74ALVC125BQ,115 Nexperia

Important notice Dear Customer, On 7 February 2017 the former NXP Standard Product business became a new company with the tradename Nexperia. Nexperia is an industry leading supplier of Discrete, Logic and PowerMOS semiconductors with its focus on the automotive, industrial, computing, consumer and wearable application markets In data sheets and application notes which still contain NXP or Philips Semiconductors references, use the references to Nexperia, as shown below. Instead of 74ALVC125 Quad buffer/line driver; 3-state Rev. 02 10 January 2008 Product data sheet 1. General description The 74ALVC125 is a quad non-inverting buffer/line driver with 3-state outputs. The 3-state outputs (nY) are controlled by the output enable input (nOE). A HIGH on the nOE pin causes the outputs to assume a high-impedance OFF-state. 2. Features Wide supply voltage range from 1.65 V to 3.6 V 3.6 V tolerant inputs/outputs CMOS low power consumption Direct interface with TTL levels (2.7 V to 3.6 V) Power-down mode Latch-up performance exceeds 250 mA Complies with JEDEC standards: JESD8-7 (1.65 V to 1.95 V) JESD8-5 (2.3 V to 2.7 V) JESD8B/JESD36 (2.7 V to 3.6 V) ESD protection: HBM JESD22-A114E exceeds 2000 V MM JESD22-A 115-A exceeds 200 V 3. Ordering information Table 1. Ordering information Type number Package Temperature range Name Description Version 74ALVC125D - 40 Cto+85 C SO14 plastic small outline package; 14 leads; SOT108-1 body width 3.9 mm 74ALVC125PW - 40 Cto+85 C TSSOP14 plastic thin shrink small outline package; 14 leads; SOT402-1 body width 4.4 mm 74ALVC125BQ - 40 Cto+85 C DHVQFN14 plastic dual in-line compatible thermal enhanced very SOT762-1 thin quad at package; no leads; 14 terminals; body 2.5 3 0.85 mm