LD6836CX4/30H,315 Nexperia

LD6836 series Ultra low dropout regulators, low noise, 300 mA Rev. 2 5 October 2012 Product data sheet 1. Product profile 1.1 General description The LD6836 series is a small-size Low DropOut regulator (LDO) family with a typical voltage drop of 90 mV at 300 mA current rating. Operating input voltages can range from 2.3 V to 5.5 V. The devices are available with fixed output voltages between 1.2 V and 3.6 V. In disabled mode the LD6836x/xxH devices show a high-ohmic state at the output pin while the LD6836x/xxP devices contain a pull-down switching transistor to provide a low-ohmic output state (auto discharge function). The LD6836CX4 and LD6836CX4/C devices are in a 0.4 mm pitch Wafer-Level Chip-Scale Package (WLCSP) making them ideal for use in portable applications requiring component miniaturization. The LD6836TD devices are in a small SOT753 Surface-Mounted Device (SMD) plastic package. All devices are manufactured in monolithic silicon technology. 1.2 Features and benefits 300 mA output current rating Input voltage range 2.3 V to 5.5 V Fixed output voltage between 1.2 V and 3.6 V Dropout voltage 90 mV at 300 mA output rating Low quiescent current in shutdown mode (typical 0.1 A) 30 V RMS output noise voltage (typical value) at 10 Hz to 100 kHz Turn-on time 150 s 55 dB Power Supply Rejection Ratio (PSRR) at 1 kHz Over-temperature protection Output current limiter LD6836x/xxH: high-ohmic (3-state) output state when disabled LD6836x/xxP: low-ohmic output state when disabled (auto discharge function) Integrated ElectroStatic Discharge (ESD) protection up to 10 kV Human Body Model (HBM) WLCSP with 0.4 mm pitch and package size of 0.76 mm 0.76 mm 0.47 mm Small SOT753 SMD plastic package (SOT23-5 compatible) Pb-free, Restriction of Hazardous Substances (RoHS) compliant and free of halogen and antimony (dark green compliant)LD6836 series NXP Semiconductors Ultra low dropout regulators, low noise, 300 mA 1.3 Applications Analog and digital interfaces requiring lower than standard supply voltages in mobile appliances such as smartphones, mobile phone handsets and cordless telephones. Other typical applications are digital still cameras, mobile internet devices, personal navigation devices and portable media players. 2. Pinning information 2.1 Pinning bump A1 index area 1 2 A 5 4 B 001aao107 transparent top view, 132 solder balls facing down Fig 1. Pin configuration for SOT753 Fig 2. Pin configuration for WLCSP4 2.2 Pin description Table 1. Pin description for SOT753 Symbol Pin Description IN 1 regulator input voltage GND 2 supply ground EN 3 device enable input active HIGH n.c. 4 not connected OUT 5 regulator output voltage Table 2. Pin description for WLCSP4 Symbol Pin Description GND A1 supply ground EN A2 device enable input active HIGH OUT B1 regulator output voltage IN B2 regulator input voltage LD6836 SER All information provided in this document is subject to legal disclaimers. NXP B.V. 2012. All rights reserved. Product data sheet Rev. 2 5 October 2012 2 of 28