RoHS Compliant TFT LCD Module with Metallized Projective Capacitive Touch Panel (FLETAS touch panel) Specification Model: GTWV070VHA00P Specification No: DS-2076-0000-01 Date of Issue: September 27, 2019 (00) Revision: April 7, 2020 (01) Published by NORITAKE ITRON Corp. / Japan GTWV070VHA00P Notice for the Cautious Handling of LCD Modules Handling and usage precautions: Please carefully follow the appropriate product application notes and operation standards for proper usage, safe handling, and maximum performance. Construction Electrostatic Charge The FLETAS touch panel is made of glass. This product uses semiconductor components, When using this product, please be sure to so please take precautions against install a protective overlay such as cover electrostatic discharge during handling and glass, acrylic plate, etc. transportation. Please handle the FLETAS touch panel very (If it is judged that the product is defective due carefully as it may crack if it is pressed with to electrostatic destruction during its return to excessive force. our company, repair may be chargeable.) If this product is bent or twisted, it may cause the breakage of the product. Please handle it Power very carefully without bending or twisting. Please use a fully stabilized power supply. Please do not hold the FPC or other cables on If the power supplys voltage is outside of the this product as it may disconnect vital products rated supply voltage, the operation components. of the power supply circuit may become unstable. The end faces of the FLETAS touch panel are not polished. Please handle it very carefully to In-rush current flows when turning the power avoid injury. on. Please use a power supply that can withstand more than twice the normal current. The FLETAS touch panel is made of glass. It may be damaged by falling / impact / As a safety measure, we recommend using a excessive vibration. In the unlikely event that power supply with overcurrent protection and the glass shatters, please handle the glass a fuse. fragments very carefully to avoid injury. Please confirm that the power supply voltage The LCD panel generates heat. Please is within the rating of the connector. provide clearance for heat dissipation Please use a power cable with the appropriate between this product and its enclosure. Also, thickness and length. if electronic parts are densely located near this product, we recommend that it be cooled Interface with a fan or something similar. Please use an interface cable that has a length that has been thoroughly verified. Cable Connection Please do not remove the power cable and Implementation signal cable if the product is in an energized When installing this product, please make state. It may cause damage to the power sure that the on-board electronic components supply circuit and/or the I/O circuit of this product. and FPC do not touch the metal chassis. It may cause the product to malfunction. Do not input any signals while the product is If you need to make the product drip-proof, not powered. It may cause damage to the input/ output circuit. please use waterproof measures for products by using rubber etc. When plugging-in or unplugging the cable for this product, please do not apply excessive Please handle the product carefully when you force, such as by pulling the cable. take it out from the case and when you install Please plug-in or unplug in a straight direction the product, since it is a precision part. (alignment) with the terminal, without bending or twisting. If it is not properly plugged-in or unplugged, damage may occur to the cable or connector. Please avoid sudden bending of the cable from the base of the plug. It may cause damage to the cable or disconnection of the connector. If loads are expected on connectors and cables, use cable ties, etc. -2-