UVP1H330MPA Nichicon

ALUMINUM ELECTROLYTIC CAPACITORS ALUMINUM ELECTROLYTIC CAPACITORS Bi-Polarized UVC UVP Dimensions Standard bi-polarized series for entertainment electronics. Leakage Current Compliant to the RoHS directive (2011/65/EU,(EU)2015/863). Rated Voltage Rated Rated Ripple Case Size A UEP V Capacitance tan mArms Part Number DLmm at 20 after code F 105/120Hz 1 minute Wide Temperature 4.7 811.5 0.25 175.2 70 UVC24R7MPD 5.6 811.5 0.25 189.6 70 UVC25R6MPD UVP 8.2 816 0.25 231.2 85 UVC28R2MPD 400 10 1012.5 0.25 260 100 UVC2100MPD 2 Specifications 12 820 0.25 292 120 UVC2120MPD Item Performance Characteristics 15 1016 0.25 340 150 UVC2150MPD Category Temperature Range 40 to +85C 18 1020 0.25 388 200 UVC2180MPD Rated Voltage Range 6.3 to 100V For cut leads, formed leads or taped parts, please add the appropriate code after the size code (12th digit). Rated Capacitance Range 1 to 6800F If there is no size code in the part number, please add size code 1 and then add the appropriate code. Capacitance Tolerance 20% at 120Hz, 20C Leakage Current After 5 minutes application of rated voltage at 20C, leakage current is not more than 0.03CV or 3 (A), whichever is greater. For capacitance of more than 1000F, add 0.02 for every increase of 1000F. Measurement frequency : 120Hz at 20C Rated voltage (V) Tangent of loss angle (tan ) 6.3 10 16 25 35 50 63 100 Please refer to page 18, 19 about the formed or taped product spec. tan (MAX.) 0.26 0.24 0.22 0.20 0.16 0.14 0.12 0.10 Please refer to page 4 for the minimum order quantity. Measurement frequency : 120Hz Rated voltage (V) 6.3 10 16 25 35 50 63 100 Stability at Low Temperature Z25C / Z+20C 4 3 2 2 2 2 2 2 Impedance ratio (MAX.) Z40C / Z+20C 10 8 6 5 4 4 3 3 The specifications listed at right shall be met when Capacitance change Within 20% of the initial capacitance value the capacitors are restored to 20C after the rated tan Endurance 200% or less than the initial specified value voltage is applied for 2000 hours at 85C with the Leakage current Less than or equal to the initial specified value polarity inverted every 250 hours. After storing the capacitors under no load at 85C for 1000 hours and then performing voltage treatment based on JIS C 5101-4 Shelf Life clause 4.1 at 20C, they shall meet the specified values for the endurance characteristics listed above. Marking Printed with white color letter on black sleeve. Radial Lead Type Type numbering system (Example : 10V 47F) 1 2 31 42 53 64 75 86 97 108 119 10 11 d d Sleeve (PSleeve (P.E.T.) .E.T.) U V PU 1V AP 41 7A 04 M7 D0 DM D D Configuration Configuration Capacitance tolerance ( 20%) Capacitance tolerance ( 20%) Rated capacitance (47Rated capacitance (47F) F) Rated voltage (10V) Rated voltage (10V) Pressure Pressure relief vent relief vent MIN MINMIN MIN Series nameSeries name + MAX + MAX 15 4 L 15 4 L (6.3up) (6.3up) Type Type (mm) (mm) Configuration Configuration (L < 20) 1.5(L < 20) 1.5D 5 6.3 8 10 12.5 16 18 D 5 6.3 8 10 12.5 16 18 Pb-free leadwire Pb-free leadwire > D > D (L 20) 2.0(L 20) 2.0 Pb-free PET sleeve = = P 2.0P 2.52.0 3.52.5 5.03.5 5.05.0 7.55.0 7.57.5 7.5 Pb-free PET sleeve 5 DD d 0.5 0.5 0.6 0.6 0.6 0.8 0.8 5 DD d 0.5 0.5 0.6 0.6 0.6 0.8 0.8 6.3 ED 6.3 ED 8 10 8 10 PD PD Please refer to page 18 about the end seal configuration. 12.5 to 18 HD 12.5 to 18 HD Frequency coefficient of rated ripple current Frequency Cap.