74AXP2T3407GSX Nexperia

74AXP2T3407 Dual supply single buffer and single buffer with open-drain Rev. 2 7 October 2016 Product data sheet 1. General description The 74AXP2T3407 is a dual supply single buffer and a single buffer with open-drain output. It features two input pins (nA), an output pin (1Y) and an open-drain output pin (2Y) and dual supply pins (V and V ). The inputs are referenced to V and the CCI CCO CCI output is referenced to V . All inputs can be connected directly to V or GND. V CCO CCI CCI can be supplied at any voltage between 0.7 V and 2.75 V and V can be supplied at CCO any voltage between 1.2 V and 5.5 V. This feature allows voltage level translation. Schmitt-trigger action at all inputs makes the circuit tolerant of slower input rise and fall times. This device ensures very low static and dynamic power consumption across the entire supply range and is fully specified for partial power down applications using I . The I OFF OFF circuitry disables the output, preventing the potentially damaging backflow current through the device when it is powered down. 2. Features and benefits Wide supply voltage range: V : 0.7 V to 2.75 V CCI V : 1.2 V to 5.5 V CCO Low input capacitance C = 0.6 pF (typical) I Low output capacitance C = 1.8 pF (typical) for 1Y O Low output capacitance C = 1.3 pF (typical) for 2Y O Low dynamic power consumption C = 0.4 pF at V = 1.2 V (typical) PD CCI Low dynamic power consumption C = 7.1 pF at V = 3.3 V (typical) PD CCO Low static power consumption I = 0.5 A (85 C maximum) CCI Low static power consumption I = 1.8 A (85 C maximum) CCO High noise immunity Complies with JEDEC standard: JESD8-12A.01 (1.1 V to 1.3 V nA inputs) JESD8-11A.01 (1.4 V to 1.6 V) JESD8-7A (1.65 V to 1.95 V) JESD8-5A.01 (2.3 V to 2.7 V) JESD8-C (2.7 V to 3.6 V nY outputs) JESD12-6 (4.5 V to 5.5 V nY outputs) ESD protection: HBM ANSI/ESDA/JEDEC JS-001 Class 2 exceeds 2 kV CDM JESD22-C101E exceeds 1000 V74AXP2T3407 Nexperia Dual supply single buffer and single buffer with open-drain Latch-up performance exceeds 100 mA per JESD78D Class II Inputs accept voltages up to 2.75 V Low noise overshoot and undershoot < 10% of V CCO I circuitry provides partial power-down mode operation OFF Multiple package options Specified from 40 Cto+85 C 3. Ordering information Table 1. Ordering information Type number Package Temperature range Name Description Version 74AXP2T3407DC 40 Cto +85 C VSSOP8 plastic very thin shrink small outline package 8 leads SOT765-1 body width 2.3 mm 74AXP2T3407GT 40 Cto +85 C XSON8 plastic extremely thin small outline package no leads SOT833-1 8 terminals body 1 1.95 0.5 mm 74AXP2T3407GN 40 Cto +85 C XSON8 extremely thin small outline package no leads SOT1116 8 terminals body 1.2 1.0 0.35 mm 74AXP2T3407GS 40 Cto +85 C XSON8 extremely thin small outline package no leads SOT1203 8 terminals body 1.35 1.0 0.35 mm 4. Marking Table 2. Marking 1 Type number Marking code 74AXP2T3407DC r4 74AXP2T3407GT r4 74AXP2T3407GN r4 74AXP2T3407GS r4 1 The pin 1 indicator is located on the lower left corner of the device, below the marking code. 74AXP2T3407 All information provided in this document is subject to legal disclaimers. Nexperia B.V. 2017. All rights reserved Product data sheet Rev. 2 7 October 2016 2 of 22