HEF40106BT Nexperia

HEF40106B Hex inverting Schmitt trigger Rev. 8 10 December 2015 Product data sheet 1. General description The HEF40106B provides six inverting buffers. Each input has a Schmitt trigger circuit. The inverting buffer switches at different points for positive-going and negative-going signals. The difference between the positive voltage (V ) and the negative voltage (V ) T+ T is defined as hysteresis voltage (V ). H The HEF40106B may be used for enhanced noise immunity or to square up slowly changing waveforms. It operates over a recommended V power supply range of 3 V to 15 V referenced to V DD SS (usually ground). Unused inputs must be connected to V , V , or another input. DD SS 2. Features and benefits Schmitt trigger input discrimination Fully static operation 5 V, 10 V, and 15 V parametric ratings Standardized symmetrical output characteristics Specified from 40 C to +125 C Complies with JEDEC standard JESD 13-B 3. Applications Wave and pulse shapers Astable multivibrators Monostable multivibrators 4. Ordering information Table 1. Ordering information All types operate from 40 C to +125 C Type number Package Name Description Version HEF40106BT SO14 plastic small outline package 14 leads body width 3.9 mm SOT108-1 HEF40106BTT TSSOP14 plastic thin shrink small outline package 14 leads body width 4.4 mm SOT402-1HEF40106B NXP Semiconductors Hex inverting Schmitt trigger 5. Functional diagram < < < < < < < D PQ D P Q Fig 1. Functional diagram Fig 2. Logic diagram (one inverting buffer) 6. Pinning information 6.1 Pinning % (+ ) 9 9 DO D Fig 3. Pin configuration HEF40106B All information provided in this document is subject to legal disclaimers. NXP Semiconductors N.V. 2015. All rights reserved. Product data sheet Rev. 8 10 December 2015 2 of 15 66 < < < < < <