Document Number: MC06XS3517 Freescale Semiconductor Rev. 5.0, 4/2014 Technical Data Smart High-side Switch Module 06XS3517 (Triple 6.0 mOhm and Dual 17 mOhm) The 06XS3517 device is a five channel 12 V high-side switch module with High-side Switch integrated control and a high number of protective and diagnostic functions. It is designed for automotive lighting and industrial applications. The low R channels (three 6.0 mOhm, two 17 mOhm) can control DS(on) different types of lighting applications bulbs, Xenon-HID lights, and LEDs. Control, device configuration, and diagnostics are performed through a 16-bit SPI interface (3.3 V or 5.0 V). When communication with the external microcontroller or VDD is lost, the device enters a fail-safe operation mode, but remains operational, controllable, and protected. The channels are controlled by an external clock signal and allow staggered switch-on delay, to improve EMC performances. Programmable output voltage slew rates (individually programmable) further help improve Bottom View EMC performance. To avoid shutting off the device upon inrush current while still being able to closely track the load current, a dynamic overcurrent threshold profile is featured. Load current in each channel can FK SUFFIX be sensed. The duty cycle of the channels can be controlled independently 98ART10511D 24-PIN PQFN and the switching frequency of each of them can be doubled. The 06XS3517 is housed in a non-leaded Power QFN package with an Applications exposed pad. This device is powered using SMARTMOS technology. Low-voltage automotive lighting Halogen bulbs Features Light-emitting diodes (LEDs) Three 6.0 mOhm and two 17 mOhm protected high-side switches High beam Optional sixth channel with an external smart MOSFET Low beam 16-bit SPI communication interface with daisy chain capability Flashers Accurate temperature and current sensing Low-voltage industrial lighting Fail-safe mode including autorestart PWM module with programmable switch-on delay and frequency prescaler Overvoltage, undervoltage, overcurrent, overtemperature, and reverse battery protections Dedicated bulb overcurrent protection with inrush current handling Sleep mode with low current consumption Normal operating range 7.0 V to 20 V, extended operating range 6.0 V - 28 V 12 V 12 V 5.0 V 06XS3517 VCC VBAT LIMP Watchdog CP FLASHER OUT1 IGN RSTB OUT2 CLOCK OUT3 CSB MCU OUT4 FOG SO OUT5 SI FETIN Smart SCLK Switch CSNS GND FETOUT Figure 1. 06XS3517 Simplified Application Diagram Freescale Semiconductor, Inc., 2012 - 2014. All rights reserved.ORDERABLE PARTS ORDERABLE PARTS Table 1. Orderable Part Variations Temperature (T ) Part Number Package A (1) MC06XS3517AFK -40C to 125 C 24 PQFN Notes 1. To order parts in Tape & Reel, add the R2 suffix to the part number. MC06XS3517 Analog Integrated Circuit Device Data 2 Freescale Semiconductor