74AUP2G126GS,115 Nexperia

74AUP2G126 Low-power dual buffer/line driver 3-state Rev. 11 3 July 2017 Product data sheet 1 General description The 74AUP2G126 provides the dual non-inverting buffer/line driver with 3-state output. The 3-state output is controlled by the output enable input (nOE). A LOW level at pin nOE causes the output to assume a high-impedance OFF-state. This device has the input-disable feature, which allows floating input signals. The inputs are disabled when the output enable input nOE is LOW. Schmitt trigger action at all inputs makes the circuit tolerant to slower input rise and fall times across the entire V range from 0.8 V to 3.6 V. This device ensures a very low CC static and dynamic power consumption across the entire V range from 0.8 V to 3.6 V. CC This device is fully specified for partial power-down applications using I . The I OFF OFF circuitry disables the output, preventing a damaging backflow current through the device when it is powered down. 2 Features and benefits Wide supply voltage range from 0.8 V to 3.6 V High noise immunity Complies with JEDEC standards: JESD8-12 (0.8 V to 1.3 V) JESD8-11 (0.9 V to 1.65 V) JESD8-7 (1.2 V to 1.95 V) JESD8-5 (1.8 V to 2.7 V) JESD8-B (2.7 V to 3.6 V) ESD protection: HBM JESD22-A114F Class 3A exceeds 5000 V MM JESD22-A115-A exceeds 200 V CDM JESD22-C101E exceeds 1000 V Low static power consumption I = 0.9 A (maximum) CC Latch-up performance exceeds 100 mA per JESD78 Class II Inputs accept voltages up to 3.6 V Low noise overshoot and undershoot < 10 % of V CC Input-disable feature allows floating input conditions I circuitry provides partial Power-down mode operation OFF Multiple package options Specified from -40 C to +85 C and -40 C to +125 CNexperia 74AUP2G126 Low-power dual buffer/line driver 3-state 3 Ordering information Table 1.Ordering information Type number Package Temperature Name Description Version range 74AUP2G126DC -40 C to +125 C VSSOP8 plastic very thin shrink small outline package 8 leads SOT765-1 body width 2.3 mm 74AUP2G126GT -40 C to +125 C XSON8 plastic extremely thin small outline package no leads SOT833-1 8 terminals body 1 x 1.95 x 0.5 mm 74AUP2G126GF -40 C to +125 C XSON8 extremely thin small outline package no leads SOT1089 8 terminals body 1.35 x 1 x 0.5 mm 74AUP2G126GM -40 C to +125 C XQFN8 plastic, extremely thin quad flat package no leads SOT902-2 8 terminals body 1.6 x 1.6 x 0.5 mm 74AUP2G126GN -40 C to +125 C XSON8 extremely thin small outline package no leads SOT1116 8 terminals body 1.2 x 1.0 x 0.35 mm 74AUP2G126GS -40 C to +125 C XSON8 extremely thin small outline package no leads SOT1203 8 terminals body 1.35 x 1.0 x 0.35 mm 74AUP2G126GX -40 C to +125 C X2SON8 plastic thermal enhanced extremely thin small outline SOT1233 package no leads 8 terminals body 1.35 x 0.8 x 0.35 mm 4 Marking Table 2.Marking codes 1 Type number Marking code 74AUP2G126DC p26 74AUP2G126GT p26 74AUP2G126GF pN 74AUP2G126GM p26 74AUP2G126GN pN 74AUP2G126GS pN 74AUP2G126GX pN 1 The pin 1 indicator is located on the lower left corner of the device, below the marking code. 74AUP2G126 All information provided in this document is subject to legal disclaimers. Nexperia B.V. 2017. All rights reserved. Product data sheet Rev. 11 3 July 2017 2 / 26