSOP20 plastic thin shrink small outline package SOT360-1 20 leads body width 4.4 mm 74AHCT573PW-Q100 74AHC573BQ-Q100 -40 C to +125 C DHVQFN20 plastic dual in-line compatible SOT764-1 thermal enhanced very thin quad 74AHCT573BQ-Q100 flat package no leads 20 terminals body 2.5 4.5 0.85 mm 4. Functional diagram 2 D0 Q0 19 D1 Q1 3 18 4 D2 Q2 17 5 D3 Q3 16 LATCH 3-STATE 6 15 D4 1 to 8 OUTPUTS Q4 7 D5 14 Q5 8 D6 Q6 13 9 D7 12 Q7 LE 11 OE 1 mna809 Fig. 1. Functional diagram 11 C1 1 EN1 1 2 19 1D OE 2 19 D0 Q0 3 18 3 18 D1 Q1 4 17 4 17 D2 Q2 5 16 5 16 D3 Q3 6 15 6 15 D4 Q4 7 14 7 14 D5 Q5 8 13 D6 Q6 8 13 9 12 D7 Q7 9 12 LE mna807 11 mna808 Fig. 2. Logic symbol Fig. 3. IEC logic symbol 74AHC AHCT573 Q100 All information provided in this document is subject to legal disclaimers. Nexperia B.V. 2020. All rights reserved Product data sheet Rev. 2 13 July 2020 2 / 16