(F) 50 Hz 120 Hz 300 Hz 1 kHz 10 kHz or more 1 to 47 0.75 1.00 1.35 1.57 2.00 0100 to 4700 0.80 1.00 1.23 1.34 1.50 1000 to 6800 0.85 1.00 1.10 1.13 1.15 Dimension table in next page. CAT.8100J CAT.8100J P.270 P.271 +0.5 MAX D + 0.5 MAX D 0.5 P 0.5 PALUMINUM ELECTROLYTIC CAPACITORS ALUMINUM ELECTROLYTIC CAPACITORS UVP UVP Dimensions Dimensions Leakage Current Leakage Current Rated Voltage Rated Rated Ripple Rated Voltage Rated Rated Ripple Case Size Case Size A A V Capacitance tan mArms Part Number V Capacitance tan mArms Part Number DLmm at 20 after DLmm at 20 after code F 85/120Hz code F 85/120Hz 5 minutes 5 minutes 33 511 0.26 6.237 64 UVP0J330MDD 4.7 511 0.16 4.935 34 UVP1V4R7MDD 47 511 0.26 8.883 76 UVP0J470MDD 10 511 0.16 10.5 43 UVP1V100MDD 100 6.311 0.26 18.9 125 UVP0J101MED 22 6.311 0.16 23.1 73 UVP1V220MED 220 811.5 0.26 41.58 215 UVP0J221MPD 33 811.5 0.16 34.65 100 UVP1V330MPD 330 811.5 0.26 62.37 265 UVP0J331MPD 47 811.5 0.16 49.35 120 UVP1V470MPD 35 6.3 1V 470 1012.5 0.26 88.83 370 UVP0J471MPD 100 1016 0.16 105 230 UVP1V101MPD 0J 1000 1020 0.26 189 650 UVP0J102MPD 220 12.520 0.16 231 410 UVP1V221MHD 2200 12.525 0.28 415.8 1160 UVP0J222MHD 330 12.520 0.16 346.5 505 UVP1V331MHD 3300 1625 0.30 623.7 1570 UVP0J332MHD 470 12.525 0.16 493.5 655 UVP1V471MHD 1000 1631.5 0.16 1050 1140 UVP1V102MHD 4700 1631.5 0.32 888.3 2020 UVP0J472MHD 1 511 0.14 3 17 UVP1H010MDD 6800 1835.5 0.36 1285.2 2600 UVP0J682MHD 2.2 511 0.14 3.3 25 UVP1H2R2MDD 22 511 0.24 6.6 57 UVP1A220MDD 33 511 0.24 9.9 64 UVP1A330MDD 3.3 511 0.14 4.95 27 UVP1H3R3MDD 47 511 0.24 14.1 76 UVP1A470MDD 4.7 511 0.14 7.05 34 UVP1H4R7MDD 100 6.311 0.24 30 125 UVP1A101MED 10 6.311 0.14 15 52 UVP1H100MED 220 811.5 0.24 66 215 UVP1A221MPD 22 811.5 0.14 33 89 UVP1H220MPD 50 10 1H 330 1016 0.24 99 345 UVP1A331MPD 33 811.5 0.14 49.5 105 UVP1H330MPD 1A 470 1016 0.24 141 410 UVP1A471MPD 47 1012.5 0.14 70.5 150 UVP1H470MPD 1000 12.520 0.24 300 720 UVP1A102MHD 100 1020 0.14 150 265 UVP1H101MPD 2200 1625 0.26 660 1280 UVP1A222MHD 220 12.525 0.14 330 480 UVP1H221MHD 3300 1631.5 0.28 990 1690 UVP1A332MHD 330 1625 0.14 495 650 UVP1H331MHD 470 1631.5 0.14 705 835 UVP1H471MHD 4700 1835.5 0.30 1410 2160 UVP1A472MHD 3.3 511 0.12 6.237 28 UVP1J3R3MDD 10 511 0.22 4.8 42 UVP1C100MDD 22 511 0.22 10.56 57 UVP1C220MDD 4.7 6.311 0.12 8.883 34 UVP1J4R7MED 33 511 0.22 15.84 70 UVP1C330MDD 10 6.311 0.12 18.9 57 UVP1J100MED 47 6.311 0.22 22.56 95 UVP1C470MED 22 811.5 0.12 41.58 95 UVP1J220MPD 100 811.5 0.22 48 160 UVP1C101MPD 33 1012.5 0.12 62.37 135 UVP1J330MPD 63 16 1J 220 1012.5 0.22 105.6 275 UVP1C221MPD 47 1016 0.12 88.83 180 UVP1J470MPD 1C 330 1016 0.22 158.4 375 UVP1C331MPD 100 12.520 0.12 189 320 UVP1J101MHD 470 1020 0.22 225.6 485 UVP1C471MPD 220 1625 0.12 415.8 575 UVP1J221MHD 1000 12.525 0.22 480 855 UVP1C102MHD 330 1631.5 0.12 623.7 655 UVP1J331MHD 2200 1631.5 0.24 1056 1510 UVP1C222MHD 470 1835.5 0.12 888.3 965 UVP1J471MHD 1 511 0.10 3 21 UVP2A010MDD 3300 1835.5 0.26 1584 1980 UVP1C332MHD 2.2 6.311 0.10 6.6 34 UVP2A2R2MED 10 511 0.20 7.5 42 UVP1E100MDD 22 6.311 0.20 16.5 65 UVP1E220MED 3.3 6.311 0.10 9.9 39 UVP2A3R3MED 33 6.311 0.20 24.75 80 UVP1E330MED 4.7 6.311 0.10 14.1 47 UVP2A4R7MED 47 6.311 0.20 35.25 95 UVP1E470MED 10 811.5 0.10 30 71 UVP2A100MPD 100 2A 100 811.5 0.20 75 160 UVP1E101MPD 22 1016 0.10 66 135 UVP2A220MPD 25 1E 220 1016 0.20 165 305 UVP1E221MPD 33 12.520 0.10 99 220 UVP2A330MHD 330 12.520 0.20 247.5 450 UVP1E331MHD 47 12.520 0.10 141 240 UVP2A470MHD 470 12.520 0.20 352.5 540 UVP1E471MHD 100 1625 0.10 300 425 UVP2A101MHD 1000 1625 0.20 750 950 UVP1E102MHD 220 1835.5 0.10 660 720 UVP2A221MHD 2200 1835.5 0.22 1650 1620 UVP1E222MHD For cut leads, formed leads or taped parts, please add the appropriate code after the size code (12th digit). If there is no size code in the part number, please add size code 1 and then add the appropriate code. For cut leads, formed leads or taped parts, please add the appropriate code after the size code (12th digit). If there is no size code in the part number, please add size code 1 and then add the appropriate code. Please refer to page 18, 19 about the formed or taped product spec. Please refer to page 4 for the minimum order quantity. CAT.8100J CAT.8100J P.272 P.273