74CBTLV3257D,118 Nexperia

74CBTLV3257-Q100 Quad 1-of-2 multiplexer/demultiplexer Rev. 4 14 July 2020 Product data sheet 1. General description The 74CBTLV3257-Q100 provides a quad 1-of-2 high-speed multiplexer/demultiplexer with common select (S) and output enable (OE) inputs. The low ON resistance of the switch allows inputs to be connected to outputs without adding propagation delay or generating additional ground bounce noise. When pin OE = LOW, one of the two switches is selected (low-impedance ON-state) with pin S. When pin OE = HIGH, all switches are in the high-impedance OFF-state, independent of pin S. To ensure the high-impedance OFF-state during power-up or power-down, OE should be tied to the V through a pull-up resistor. The current-sinking capability of the driver determines the CC minimum value of the resistor. Schmitt trigger action at control input, makes the circuit tolerant to slower input rise and fall times across the entire V range from 2.3 V to 3.6 V. CC This device is fully specified for partial power-down applications using I . The I circuitry OFF OFF disables the output, preventing the damaging backflow current through the device when it is powered down. This product has been qualified to the Automotive Electronics Council (AEC) standard Q100 (Grade 1) and is suitable for use in automotive applications. 2. Features and benefits Automotive product qualification in accordance with AEC-Q100 (Grade 1) Specified from -40 C to +85 C and from -40 C to +125 C Supply voltage range from 2.3 V to 3.6 V High noise immunity Complies with JEDEC standard: JESD8-5 (2.3 V to 2.7 V) JESD8-B/JESD36 (2.7 V to 3.6 V) ESD protection: MIL-STD-883, method 3015 exceeds 2000 V HBM JESD22-A114F exceeds 2000 V MM JESD22-A115-A exceeds 200 V (C = 200 pF, R = 0 ) 5 switch connection between two ports Rail to rail switching on data I/O ports CMOS low power consumption Latch-up performance exceeds 250 mA per JESD78B Class I level A I circuitry provides partial Power-down mode operation OFF Multiple package options DHVQFN package with Side-Wettable Flanks enabling Automatic Optical Inspection (AOI) of solder jointsNexperia 74CBTLV3257-Q100 Quad 1-of-2 multiplexer/demultiplexer 3. Ordering information Table 1. Ordering information Type number Package Temperature range Name Description Version 74CBTLV3257D-Q100 -40 C to +125 C SO16 plastic small outline package 16 leads SOT109-1 body width 3.9 mm 74CBTLV3257PW-Q100 -40 C to +125 C TSSOP16 plastic thin shrink small outline package SOT403-1 16 leads body width 4.4 mm 74CBTLV3257BQ-Q100 -40 C to +125 C DHVQFN16 plastic dual in-line compatible SOT763-1 thermal enhanced very thin quad flat package no leads 16 terminals body 2.5 3.5 0.85 mm 4. Marking Table 2. Marking codes Type number Marking code 1 74CBTLV3257D-Q100 74CBTLV3257D 74CBTLV3257PW-Q100 TLV3257 74CBTLV3257BQ-Q100 TV3257 1 The pin 1 indicator is located on the lower left corner of the device, below the marking code. 5. Functional diagram 4 2 1A 1B1 3 1B2 7 5 2A 2B1 6 2B2 9 11 3A 3B1 10 3B2 12 14 4A 4B1 13 4B2 1 S 15 OE 001aal213 Fig. 1. Logic diagram 74CBTLV3257 Q100 All information provided in this document is subject to legal disclaimers. Nexperia B.V. 2020. All rights reserved Product data sheet Rev. 4 14 July 2020 2 / 17