74AVC1T45GXZ Nexperia

74AVC1T45 Dual-supply voltage level translator/transceiver 3-state Rev. 6 20 April 2016 Product data sheet 1. General description The 74AVC1T45 is a single bit, dual supply transceiver with 3-state output that enables bidirectional level translation. It features two 1-bit input-output ports (A and B), a direction control input (DIR) and dual supply pins (V and V ). Both V and V can CC(A) CC(B) CC(A) CC(B) be supplied at any voltage between 0.8 V and 3.6 V making the device suitable for translating between any of the low voltage nodes (0.8 V, 1.2 V, 1.5 V, 1.8 V, 2.5 V and 3.3 V). Pins A and DIR are referenced to V and pin B is referenced to V . A HIGH CC(A) CC(B) on DIR allows transmission from A to B and a LOW on DIR allows transmission from B to A. The device is fully specified for partial power-down applications using I . The I OFF OFF circuitry disables the output, preventing any damaging backflow current through the device when it is powered down. In suspend mode when either V or V are at CC(A) CC(B) GND level, both A and B are in the high-impedance OFF-state. 2. Features and benefits Wide supply voltage range: V : 0.8 V to 3.6 V CC(A) V : 0.8 V to 3.6 V CC(B) High noise immunity Complies with JEDEC standards: JESD8-12 (0.8 V to 1.3 V) JESD8-11 (0.9 V to 1.65 V) JESD8-7 (1.2 V to 1.95 V) JESD8-5 (1.8 V to 2.7 V) JESD8-B (2.7 V to 3.6 V) ESD protection: HBM JESD22-A114E Class 3B exceeds 8000 V MM JESD22-A115-A exceeds 200 V CDM JESD22-C101C exceeds 1000 V Maximum data rates: 500 Mbit/s (1.8 V to 3.3 V translation) 320 Mbit/s (< 1.8 V to 3.3 V translation) 320 Mbit/s (translate to 2.5 V or 1.8 V) 280 Mbit/s (translate to 1.5 V) 240 Mbit/s (translate to 1.2 V) Suspend mode Latch-up performance exceeds 100 mA per JESD 78 Class II74AVC1T45 Nexperia Dual-supply voltage level translator/transceiver 3-state Inputs accept voltages up to 3.6 V Low noise overshoot and undershoot < 10 % of V CC I circuitry provides partial Power-down mode operation OFF Multiple package options Specified from 40 Cto+85 C and 40 Cto+125 C 3. Ordering information Table 1. Ordering information Type number Package Temperature range Name Description Version 74AVC1T45GW 40 Cto +125 C SC-88 plastic surface-mounted package 6 leads SOT363 74AVC1T45GM 40 Cto +125 C XSON6 plastic extremely thin small outline package no leads SOT886 6 terminals body 1 1.45 0.5 mm 74AVC1T45GN 40 C to +125 C XSON6 extremely thin small outline package no leads SOT1115 6 terminals body 0.9 1.0 0.35 mm 74AVC1T45GS 40 C to +125 C XSON6 extremely thin small outline package no leads SOT1202 6 terminals body 1.0 1.0 0.35 mm 74AVC1T45GX 40 C to +125 C X2SON6 plastic thermal extremely thin small outline package SOT1255 no leads 6 terminals body 1 0.8 0.35 mm 4. Marking Table 2. Marking 1 Type number Marking code 74AVC1T45GW B5 74AVC1T45GM B5 74AVC1T45GN B5 74AVC1T45GS B5 74AVC1T45GX B5 1 The pin 1 indicator is located on the lower left corner of the device, below the marking code. 74AVC1T45 All information provided in this document is subject to legal disclaimers. Nexperia B.V. 2017. All rights reserved Product data sheet Rev. 6 20 April 2016 2 of 25